Magnetic Filament Sensor - Error codes

[Diamondback]

Hey,

I'm interested to learn what the different error codes mean that are sent to filament-error.g (and which ones exist in the first place), but I haven't found any documentation on them.

Can anyone help?

[T3P3Tony]

@Diamondback the error codes reported by the flashing LEDs are explained here:
https://docs.duet3d.com/en/User_manual/Connecting_hardware/Sensors_filament#troubleshooting

@dc42 will need to confirm if these same error types are reported by the event system.

[T3P3Tony]

@Diamondback I have provisionally updated thr documentation here:

https://docs.duet3d.com/en/User_manual/Connecting_hardware/Sensors_filament#troubleshooting

[Diamondback]

@T3P3Tony Awesome, thanks, from what i can see, the event itself only receives an int rather than a string about the error, can you add those as well?
(triggering the switch, ie "noFilament" appears to be 3 for example)

[T3P3Tony]

@Diamondback thanks for checking, yes i will do

[T3P3Tony]

@Diamondback

https://docs.duet3d.com/User_manual/Connecting_hardware/Sensors_filament#event-system-filament-error-events

[Diamondback]

@T3P3Tony Thank you very much!