How do I change the max temperature for my hotends?

[silver1882]

I have this in the config.g but it still will not let me go that hot.

M143 H1 S290

[dc42]

@silver1882 some suggestions:

1. Run M143 H1 with no additional parameters to see if the command was accepted.
2. Check that the M143 H1 command in config.g is later in the file that the M950 H1 command that creates the heater.
3. Run M98 P"config.g" to check for errors in config.g.

[silver1882]

@dc42 said in How do I change the max temperature for my hotends?:

M143 H1

Thanks for the suggestions. I figured the problem out I have to set the temp 1c higher than what I want my max to be in my config.g file.