error after update
-
Hi,
I just updated from 2.05.1 to 3 and i get this error:
"Error: Temperature reading fault on heater 3: unknown temperature sensor channel"and it shoes 2000 in the tempeture
what can i do ?
-
@Melacko3004 have a look here https://docs.duet3d.com/en/User_manual/RepRapFirmware/Migration_RRF2_to_RRF3
there were a lot of config changes between version 2 and version 3 -
@jay_s_uk
Wall evrething works but what i mentioned...
It requires a lot off changing to fix the problem ?
I thing i changed what i need in the config file but still nothing changed.. -
So i dont know what to do next
-
@Melacko3004 best generate a new config using the config tool and then move your settings across https://configtool.reprapfirmware.org/
-
@jay_s_uk and how i load it to the printer ?
-
@Melacko3004 using the web interface
-
@Melacko3004 said in error after update:
heater 3: unknown temperature sensor channel
Post your config.g.
