Inverting Logic on Error Pin

elmw

Hello,

I am trying to invert the Duet 3 Main 6XD WD1256 Board logic for the error pin on the driver slots.

Is this a possibility via the config.g file within the duet interface?

; Setting logic of the error pins to be on standby when first turning the duet on - prevents accidents 

M569 P0.2.4 R1

The intention of this via searching the web was to change the logic on drive number 2 and pin 4 with the R1 command to invert the logic.

T3P3Tony

@elmw you can't use M569 for that.

The documentation is here: