Deut3 Mini5+ unable to connect to wifi network

Behrouz-AKT

I am trying to connect to WiFi but having no luck.

I have managed to connect via serial tool
The board version is 1.0.2
I am using FIRMWARE_NAME: RepRapFirmware for Duet 3 Mini 5+ FIRMWARE_VERSION: 3.4.0 ELECTRONICS: Duet 3 Mini5plus WiFi FIRMWARE_DATE: 2022-03-15 18:59:17

Her is what I get when I use
M552
WiFi module is connected to access point , IP address 255.255.255.255
ok

and this what i get for remembered networks
M587
Remembered networks:
TNCAPF2FD81 IP=192.168.1.14 GW=0.0.0.0 NM=0.0.0.0
) IP=0.41.2.0 GW=254.8.2.0 NM=0.41.2.0
ok

Not even close to my network even after i have set the SSID and Wireless password

perform an M552 S0
give network idle

but when I try to enable with M552 S1
I get
:
:
WiFi module is idle
WiFi reported error: network scan failed
WiFi module is idle
Error retrieving WiFi status message: SPI timeout
WiFi module is idle
Failed to change WiFi mode: SPI timeout

Any thoughts on what I mighbt be doing wrong?

Phaedrux

use M588 S"*" to clear all currently saved SSIDs

and then use M587 S"networkname" P"password" to re-add your SSID

If that doesn't work, please try sending M997 S1 to reflash the wifi module.

Does your board have an external antenna?

Behrouz-AKT

Fantastic, clearing the the SSID worked nicely

Yes it has the external antenna. Thanks for your help