Can't connect to Duet Web Control
-
Hi,
First tie set-up with workbee cnc & Duet 3D.
YAT terminal says I'm connected to Duet3D but it is not returning an IP address.
I got the duet 3d IP address from the router but when I type it into a web browser it fails to connect - error:
Windows Network Diagnostics
Issues found
website (192.168.0.201) is online but isn't responding to con... Detected
Contact the service provider or owner of the remote system ... Completed
Issues found
< website (192.168.0.201) is online but isn't responding to
connection attempts.
Detected
The remote computer isn’t responding to connections on port 80, possibly due
to firewall or security policy settings, or because it might be temporarily
unavailable. Windows couldn’t find any problems with the firewall on your
computer.WiFi module started
M587 S"HOUSE_EX" P"ipswich1"
ok
m122
=== Diagnostics ===
RepRapFirmware for Duet 2 WiFi/Ethernet version 3.3 (2021-06-15 21:44:54) running on Duet WiFi 1.02 or later
Board ID: 08DGM-917DA-G4MS8-6J1F4-3SN6T-1TV78
Used output buffers: 1 of 24 (12 max)
=== RTOS ===
Static ram: 23876
Dynamic ram: 74328 of which 12 recycled
Never used RAM 13344, free system stack 193 words
Tasks: NETWORK(ready,7.5%,371) HEAT(delaying,0.0%,386) Move(notifyWait,0.1%,364) MAIN(running,92.4%,423) IDLE(ready,0.0%,29), total 100.0%
Owned mutexes: USB(MAIN)
=== Platform ===
Last reset 00:11:37 ago, cause: power up
Last software reset at 2023-05-22 20:00, reason: User, GCodes spinning, available RAM 13160, slot 1
Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x0041f000 BFAR 0xe000ed38 SP 0x00000000 Task MAIN Freestk 0 n/a
Error status: 0x00
Step timer max interval 0
MCU temperature: min 24.7, current 28.5, max 29.0
Supply voltage: min 0.5, current 0.5, max 0.6, under voltage events: 0, over voltage events: 0, power good: no
Heap OK, handles allocated/used 99/1, heap memory allocated/used/recyclable 2048/24/0, gc cycles 0
Driver 0: position 0, ok, SG min/max not available
Driver 1: position 0, ok, SG min/max not available
Driver 2: position 0, ok, SG min/max not available
Driver 3: position 0, ok, SG min/max not available
Driver 4: position 0, ok, SG min/max not available
Driver 5: position 0
Driver 6: position 0
Driver 7: position 0
Driver 8: position 0
Driver 9: position 0
Driver 10: position 0
Driver 11: position 0
Date/time: 1970-01-01 00:00:00
Cache data hit count 4294967295
Slowest loop: 199.72ms; fastest: 0.12ms
I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0, resets 0
=== Storage ===
Free file entries: 10
SD card 0 detected, interface speed: 20.0MBytes/sec
SD card longest read time 3.8ms, write time 0.0ms, max retries 0
=== Move ===
DMs created 83, maxWait 0ms, bed compensation in use: none, comp offset 0.000
=== MainDDARing ===
Scheduled moves 0, completed moves 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== AuxDDARing ===
Scheduled moves 0, completed moves 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== Heat ===
Bed heaters = -1 -1 -1 -1, chamberHeaters = -1 -1 -1 -1
=== GCodes ===
Segments left: 0
Movement lock held by null
HTTP is idle in state(s) 0
Telnet is idle in state(s) 0
File is idle in state(s) 0
USB is ready with "m122" in state(s) 0
Aux is idle in state(s) 0
Trigger is idle in state(s) 0
Queue is idle in state(s) 0
LCD is idle in state(s) 0
Daemon is idle in state(s) 0
Autopause is idle in state(s) 0
Code queue is empty.
=== Network ===
Slowest loop: 199.96ms; fastest: 0.00ms
Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0), 0 sessions
HTTP sessions: 0 of 8- WiFi -
Network state is active
WiFi module is idle
Failed messages: pending 0, notready 0, noresp 0
WiFi firmware version 1.26
WiFi MAC address ec:fa:bc:25:34:5c
WiFi Vcc 3.39, reset reason Turned on by main processor
WiFi flash size 4194304, free heap 31248
Clock register 00002002
Socket states: 0 0 0 0 0 0 0 0
ok
- WiFi -
-
@Bill-Duet-3D you may way to update the firmware first.
grab these files and put it in a folder called firmware on the SD card
https://github.com/Duet3D/RepRapFirmware/releases/download/3.5.1/Duet2CombinedFirmware.bin
https://github.com/Duet3D/RepRapFirmware/releases/download/3.5.1/Duet2_SDiap32_WiFiEth.bin
https://github.com/Duet3D/RepRapFirmware/releases/download/3.5.1/DuetWiFiServer.bin
and extract this zip to the www folder
https://github.com/Duet3D/RepRapFirmware/releases/download/3.5.1/DuetWebControl-SD.zipthe run
M997andM997 S1via terminal to update everything
then try adding your wifi details again
if it still doesn't work, grab a new M122