duet 2 wifi setting up BLtouch
-
can i use zprob 3v pin and mod pin with the e0stop pins for bltouch
3.4.1 -
@downshift64 said in duet 2 wifi setting up BLtouch:
can i use zprob 3v pin and mod pin with the e0stop pins for bltouch
3.4.1As I recall, and it's been awhile, the mod pin will not work with the BLTouch.
Frederick
-
@fcwilt can you use a z stop switch and a bltouch i would like to home my cartesian printer at the top of Z and use the bltouch also
-
@downshift64 said in duet 2 wifi setting up BLtouch:
@fcwilt can you use a z stop switch and a bltouch i would like to home my cartesian printer at the top of Z and use the bltouch also
Certainly.
All of my printers had Z probes and all of my printers have Z endstops at the low (min) end of the the axis.
Homing with a Z endstop can result in simpler and quicker code.
You can, if needs be, have two endstop switches, one at the low end for homing, one at the high end for resuming a print.
Of course you need to have routines to change the configuration of the M574 for the Z endstop, since it can only handle one at a time.
Frederick
