• Tags
  • Documentation
  • Order
  • Register
  • Login
Duet3D Logo Duet3D
  • Tags
  • Documentation
  • Order
  • Register
  • Login

Thermocoupler Daughter Board Fault Light

Scheduled Pinned Locked Moved
Duet Hardware and wiring
2
2
428
Loading More Posts
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • undefined
    zerogee
    last edited by 12 Oct 2017, 18:18

    My thermocoupler connection on the daughter board is not working, and I'm getting is the 2000c error reading. In addition the "fault" light is lit on the daughter board. I could not find any documentation on the "fault" light. can someone tell me what it means. I also unconnected all wires to the daughter board turn on the main board and the daughter board fault light remains "on" with no wires connected. I reset the main board a number of time and re-seated the daughter board but the fault light on the daughter board will not go out. suggestion???

    1 Reply Last reply Reply Quote 0
    • undefined
      dc42 administrators
      last edited by 12 Oct 2017, 20:15

      The fault led will illuminate if the thermocouple is not connected or it is shorted to something else.

      Duet WiFi hardware designer and firmware engineer
      Please do not ask me for Duet support via PM or email, use the forum
      http://www.escher3d.com, https://miscsolutions.wordpress.com

      1 Reply Last reply Reply Quote 0
      2 out of 2
      • First post
        2/2
        Last post
      Unless otherwise noted, all forum content is licensed under CC-BY-SA