0.85 Duet firmware
-
Hey All. I've had my 0.85 Duet since they were first released. I'm running 1.26.1 (2020-02-09b1) firmware with 1.22.6 web interface.
I recently rebuilt the z-axis on my Smartrapcore CoreXY printer and looking for some newer firmware to see what has been added, but none of them say they are for the 0.85 hardware. So it looks like my hardware has been unsupported which is ok, everything is working as expected.
I took a look at Klipper to see if it supported the 0.85 duet hardware but it's not listed so it looks like I can't move forward with this hardware to put any kind of current feature set firmware on it.
Is my only course of action to replace the 0.85 with a duet 2 or 3?
Joe
-
Actually you can run 2.05.1 which is the last release for RRF2.https://github.com/Duet3D/RepRapFirmware/releases/tag/2.05.1
Sorry, scratch that, I see you're actually already running that firmware (1.26.1)
If you wanted the features of the more modern firmware, a Duet 2 wifi or Duet 3 mini5+ would be your equivalent boards.
-
@Phaedrux Thank you for confirming this. I'll keep an eye out.
Joe Schalk
