Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Simplyprint.io (unoffical) Duet Connector

    Scheduled Pinned Locked Moved
    Third-party software
    2
    2
    618
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • timschneiderundefined
      timschneider
      last edited by

      Hi, I came across Simplyprint.io and thought it would be nice to control our printers with Duet control via the interface. It is a cloud based remote / off-side print management tool.
      They do not offer a connector to duet at the moment, so I wrote a connector that allows easy monitoring and control of the printers. Maybe someone here is interested in it.
      You can find it on github and you can run it on a RPi.
      I know it is tempting to use the SBC for that, but you need python >= 3.8 to run it, so either bookworm or bulleseye - buster will not work.

      Some screenshots from my setup:

      db9118a1-42c2-4781-8114-c188fbacb57c-grafik.png
      d0b9e557-c400-4962-9f90-97da387e6be8-grafik.png

      1 Reply Last reply Reply Quote 5
      • timschneiderundefined timschneider referenced this topic
      • Theboz1419undefined
        Theboz1419
        last edited by

        Thank you, this looks promising

        1 Reply Last reply Reply Quote 0
        • First post
          Last post
        Unless otherwise noted, all forum content is licensed under CC-BY-SA