3.5b1 Reset reason: StuckInSpinLoop?

[Diamondback]

@dc42 I played around with the DWC polling time this morning but didn't get any immediate results, I'll play around with it some more and see if I can maybe make it go away by setting it much higher?

[dc42]

@Diamondback my next step will be to disconnect DWC completely and then see if I can provoke the reset by sending the command to run the macro over USB.

[Diamondback]

@dc42 Hm, I guess I can try the same by having the issue triggered by daemon.g and not having any browser connected to it? Or does DWC still do stuff in the background then somehow?

[dc42]

Confirmed, if I send the command over USB with DWC not connected, it doesn't reset. If I connect DWC and send the command over USB, it resets.

[dc42]

@Diamondback please try the firmware at https://www.dropbox.com/sh/z9f9v517t9txqh9/AACG2Dycr_EghlN4p1HsYVUNa?dl=0. It fixes the case that I was able to reproduce. The change is quite extensive, so please use it with caution.

[Diamondback]

@dc42 Will do! This includes the previous array memory leak fix?

[dc42]

@Diamondback yes it does. If you get any resets, please post a subsequent M122 report.

[Diamondback]

@dc42 Looking promising so far, no more resets atm.
I also yesterday played around more with the DWC polling frequency between 50ms and 60s and as you assumed, with lower values it was happening much quicker.

[Diamondback]

@dc42 Finally working
https://www.dropbox.com/s/fyguad75k8g2ffe/VID_20230124_102416.mp4?dl=0

[Diamondback]

@dc42 happy to report, no further resets over the day Many thanks!