RC3.5.0rc-1 I've gone wrong somewhere

Paddy

Hi,

I upgraded my Duet2 WiFi from 3.4.6 to 3.5.0rc-1 and now can't connect over wifi.
The console shows the following;

TELNET is disabled
Warning: Heater 0 predicted maximum temperature at full power is 321oC
Warning: Heater 1 predicted maximum temperature at full power is 493oC
WiFi module is started
Error: WiFi module reported: Authentication failed
WiFi module is idle
Error: Wifi module reported: Timed out
WiFi module is idle
WiFi module is connected to access point Poljot
IP address 192.168.1.151

Although the text appears static the minutes and seconds that proceed each line is changing, so it's in a loop.

The files I uploaded were;
Duet2CombinedFirmware.bin
DuetWiFiModule_32S3.bin
DuetWiFiServer.bin
DuetWebControl-SD.zip

I know it's something I've done to cause this, but any help to recover would be appreciated

Many thanks.

Phaedrux

Can you try sending M997 S1 to trigger a reflash of the wifi server firmware?

Paddy

@Phaedrux thanks for the reply but unfortunately it's just the same.

Phaedrux

Try replacing the wifi server bin file with one from an older version. Like 1.27 and then reflashing again.

Paddy

@Phaedrux Brilliant - that sorted it. I used the wifi server from 3.4.6.

Thanks again.