Add an offset on Z
-
Is it possible to add an offset on z axis based on extruder temperature?
My ellet extruder changes lenght based on the printing temperature, how could i authomatcally add an offset based on temp of the extruder noozle?
-
undefined Phaedrux moved this topic from Using Duet Controllers
-
Yes I think this should be possible using conditional gcode on the daemon.g file. See here for a primer: https://docs.duet3d.com/en/User_manual/Reference/Gcode_meta_commands
-
@phaedrux Grazie mille, sempre soler nelle rsosti.
