• Tags
  • Documentation
  • Order
  • Register
  • Login
Duet3D Logo Duet3D
  • Tags
  • Documentation
  • Order
  • Register
  • Login

"The last HTTP request has timed out" after upgrade to 1.20

Scheduled Pinned Locked Moved
Firmware installation
6
33
4.1k
Loading More Posts
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • undefined
    xnaron
    last edited by 1 Jul 2018, 21:42 7 Jan 2018, 20:23

    I upgraded my Duet WiFi to 1.20 from 1.18 following the instructions here. https://duet3d.com/wiki/Upgrading_to_DuetWiFiFirmware_1.19

    The upgrade went fine. The issue I am having now is that the web interface will give an http request timeout error after it's been sitting there for a while. It's happened during printing and when idle. If I hit the browser refresh it reconnects fine. I haven't seen this happen in 1.18. Is this a known issue? Nothing has changed with the wifi config on my end. I've attached the google photos link to the picture of the error below.

    thanks,
    Brendin

    https://photos.app.goo.gl/fZiPOSlPTQ9Smv1m2

    1 Reply Last reply Reply Quote 0
    • undefined
      dc42 administrators
      last edited by 7 Jan 2018, 21:47

      No, that's not a known issue. You might want to try DuetWiFiServer 1.20+1. I released that along with the 1.20.1RC, but it is compatible with firmware 1.20 as well.

      Duet WiFi hardware designer and firmware engineer
      Please do not ask me for Duet support via PM or email, use the forum
      http://www.escher3d.com, https://miscsolutions.wordpress.com

      1 Reply Last reply Reply Quote 0
      • undefined
        garyd9
        last edited by 7 Jan 2018, 22:13

        I have (and had) this same issue with 1.20.1 (RC2) and 1.20 (release) with one important difference: My Duet is a Duet Ethernet. I just assumed it was one of those quirks of the system (and it never impacted usability.)

        "I'm not saying that you are wrong - I'm just trying to fit it into my real world simulated experience."

        1 Reply Last reply Reply Quote 0
        • undefined
          dc42 administrators
          last edited by 7 Jan 2018, 22:21

          That's even more strange then, because the networking code for the Duet Ethernet didn't change much between 1.18 and 1.20. Where does that error message appear?

          Duet WiFi hardware designer and firmware engineer
          Please do not ask me for Duet support via PM or email, use the forum
          http://www.escher3d.com, https://miscsolutions.wordpress.com

          1 Reply Last reply Reply Quote 0
          • undefined
            garyd9
            last edited by 7 Jan 2018, 22:42

            I've never used 1.18. I started with 1.20 (release.) It usually appears as a red or pink box towards the bottom of the browser.

            "I'm not saying that you are wrong - I'm just trying to fit it into my real world simulated experience."

            1 Reply Last reply Reply Quote 0
            • undefined
              dc42 administrators
              last edited by 7 Jan 2018, 23:09

              You could try increasing the "Maximum number of AJAX retries" in the Settings General page of DWC.

              Duet WiFi hardware designer and firmware engineer
              Please do not ask me for Duet support via PM or email, use the forum
              http://www.escher3d.com, https://miscsolutions.wordpress.com

              1 Reply Last reply Reply Quote 0
              • undefined
                xnaron
                last edited by 8 Jan 2018, 01:58

                I installed 1.20.1RC2 firmware and wifi server and it still has the same issue. I have rebooted the wifi router and am trying it on a different computer to see if the issue persists. Will post an update soon.

                1 Reply Last reply Reply Quote 0
                • undefined
                  xnaron
                  last edited by 8 Jan 2018, 02:56

                  You can see a picture of the error I linked in my first post if you are curious. My Maximum number of AJAX retires is set to 1 in the Settings General page. Is that the default?

                  1 Reply Last reply Reply Quote 0
                  • undefined
                    xnaron
                    last edited by 1 Sept 2018, 02:14 8 Jan 2018, 04:05

                    I can reproduce the issue on a different computer.

                    1 Reply Last reply Reply Quote 0
                    • undefined
                      dc42 administrators
                      last edited by 8 Jan 2018, 07:36

                      Were you getting any AJAX error reports before the firmware upgrade? The error reporting changed in DWC 1.20 to give a more precise message.

                      Duet WiFi hardware designer and firmware engineer
                      Please do not ask me for Duet support via PM or email, use the forum
                      http://www.escher3d.com, https://miscsolutions.wordpress.com

                      1 Reply Last reply Reply Quote 0
                      • undefined
                        xnaron
                        last edited by 1 Aug 2018, 16:43 8 Jan 2018, 16:39

                        I wasn't getting any errors before. I had 15+ hour prints without any issues. I also have a Duet Ethernet and I will test against that on 1.20. Is there any deuggin I can turn on to see if I am losing wifi connection and reconnecting?

                        1 Reply Last reply Reply Quote 0
                        • undefined
                          dc42 administrators
                          last edited by 8 Jan 2018, 17:55

                          You can connect a PC via USB, then send M111 S1 P14 to enable wifi debug messages to be sent to USB.

                          Duet WiFi hardware designer and firmware engineer
                          Please do not ask me for Duet support via PM or email, use the forum
                          http://www.escher3d.com, https://miscsolutions.wordpress.com

                          1 Reply Last reply Reply Quote 0
                          • undefined
                            xnaron
                            last edited by 9 Jan 2018, 01:29

                            Here is what the log looks like. I removed the beginning of the log as it was a repetition of what you see at the start. The web interface gave the error around 18:20

                            [[language]]
                            18:19:59.297 : HTTP req, command words { GET /rr_status HTTP/1.1 }, parameters { type=1 }
                            18:19:59.575 : New conn on socket 0 for local port 80
                            18:19:59.575 : HTTP connection accepted
                            18:19:59.575 : Found responder
                            18:19:59.575 : Received 392 bytes
                            18:19:59.579 : Sending reply, file = no
                            18:19:59.579 : HTTP req, command words { GET /rr_status HTTP/1.1 }, parameters { type=2 }
                            18:19:59.861 : New conn on socket 0 for local port 80
                            18:19:59.861 : HTTP connection accepted
                            18:19:59.861 : Found responder
                            18:19:59.861 : Received 392 bytes
                            18:19:59.864 : Sending reply, file = no
                            18:19:59.864 : HTTP req, command words { GET /rr_status HTTP/1.1 }, parameters { type=1 }
                            18:20:00.068 : aux: M408 S0 R22
                            18:20:00.142 : New conn on socket 0 for local port 80
                            18:20:00.142 : HTTP connection accepted
                            18:20:00.142 : Found responder
                            18:20:00.142 : Received 392 bytes
                            18:20:00.145 : Sending reply, file = no
                            18:20:00.145 : HTTP req, command words { GET /rr_status HTTP/1.1 }, parameters { type=1 }
                            18:20:01.071 : aux: M408 S0 R22
                            18:20:01.104 : serial: M105
                            18:20:02.073 : aux: M408 S0 R22
                            18:20:03.078 : aux: M408 S0 R22
                            18:20:04.080 : aux: M408 S0 R22
                            18:20:04.165 : serial: M105
                            18:20:05.084 : aux: M408 S0 R22
                            18:20:06.086 : aux: M408 S0 R22
                            18:20:07.089 : aux: M408 S0 R22
                            18:20:07.229 : serial: M105
                            18:20:08.092 : aux: M408 S0 R22
                            18:20:08.707 : New conn on socket 0 for local port 80
                            18:20:08.707 : HTTP connection accepted
                            18:20:08.707 : Found responder
                            18:20:08.708 : New conn on socket 1 for local port 80
                            18:20:08.708 : HTTP connection accepted
                            18:20:08.708 : Found responder
                            18:20:08.708 : New conn on socket 2 for local port 80
                            18:20:08.708 : HTTP connection accepted
                            18:20:08.708 : Found responder
                            18:20:09.096 : aux: M408 S0 R22
                            18:20:10.099 : aux: M408 S0 R22
                            18:20:10.288 : serial: M105
                            18:20:11.101 : aux: M408 S0 R22
                            18:20:12.105 : aux: M408 S0 R22
                            18:20:13.108 : aux: M408 S0 R22
                            18:20:13.352 : serial: M105
                            18:20:14.110 : aux: M408 S0 R22
                            18:20:15.114 : aux: M408 S0 R22
                            18:20:16.117 : aux: M408 S0 R22
                            18:20:16.419 : serial: M105
                            18:20:17.120 : aux: M408 S0 R22
                            18:20:18.123 : aux: M408 S0 R22
                            18:20:19.126 : aux: M408 S0 R22
                            18:20:19.476 : serial: M105
                            18:20:20.130 : aux: M408 S0 R22
                            18:20:21.132 : aux: M408 S0 R22
                            18:20:22.135 : aux: M408 S0 R22
                            18:20:22.538 : serial: M105
                            18:20:23.137 : aux: M408 S0 R22
                            18:20:24.140 : aux: M408 S0 R22
                            18:20:25.145 : aux: M408 S0 R22
                            18:20:25.602 : serial: M105
                            18:20:26.147 : aux: M408 S0 R22
                            18:20:27.150 : aux: M408 S0 R22
                            18:20:28.153 : aux: M408 S0 R22
                            18:20:28.664 : serial: M105
                            18:20:29.157 : aux: M408 S0 R22
                            18:20:30.159 : aux: M408 S0 R22
                            18:20:31.163 : aux: M408 S0 R22
                            18:20:31.727 : serial: M105
                            18:20:32.167 : aux: M408 S0 R22
                            18:20:33.168 : aux: M408 S0 R22
                            18:20:34.172 : aux: M408 S0 R22
                            18:20:34.792 : serial: M105
                            18:20:35.176 : aux: M408 S0 R22
                            18:20:36.178 : aux: M408 S0 R22
                            18:20:37.182 : aux: M408 S0 R22
                            18:20:37.848 : serial: M105
                            18:20:38.185 : aux: M408 S0 R22
                            18:20:39.188 : aux: M408 S0 R22
                            18:20:40.191 : aux: M408 S0 R22
                            18:20:40.917 : serial: M105
                            18:20:41.194 : aux: M408 S0 R22
                            18:20:42.197 : aux: M408 S0 R22
                            18:20:43.200 : aux: M408 S0 R22
                            18:20:43.978 : serial: M105
                            18:20:44.203 : aux: M408 S0 R22
                            18:20:45.206 : aux: M408 S0 R22
                            18:20:46.209 : aux: M408 S0 R22
                            18:20:47.037 : serial: M105
                            18:20:47.213 : aux: M408 S0 R22
                            18:20:48.215 : aux: M408 S0 R22
                            18:20:49.217 : aux: M408 S0 R22
                            18:20:50.103 : serial: M105
                            18:20:50.221 : aux: M408 S0 R22
                            18:20:51.224 : aux: M408 S0 R22
                            18:20:52.227 : aux: M408 S0 R22
                            18:20:53.167 : serial: M105
                            18:20:53.231 : aux: M408 S0 R22
                            18:20:54.234 : aux: M408 S0 R22
                            18:20:55.237 : aux: M408 S0 R22
                            18:20:56.226 : serial: M105
                            18:20:56.239 : aux: M408 S0 R22
                            18:20:57.244 : aux: M408 S0 R22
                            18:20:58.247 : aux: M408 S0 R22
                            18:20:59.249 : aux: M408 S0 R22
                            18:20:59.291 : serial: M105
                            18:21:00.252 : aux: M408 S0 R22
                            18:21:01.255 : aux: M408 S0 R22
                            18:21:02.258 : aux: M408 S0 R22
                            18:21:02.355 : serial: M105
                            18:21:03.261 : aux: M408 S0 R22
                            18:21:04.265 : aux: M408 S0 R22
                            18:21:05.267 : aux: M408 S0 R22
                            18:21:05.418 : serial: M105
                            18:21:06.270 : aux: M408 S0 R22
                            18:21:07.273 : aux: M408 S0 R22
                            18:21:08.277 : aux: M408 S0 R22
                            18:21:08.478 : serial: M105
                            18:21:09.280 : aux: M408 S0 R22
                            18:21:10.282 : aux: M408 S0 R22
                            18:21:11.286 : aux: M408 S0 R22
                            18:21:11.537 : serial: M105
                            18:21:12.288 : aux: M408 S0 R22
                            18:21:13.292 : aux: M408 S0 R22
                            18:21:14.295 : aux: M408 S0 R22
                            18:21:14.604 : serial: M105
                            18:21:15.298 : aux: M408 S0 R22
                            18:21:16.301 : aux: M408 S0 R22
                            18:21:17.303 : aux: M408 S0 R22
                            18:21:17.667 : serial: M105
                            18:21:18.307 : aux: M408 S0 R22
                            18:21:19.311 : aux: M408 S0 R22
                            18:21:20.313 : aux: M408 S0 R22
                            18:21:20.729 : serial: M105
                            18:21:21.316 : aux: M408 S0 R22
                            18:21:22.319 : aux: M408 S0 R22
                            18:21:23.323 : aux: M408 S0 R22
                            18:21:23.790 : serial: M105
                            18:21:24.325 : aux: M408 S0 R22
                            18:21:25.329 : aux: M408 S0 R22
                            18:21:26.332 : aux: M408 S0 R22
                            18:21:26.851 : serial: M105
                            18:21:27.335 : aux: M408 S0 R22
                            18:21:28.337 : aux: M408 S0 R22
                            18:21:29.341 : aux: M408 S0 R22
                            18:21:29.912 : serial: M105
                            18:21:30.344 : aux: M408 S0 R22
                            18:21:31.347 : aux: M408 S0 R22
                            18:21:32.351 : aux: M408 S0 R22
                            18:21:32.974 : serial: M105
                            18:21:33.354 : aux: M408 S0 R22
                            18:21:34.357 : aux: M408 S0 R22
                            18:21:35.360 : aux: M408 S0 R22
                            18:21:36.036 : serial: M105
                            18:21:36.363 : aux: M408 S0 R22
                            18:21:37.366 : aux: M408 S0 R22
                            18:21:38.369 : aux: M408 S0 R22
                            18:21:39.103 : serial: M105
                            18:21:39.372 : aux: M408 S0 R22
                            18:21:40.375 : aux: M408 S0 R22
                            18:21:41.378 : aux: M408 S0 R22
                            18:21:42.164 : serial: M105
                            18:21:42.381 : aux: M408 S0 R22
                            18:21:43.384 : aux: M408 S0 R22
                            18:21:44.387 : aux: M408 S0 R22
                            18:21:45.229 : serial: M105
                            18:21:45.390 : aux: M408 S0 R22
                            18:21:46.394 : aux: M408 S0 R22
                            18:21:47.396 : aux: M408 S0 R22
                            18:21:48.286 : serial: M105
                            18:21:48.399 : aux: M408 S0 R22
                            18:21:49.403 : aux: M408 S0 R22
                            18:21:50.405 : aux: M408 S0 R22
                            18:21:51.354 : serial: M105
                            18:21:51.409 : aux: M408 S0 R22
                            18:21:52.411 : aux: M408 S0 R22
                            18:21:53.415 : aux: M408 S0 R22
                            18:21:54.412 : serial: M105
                            18:21:54.417 : aux: M408 S0 R22
                            18:21:55.422 : aux: M408 S0 R22
                            18:21:56.425 : aux: M408 S0 R22
                            18:21:57.427 : aux: M408 S0 R22
                            18:21:57.480 : serial: M105
                            18:21:58.430 : aux: M408 S0 R22
                            18:21:59.434 : aux: M408 S0 R22
                            18:22:00.436 : aux: M408 S0 R22
                            18:22:00.536 : serial: M105
                            18:22:01.439 : aux: M408 S0 R22
                            18:22:02.442 : aux: M408 S0 R22
                            18:22:03.446 : aux: M408 S0 R22
                            18:22:03.600 : serial: M105
                            18:22:04.448 : aux: M408 S0 R22
                            18:22:05.452 : aux: M408 S0 R22
                            18:22:06.455 : aux: M408 S0 R22
                            18:22:06.662 : serial: M105
                            18:22:07.458 : aux: M408 S0 R22
                            18:22:08.461 : aux: M408 S0 R22
                            18:22:09.464 : aux: M408 S0 R22
                            18:22:09.727 : serial: M105
                            18:22:10.468 : aux: M408 S0 R22
                            18:22:11.469 : aux: M408 S0 R22
                            18:22:12.473 : aux: M408 S0 R22
                            18:22:12.790 : serial: M105
                            18:22:13.476 : aux: M408 S0 R22
                            18:22:14.479 : aux: M408 S0 R22
                            18:22:15.483 : aux: M408 S0 R22
                            18:22:15.854 : serial: M105
                            18:22:16.486 : aux: M408 S0 R22
                            18:22:17.489 : aux: M408 S0 R22
                            18:22:18.492 : aux: M408 S0 R22
                            18:22:18.917 : serial: M105
                            18:22:19.494 : aux: M408 S0 R22
                            18:22:20.497 : aux: M408 S0 R22
                            18:22:21.500 : aux: M408 S0 R22
                            18:22:21.975 : serial: M105
                            18:22:22.504 : aux: M408 S0 R22
                            18:22:23.507 : aux: M408 S0 R22
                            18:22:24.510 : aux: M408 S0 R22
                            18:22:25.039 : serial: M105
                            18:22:25.514 : aux: M408 S0 R22
                            18:22:26.516 : aux: M408 S0 R22
                            18:22:27.519 : aux: M408 S0 R22
                            18:22:28.104 : serial: M105
                            18:22:28.522 : aux: M408 S0 R22
                            18:22:29.526 : aux: M408 S0 R22
                            18:22:30.529 : aux: M408 S0 R22
                            18:22:31.169 : serial: M105
                            18:22:31.531 : aux: M408 S0 R22
                            18:22:32.534 : aux: M408 S0 R22
                            18:22:33.538 : aux: M408 S0 R22
                            18:22:34.230 : serial: M105
                            18:22:34.541 : aux: M408 S0 R22
                            18:22:35.543 : aux: M408 S0 R22
                            18:22:36.547 : aux: M408 S0 R22
                            18:22:37.289 : serial: M105
                            18:22:37.550 : aux: M408 S0 R22
                            18:22:38.553 : aux: M408 S0 R22
                            18:22:39.556 : aux: M408 S0 R22
                            18:22:40.353 : serial: M105
                            18:22:40.560 : aux: M408 S0 R22
                            18:22:41.562 : aux: M408 S0 R22
                            18:22:42.565 : aux: M408 S0 R22
                            18:22:43.417 : serial: M105
                            18:22:43.568 : aux: M408 S0 R22
                            18:22:44.572 : aux: M408 S0 R22
                            18:22:45.575 : aux: M408 S0 R22
                            18:22:46.477 : serial: M105
                            18:22:46.577 : aux: M408 S0 R22
                            18:22:47.580 : aux: M408 S0 R22
                            18:22:48.583 : aux: M408 S0 R22
                            18:22:49.543 : serial: M105
                            18:22:49.587 : aux: M408 S0 R22
                            18:22:50.590 : aux: M408 S0 R22
                            18:22:51.594 : aux: M408 S0 R22
                            18:22:52.596 : aux: M408 S0 R22
                            18:22:52.602 : serial: M105
                            18:22:53.599 : aux: M408 S0 R22
                            18:22:54.603 : aux: M408 S0 R22
                            18:22:55.604 : aux: M408 S0 R22
                            18:22:55.662 : serial: M105
                            18:22:56.608 : aux: M408 S0 R22
                            18:22:57.611 : aux: M408 S0 R22
                            18:22:58.614 : aux: M408 S0 R22
                            18:22:58.725 : serial: M105
                            18:22:59.618 : aux: M408 S0 R22
                            18:23:00.621 : aux: M408 S0 R22
                            18:23:01.624 : aux: M408 S0 R22
                            18:23:01.789 : serial: M105
                            18:23:02.626 : aux: M408 S0 R22
                            18:23:03.629 : aux: M408 S0 R22
                            18:23:04.633 : aux: M408 S0 R22
                            18:23:04.855 : serial: M105
                            18:23:05.635 : aux: M408 S0 R22
                            18:23:06.639 : aux: M408 S0 R22
                            18:23:07.643 : aux: M408 S0 R22
                            18:23:07.919 : serial: M105
                            18:23:08.645 : aux: M408 S0 R22
                            18:23:09.648 : aux: M408 S0 R22
                            18:23:10.650 : aux: M408 S0 R22
                            18:23:10.979 : serial: M105
                            18:23:11.654 : aux: M408 S0 R22
                            18:23:12.658 : aux: M408 S0 R22
                            18:23:13.660 : aux: M408 S0 R22
                            18:23:14.038 : serial: M105
                            18:23:14.664 : aux: M408 S0 R22
                            18:23:15.667 : aux: M408 S0 R22
                            18:23:16.669 : aux: M408 S0 R22
                            18:23:17.098 : serial: M105
                            18:23:17.673 : aux: M408 S0 R22
                            18:23:18.676 : aux: M408 S0 R22
                            18:23:19.679 : aux: M408 S0 R22
                            18:23:20.165 : serial: M105
                            18:23:20.682 : aux: M408 S0 R22
                            18:23:21.685 : aux: M408 S0 R22
                            18:23:22.688 : aux: M408 S0 R22
                            18:23:23.228 : serial: M105
                            18:23:23.692 : aux: M408 S0 R22
                            18:23:24.694 : aux: M408 S0 R22
                            18:23:25.697 : aux: M408 S0 R22
                            18:23:26.287 : serial: M105
                            18:23:26.700 : aux: M408 S0 R22
                            18:23:27.703 : aux: M408 S0 R22
                            18:23:28.707 : aux: M408 S0 R22
                            18:23:29.355 : serial: M105
                            18:23:29.710 : aux: M408 S0 R22
                            18:23:30.713 : aux: M408 S0 R22
                            18:23:31.717 : aux: M408 S0 R22
                            18:23:32.415 : serial: M105
                            18:23:32.719 : aux: M408 S0 R22
                            18:23:33.722 : aux: M408 S0 R22
                            18:23:34.725 : aux: M408 S0 R22
                            18:23:35.474 : serial: M105
                            18:23:35.728 : aux: M408 S0 R22
                            18:23:36.731 : aux: M408 S0 R22
                            18:23:37.734 : aux: M408 S0 R22
                            18:23:38.541 : serial: M105
                            18:23:38.738 : aux: M408 S0 R22
                            18:23:39.741 : aux: M408 S0 R22
                            18:23:40.744 : aux: M408 S0 R22
                            18:23:41.598 : serial: M105
                            18:23:41.746 : aux: M408 S0 R22
                            18:23:42.749 : aux: M408 S0 R22
                            18:23:43.752 : aux: M408 S0 R22
                            18:23:44.667 : serial: M105
                            18:23:44.756 : aux: M408 S0 R22
                            18:23:45.759 : aux: M408 S0 R22
                            18:23:46.762 : aux: M408 S0 R22
                            18:23:47.728 : serial: M105
                            18:23:47.764 : aux: M408 S0 R22
                            18:23:48.769 : aux: M408 S0 R22
                            18:23:49.772 : aux: M408 S0 R22
                            18:23:50.774 : aux: M408 S0 R22
                            18:23:50.790 : serial: M105
                            18:23:51.777 : aux: M408 S0 R22
                            18:23:52.781 : aux: M408 S0 R22
                            18:23:53.784 : aux: M408 S0 R22
                            18:23:53.852 : serial: M105
                            18:23:54.787 : aux: M408 S0 R22
                            18:23:55.789 : aux: M408 S0 R22
                            18:23:56.793 : aux: M408 S0 R22
                            18:23:56.912 : serial: M105
                            18:23:57.797 : aux: M408 S0 R22
                            18:23:58.799 : aux: M408 S0 R22
                            18:23:59.802 : aux: M408 S0 R22
                            18:23:59.974 : serial: M105
                            18:24:00.806 : aux: M408 S0 R22
                            18:24:01.808 : aux: M408 S0 R22
                            18:24:02.811 : aux: M408 S0 R22
                            18:24:03.040 : serial: M105
                            18:24:03.814 : aux: M408 S0 R22
                            18:24:04.818 : aux: M408 S0 R22
                            18:24:05.820 : aux: M408 S0 R22
                            18:24:06.097 : serial: M105
                            18:24:06.824 : aux: M408 S0 R22
                            18:24:06.905 : Class Network spinning
                            18:24:06.905 : Class GCodes spinning
                            18:24:06.905 : Class Move spinning
                            18:24:06.905 : Class Heat spinning
                            18:24:06.905 : Class Scanner spinning
                            18:24:06.905 : Class PrintMonitor spinning
                            18:24:06.906 : Class Platform spinning
                            1 Reply Last reply Reply Quote 0
                            • undefined
                              dc42 administrators
                              last edited by 9 Jan 2018, 07:48

                              You enabled all debugging instead of just WiFi, or else you used Repetier Host. Please enable just WiFi debugging, and use either Pronterface or a terminal emulator.

                              Duet WiFi hardware designer and firmware engineer
                              Please do not ask me for Duet support via PM or email, use the forum
                              http://www.escher3d.com, https://miscsolutions.wordpress.com

                              1 Reply Last reply Reply Quote 0
                              • undefined
                                xnaron
                                last edited by 1 Sept 2018, 15:07 9 Jan 2018, 15:07

                                I was using repetier host. I just tried using a terminal and I am not getting anything in the log when the event occurs with just wifi debug enabled. However I setup a constant ping to the duet wifi and when the event occurs the ping time goes as high as 9 seconds to ping. Event starts at seq 763 below. Should I turn on more logging for any other modules?

                                [[language]]
                                64 bytes from 192.168.0.15: icmp_seq=755 ttl=255 time=1.43 ms
                                64 bytes from 192.168.0.15: icmp_seq=756 ttl=255 time=1.50 ms
                                64 bytes from 192.168.0.15: icmp_seq=757 ttl=255 time=1.20 ms
                                64 bytes from 192.168.0.15: icmp_seq=758 ttl=255 time=3.43 ms
                                64 bytes from 192.168.0.15: icmp_seq=759 ttl=255 time=1.17 ms
                                64 bytes from 192.168.0.15: icmp_seq=760 ttl=255 time=1.81 ms
                                64 bytes from 192.168.0.15: icmp_seq=761 ttl=255 time=1.24 ms
                                64 bytes from 192.168.0.15: icmp_seq=762 ttl=255 time=1.13 ms
                                64 bytes from 192.168.0.15: icmp_seq=763 ttl=255 time=9117 ms
                                64 bytes from 192.168.0.15: icmp_seq=764 ttl=255 time=8110 ms
                                64 bytes from 192.168.0.15: icmp_seq=766 ttl=255 time=7526 ms
                                64 bytes from 192.168.0.15: icmp_seq=768 ttl=255 time=7155 ms
                                64 bytes from 192.168.0.15: icmp_seq=769 ttl=255 time=6148 ms
                                64 bytes from 192.168.0.15: icmp_seq=770 ttl=255 time=5337 ms
                                64 bytes from 192.168.0.15: icmp_seq=771 ttl=255 time=4533 ms
                                64 bytes from 192.168.0.15: icmp_seq=772 ttl=255 time=3726 ms
                                64 bytes from 192.168.0.15: icmp_seq=773 ttl=255 time=4361 ms
                                64 bytes from 192.168.0.15: icmp_seq=774 ttl=255 time=4999 ms
                                64 bytes from 192.168.0.15: icmp_seq=775 ttl=255 time=6048 ms
                                64 bytes from 192.168.0.15: icmp_seq=776 ttl=255 time=5413 ms
                                64 bytes from 192.168.0.15: icmp_seq=777 ttl=255 time=4517 ms
                                64 bytes from 192.168.0.15: icmp_seq=778 ttl=255 time=3516 ms
                                64 bytes from 192.168.0.15: icmp_seq=779 ttl=255 time=2547 ms
                                64 bytes from 192.168.0.15: icmp_seq=780 ttl=255 time=1705 ms
                                64 bytes from 192.168.0.15: icmp_seq=781 ttl=255 time=697 ms
                                64 bytes from 192.168.0.15: icmp_seq=782 ttl=255 time=3.92 ms
                                64 bytes from 192.168.0.15: icmp_seq=783 ttl=255 time=1.50 ms
                                64 bytes from 192.168.0.15: icmp_seq=784 ttl=255 time=1.17 ms
                                1 Reply Last reply Reply Quote 0
                                • undefined
                                  dc42 administrators
                                  last edited by 9 Jan 2018, 16:51

                                  Ping responses are handled by the wifi module, so it looks like the problem was either in the wifi module or in the communication between the wifi module and your router

                                  Did you remember to send M111 S1 P14 to enable wifi debugging?

                                  Duet WiFi hardware designer and firmware engineer
                                  Please do not ask me for Duet support via PM or email, use the forum
                                  http://www.escher3d.com, https://miscsolutions.wordpress.com

                                  1 Reply Last reply Reply Quote 0
                                  • undefined
                                    xnaron
                                    last edited by 9 Jan 2018, 16:58

                                    Yes I did send the command to enable wifi deugging and did receive the message in the terminal confirming it was enabled. I have a different WiFi router I will try using and see if I can reproduce the same ping results on it. This should help narrow down whether it is in the router or the duet,

                                    1 Reply Last reply Reply Quote 0
                                    • Captain_squndefined
                                      Captain_sq
                                      last edited by 11 Jan 2018, 08:05

                                      I can second xnarons first post in this thread issue on my Duet WiFi. Upgradde from 1.19 were a breeze. My 1.19 also dropped connection to the wifi module from time to time but with another error message. I have increased the AJAX retries from 1 to 5 but need to check more tonight if it had any impact.

                                      Custom made Kossel Mini - Duet WiFi / Modded Tronxy X5S - Duet WiFi / Prusa i3 MKIII


                                      Embedded systems designer, RC Pilot, maker and Gadget-o-holic

                                      1 Reply Last reply Reply Quote 0
                                      • undefined
                                        pao_wikhan
                                        last edited by 11 Jan 2018, 13:36

                                        im also having an issue with HTTP requests on DWC
                                        wifi server appears to be okay.
                                        its getting too frequent now though, the board is printing calibrations.

                                        [[language]]
                                        The last HTTP request has timed out. Please make sure the connection between your device and the board is not interrupted.

                                        Firmware Name: RepRapFirmware for Duet WiFi
                                        Firmware Electronics: Duet WiFi 1.0
                                        Firmware Version: 1.20.1RC2 (2018-01-01)
                                        WiFi Server Version: 1.20+1
                                        Web Interface Version: 1.20

                                        1 Reply Last reply Reply Quote 0
                                        • undefined
                                          dc42 administrators
                                          last edited by 11 Jan 2018, 22:50

                                          Anyone getting http timeout errors using DuetWiFiServer 1.20+1, please try reverting to version 1.20. it's compatible with 1.20.1RC firmware.

                                          Duet WiFi hardware designer and firmware engineer
                                          Please do not ask me for Duet support via PM or email, use the forum
                                          http://www.escher3d.com, https://miscsolutions.wordpress.com

                                          1 Reply Last reply Reply Quote 0
                                          5 out of 33
                                          • First post
                                            5/33
                                            Last post
                                          Unless otherwise noted, all forum content is licensed under CC-BY-SA