Stealthchop & Speadcycle
-
Running an AWD setup on a large corexy. I am on RRF 3.5.
It is my understanding that under this software version, my steppers by default are full-time on speadcycle?
...Or are they still using stealthchop and switching over to spreadcycle at a given speed?
-
@br7408 said in Stealthchop & Speadcycle:
It is my understanding that under this software version, my steppers by default are full-time on speadcycle?
Correct. See D parameter of M569: to https://docs.duet3d.com/User_manual/Reference/Gcodes#m569-set-motor-driver-direction-enable-polarity-mode-and-step-pulse-timing
The default is spreadCycle for all drivers from RRF 3.4
Ian
