Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Update failed - not in Paneldue mode

    Scheduled Pinned Locked Moved
    PanelDue
    3
    3
    152
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Michael Subergundefined
      Michael Suberg
      last edited by

      Hello everyone, after I was able to bring my board back to life with Bossa and the latest FW 3.4 update is now running, I wanted to update the Paneldue V3 5" last but not least.
      Unfortunately I get the message: M997: Aux Port 0 is not enable or not in Paneldue mode.
      What do I have to do to be able to install the latest update?

      dc42undefined 1 Reply Last reply Reply Quote 0
      • dc42undefined
        dc42 administrators @Michael Suberg
        last edited by

        @michael-suberg check that your config.g file contains the correct M575 command to support PanelDue.

        Duet WiFi hardware designer and firmware engineer
        Please do not ask me for Duet support via PM or email, use the forum
        http://www.escher3d.com, https://miscsolutions.wordpress.com

        1 Reply Last reply Reply Quote 0
        • Phaedruxundefined
          Phaedrux Moderator
          last edited by

          The PanelDue firmware may also be too old to allow update from the duet. What version does it show in the settings page? You may need to update it once manually using bossa before you are able to update it directly from the Duet.

          https://docs.duet3d.com/en/User_manual/RepRapFirmware/Updating_PanelDue

          Z-Bot CoreXY Build | Thingiverse Profile

          1 Reply Last reply Reply Quote 0
          • First post
            Last post
          Unless otherwise noted, all forum content is licensed under CC-BY-SA