Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    problem with firmware

    Scheduled Pinned Locked Moved
    Firmware installation
    2
    5
    220
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • boxeddroidundefined
      boxeddroid
      last edited by boxeddroid

      So i have designed and built 12 different cnc machines and this is the first time using RRF. I am using a duet 2 board i was able to connect to the board with dwc and I tried uploading fw to 3.3. I then did some research and realized I had to update to 3 first. I did this and tried to go back to 3. When I try to connect via dwc I still get the incompatible fw error. If I hit reset i get a json error.
      Edit.
      So I seen this thread and I connect to the board with yat and i get rrf 3.0 with m115. Ive put a fresh copy of the sd card zip on the card after I thought I could just throw the bin file in the /sys foler.

      1 Reply Last reply Reply Quote 0
      • Phaedruxundefined
        Phaedrux Moderator
        last edited by

        So what firmware is loaded when you send M115 via YAT? 3.0?

        In that case you just need to place the correct DWC files for that version on the SD card and you can connect to the IP address of the Duet if you've connected it to your network. Once you have access to DWC you can upload the latest firmware update.

        https://github.com/Duet3D/RepRapFirmware/releases/download/2.05.1/DuetWebControl-SD-2.0.7.zip

        Extract that zip file into the /www folder on the SD card, replacing all the files in there.

        Then when you've connected to the web interface, you can upload this entire zip file as is to update to the latest.

        https://github.com/Duet3D/RepRapFirmware/releases/download/3.4.1/Duet2and3Firmware-3.4.1.zip

        Z-Bot CoreXY Build | Thingiverse Profile

        boxeddroidundefined 1 Reply Last reply Reply Quote 0
        • boxeddroidundefined
          boxeddroid @Phaedrux
          last edited by

          @phaedrux m115 shows rrf 3.0.
          I'm away from the printer once I get home ill try ur suggestion

          1 Reply Last reply Reply Quote 0
          • boxeddroidundefined
            boxeddroid
            last edited by

            Thank you very much.

            3 was loaded after i extracted the files to the card. I tried the zip method to install 3.4.1, but it said there was missing bin files. So i just updated the 3.4.1 bin file manually

            1 Reply Last reply Reply Quote 0
            • Phaedruxundefined
              Phaedrux Moderator
              last edited by

              Does your firmware and DWC versions now match at 3.4.1?

              Z-Bot CoreXY Build | Thingiverse Profile

              1 Reply Last reply Reply Quote 0
              • First post
                Last post
              Unless otherwise noted, all forum content is licensed under CC-BY-SA