3.5.0~rc.1 duet3 mini5+
-
When updating from 3.46 on a duet 3Mini5+ SBC I get this error:
"Setting up reprapfirmware (3.5.0~rc.1-1) ...
[fatal] Could not connect to Duet: Timeout while waiting for transfer ready pin"when using "sudo apt dist-upgrade"
happened twice, the first time it stalled at 95% the second after a reflash of the card gave me the message, but it continued to the end of the upgrade
I do have a blown stepper, but it works fine with the add-in 2 stepper card.
Regards simon
-
Can you share the results of M122?
-
@Phaedrux m122
This is fixed, It was my error when updating
-
undefined Phaedrux marked this topic as a question
-
undefined Phaedrux has marked this topic as solved
