PID for version 3.4
-
Hello. Im trying to see how the PID works now on version 3.4 stable. The PID values I had for my hotend and for my chamber do not work anymore after upgrading from 3.3.
I have been able to auto tune PID for the hotend, but it has been imposible for me to do it for the heated chamber (https://forum.duet3d.com/topic/27985/heated-chamber-pid-and-3-4-stable?_=1651234418167)Documentation says I can use the old PID values, I tried that, but they just dont work (they do on 3.3). PID settings on 3.4 are new (to me at least), is there a docuemtnation wich explains how to manually tune them and an explanation of what the received errors means in order to debug the tunning?
Board duet3, firmware 3.4 stable, SBC configuration
Thanks in advance
-
You can see the changes to the M307 parameters here: https://docs.duet3d.com/User_manual/Reference/Gcodes#m307-set-or-report-heating-process-parameters
Perhaps we should have continued your previous thread.
