Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    2 Extruders only 1 steps

    Scheduled Pinned Locked Moved
    General Discussion
    2
    3
    545
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • FunBogManundefined
      FunBogMan
      last edited by

      Hi All
      I am experimenting with a geared extruder which has been calibrated to get the step value right. However my second extruder is non geared and requires a completely different step value. Can the different values both be put into config.g, can only see a value for one E?
      Thanks for any assistance.

      1 Reply Last reply Reply Quote 0
      • dc42undefined
        dc42 administrators
        last edited by

        Yes, you can use (for example) M92 E450:100 in config.g to set 450 steps/mm for the first extruder and 100 for the second one.

        Duet WiFi hardware designer and firmware engineer
        Please do not ask me for Duet support via PM or email, use the forum
        http://www.escher3d.com, https://miscsolutions.wordpress.com

        1 Reply Last reply Reply Quote 0
        • FunBogManundefined
          FunBogMan
          last edited by

          Excellent, thanks for that.

          1 Reply Last reply Reply Quote 0
          • First post
            Last post
          Unless otherwise noted, all forum content is licensed under CC-BY-SA