Flow in Cura

[TRATOON]

Does anybody know where I can find a flow setting in cura in mm^3/s?

while I was looking for it, I found that this setting mentioned it, but I can't find it.

[Phaedrux]

Cura does not have an awareness of volumetric flow. You'll have to calculate that yourself.

https://github.com/Ultimaker/Cura/issues/5248

MarkMan0 created this issue 30 Jan 2019, 16:58 in Ultimaker/Cura

open Limit extruder feedrate for printing and retraction #5248

[oliof]

Cura does not have this. I know some people hacked it in using some usually unused machine properties, but I can't find the refer nice right now.