Issue with board during update
-
@IBAD24
Update: If I plug it in to usb it starts to smoke. was never plugged into mains or psu. -
Can you share some photos of the board? Where did the smoke come from?
Was it connected to mains and USB originally?
-
@Phaedrux it was never connected to anything but usb. I will include photos but I cannot see anything. it is getting hot near the usb port.
-
When and where was it purchased?
-
@Phaedrux it was over a year ago when I began my build but I just got it out last week as I'm waiting on my glass to come in and that is the last part.
Amazon
Ordered on May 6, 2021 (1 item)
Duet 2 Wifi 3D Printer Motherboard Kit -
Who was the amazon seller? There are many clones on there.
-
@Phaedrux FYSETC
-
That is a clone, sorry. I suggest you try and get a return with amazon.
-
@Phaedrux Refund is being processed. I'm going authentic this time! Thank you for your support!
-
When you get your new board, start here: https://docs.duet3d.com/en/Start_Here
Come back if you have any questions.