Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Prusa mk3s with RepRap

    Scheduled Pinned Locked Moved
    Firmware installation
    4
    7
    310
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • printnoobundefined
      printnoob
      last edited by

      I set up my mk3s with the reprap firmware, but Im a bit struggling with the sensorless homing and the setup of the super pinda... can sbdy of you other prusa users share your config files with me? That would be pretty awesome 🙂

      1 Reply Last reply Reply Quote 0
      • Proschi3Dundefined
        Proschi3D
        last edited by

        look here

        https://github.com/CNCKitchen/PrusaDUET

        Love my Duet 3 Mini.
        https://www.instagram.com/proschi3d
        https://youtube.com/@proschi3d
        https://www.proschi3d.de

        printnoobundefined 1 Reply Last reply Reply Quote 1
        • printnoobundefined
          printnoob @Proschi3D
          last edited by

          @Proschi78 Im having a duet 2 wifi, can I just take his config.g and paste it into mine, or is the gcode betweend the Duet 3 Mini different?

          jay_s_ukundefined 1 Reply Last reply Reply Quote 0
          • jay_s_ukundefined
            jay_s_uk @printnoob
            last edited by

            @printnoob the pin names are different so you'll need to change those

            Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

            printnoobundefined 1 Reply Last reply Reply Quote 0
            • printnoobundefined
              printnoob @jay_s_uk
              last edited by

              I am really struggling with it right now... The x-Axis homes on the right side, which isn good because the superpinda is then out of the printplate and doesnt stop the printhead... and when Im heating the print bed I get an error, which says that the temperature needs to rise 2.3 degrees per second but it only does 0.3 so its defect, how do i change that value of 2.3 degree?
              Could somebody please give me his WHOLE mk3s config files?

              printnoobundefined 1 Reply Last reply Reply Quote 0
              • printnoobundefined
                printnoob @printnoob
                last edited by

                @printnoob And another problem I encountered, one of the Z motors isnt running smooth. When switching the pins on the mainboard, the other motor is the one stuttering, so its because of the board or the firmware

                1 Reply Last reply Reply Quote 0
                • Phaedruxundefined
                  Phaedrux Moderator
                  last edited by

                  It's not really possible to just use someone else's config unless the printer is literally identical. You may be better off going through the config tool and getting a set of config files of your own to work with and going through the commissioning guide to help get it all setup.

                  https://configtool.reprapfirmware.org/Start

                  https://docs.duet3d.com/en/How_to_guides/Commissioning

                  You can still use the config files from others as examples.

                  The homing moves are controlled by the homex.g homeyg. homez.g and homeall.g macro files in combination with the M574 command in your config.g

                  You can find the documentation on stall detection and sensorless homing here: https://docs.duet3d.com/en/User_manual/Connecting_hardware/Sensors_stall_detection

                  The heater error means you haven't tuned the heater yet. You need to do this for the bed and hotend heater.

                  You can get info on heater tuning here: https://docs.duet3d.com/en/User_manual/Connecting_hardware/Heaters_tuning

                  Z-Bot CoreXY Build | Thingiverse Profile

                  1 Reply Last reply Reply Quote 0
                  • First post
                    Last post
                  Unless otherwise noted, all forum content is licensed under CC-BY-SA