• Tags
  • Documentation
  • Order
  • Register
  • Login
Duet3D Logo Duet3D
  • Tags
  • Documentation
  • Order
  • Register
  • Login

RRF3 webUI keeps popping Printing message

Scheduled Pinned Locked Moved Solved
Duet Web Control
2
4
152
Loading More Posts
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • undefined
    daninet
    last edited by 14 Aug 2022, 08:14

    Hi, I have RRF3.4.1 on duet2 wifi. I'm using firefox v103. When I start to print there is an endless flood of "Printing..." message. On paneldue there is a single message I can close. Not on the webui. I made a video of it but this forum is not allowing google drive links to be posted. Imagine a popup message on the bottom every half a second for the duration of printing.

    undefined 1 Reply Last reply 14 Aug 2022, 08:49 Reply Quote 0
    • undefined
      dc42 administrators @daninet
      last edited by dc42 14 Aug 2022, 08:49

      @daninet first, please check that both RRF and DWC are at version 3.4.1. You can check this on the Settings->General and Settings->Machine Specific tabs of DWC.

      If you are getting one message per layer, check whether your slicer has inserted a M117 command in the generated GCode file at each layer change.

      Duet WiFi hardware designer and firmware engineer
      Please do not ask me for Duet support via PM or email, use the forum
      http://www.escher3d.com, https://miscsolutions.wordpress.com

      undefined 1 Reply Last reply 14 Aug 2022, 12:14 Reply Quote 0
      • undefined
        daninet @dc42
        last edited by 14 Aug 2022, 12:14

        @dc42 thank you, you were right, i had an old dwc version

        undefined 1 Reply Last reply 14 Aug 2022, 17:17 Reply Quote 0
        • undefined
          dc42 administrators @daninet
          last edited by 14 Aug 2022, 17:17

          @daninet thanks, I'll mark this as solved then.

          Duet WiFi hardware designer and firmware engineer
          Please do not ask me for Duet support via PM or email, use the forum
          http://www.escher3d.com, https://miscsolutions.wordpress.com

          1 Reply Last reply Reply Quote 0
          • undefined dc42 marked this topic as a question 14 Aug 2022, 17:17
          • undefined dc42 has marked this topic as solved 14 Aug 2022, 17:17
          4 out of 4
          • First post
            4/4
            Last post
          Unless otherwise noted, all forum content is licensed under CC-BY-SA