No ethernet connection after upgrade

[xxexx]

After a failed attempt to upgrade via DWC/Ethernet i did upgrade my duet 2 via DWC/USB:

m115
FIRMWARE_NAME: RepRapFirmware for Duet 2 WiFi/Ethernet FIRMWARE_VERSION: 3.4.5 ELECTRONICS: Duet Ethernet 1.02 or later FIRMWARE_DATE: 2022-11-30 19:36:12<LF>ok<LF>
M552 S1 P0.0.0.0
ok<LF>Network running, IP address = 192.168.178.58<LF>

and DWC via USB runs perfectly.

But now i am unable to connect to DWC via ethernet - the 5V led is lit, but the ethernet connectivity leds are not blinking (as they are with USB connected).

[droftarts]

@xxexx You made a new thread? What was wrong with the old one?!
https://forum.duet3d.com/topic/31153/duet-2-ethernet-no-ethernet-after-firmware-upgrade/
Please don't make multiple threads for the same issue. If you feel it should be in a different category, it can be moved on request, if you can't.

Ian

[xxexx]

@droftarts

i dont get any more answers in the general thread so now i try in the Firmware thread. I did now delete the other thread.

[xxexx]

This post is deleted!

[xxexx]

@droftarts So what do im do now?

[droftarts]

@xxexx see the old thread where I replied. I'm locking this one.

Ian