Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Cannot update Duet WiFi 1.02 + DueX5

    Scheduled Pinned Locked Moved
    Firmware installation
    2
    5
    255
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Empiricusundefined
      Empiricus
      last edited by

      Software Information
      Firmware Name: RepRapFirmware for Duet 2 WiFi/Ethernet
      Firmware Electronics: Duet WiFi 1.02 or later + DueX5
      Firmware Version: 2.02(RTOS) (2018-12-24b1)
      WiFi Server Version: 1.22
      Web Interface Version: 1.22.6
      Web Interface by Christian Hammacher

      Bought an magnet filament sensor for my Railcore and would like to update to the latest firmware. Using DWC the Duet2CombinedFirmware.bin is downloaded, install seems to run but no restart and no change in reported version after manual restart. Please advise.

      DIY-O-Sphereundefined 1 Reply Last reply Reply Quote 0
      • DIY-O-Sphereundefined
        DIY-O-Sphere @Empiricus
        last edited by

        @empiricus
        https://docs.duet3d.com/User_manual/RepRapFirmware/Migration_RRF2_to_RRF3

        "You must upgrade to firmware 3.0 as an intermediate step"

        (UTC+1)

        Empiricusundefined 2 Replies Last reply Reply Quote 0
        • Empiricusundefined
          Empiricus @DIY-O-Sphere
          last edited by

          @diy-o-sphere What? Please elaborate. Is there a better description?

          DIY-O-Sphereundefined 1 Reply Last reply Reply Quote 0
          • DIY-O-Sphereundefined
            DIY-O-Sphere @Empiricus
            last edited by

            @empiricus
            Note: it is not possible to upgrade a Duet WiFi, Ethernet or Maestro directly from firmware 1.x or 2.x to 3.01 or later. You must upgrade to firmware 3.0 as an intermediate step.

            (UTC+1)

            1 Reply Last reply Reply Quote 0
            • Empiricusundefined
              Empiricus @DIY-O-Sphere
              last edited by

              @diy-o-sphere Now DWC is offline. panel shows the web server started but blank screen when I connect to the IP. I am not trying to upgrade from 2 to 3 just 2.02 to the latest 2 to use the magnet sensor.

              1 Reply Last reply Reply Quote 0
              • First post
                Last post
              Unless otherwise noted, all forum content is licensed under CC-BY-SA