Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Can Bossa connect to a running duet2 wifi board?

    Scheduled Pinned Locked Moved Solved
    Firmware installation
    2
    3
    157
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • rtuinilaundefined
      rtuinila
      last edited by

      I'm about to migrate from RRF2 to RRF3 and wanted to test all the utilities needed before I bricked my Duet2 Wifi. While Yat is able to connect through my usb cable, Bossa is not. When I select the com port my Duet2 is connected to I get a message back saying Bossa could not connect to the device. For informational purposes I did install the Duet driver for that com port before I tried any of this.
      I've programmed a lot of devices in my career where some need the board to be in "reset" for the programmer to work and others don't. Is the Atmel on the board one of those that need to be in "reset"?

      Thanks!

      jay_s_ukundefined 1 Reply Last reply Reply Quote 0
      • jay_s_ukundefined
        jay_s_uk @rtuinila
        last edited by

        @rtuinila yes. It needs to be erased to go into bossa mode

        Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

        1 Reply Last reply Reply Quote 1
        • rtuinilaundefined
          rtuinila
          last edited by

          Thanks for the reply!

          1 Reply Last reply Reply Quote 0
          • dc42undefined dc42 marked this topic as a question
          • dc42undefined dc42 has marked this topic as solved
          • First post
            Last post
          Unless otherwise noted, all forum content is licensed under CC-BY-SA