Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Constant disconnects from DWC

    Scheduled Pinned Locked Moved
    Firmware installation
    3
    4
    719
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Rommieundefined
      Rommie
      last edited by

      I have upgraded all firmware to the newest yesterday, I am however now experiencing constant disconnects from the DWC, I have to then either close and reopen chrome to get it too connect again, or stop network on panel due direct and restart it with the m552 s0 and s1 respectively.

      not sure what's causing the issues

      1 Reply Last reply Reply Quote 0
      • dc42undefined
        dc42 administrators
        last edited by

        Do you mean latest stable firmware or latest edge firmware?

        Duet WiFi hardware designer and firmware engineer
        Please do not ask me for Duet support via PM or email, use the forum
        http://www.escher3d.com, https://miscsolutions.wordpress.com

        1 Reply Last reply Reply Quote 0
        • hackerundefined
          hacker
          last edited by

          Hey David, not sure what Rommie means, but I have similar experience with the latest stable.

          Also when the thing doesn't work, it responds to pings and immediately closes telnet connections, so I have to hook up to USB to restart network.

          1 Reply Last reply Reply Quote 0
          • Rommieundefined
            Rommie
            last edited by

            I'm on 1.20.1rc2 on firmware, 1.20+1 for wifi server and, 1.20 rc3 on dwc version. I have set macros up now so I can just use the panel due to reset the wifi turning off then on, I have been speaking to doug and he said to try rolling back to 1.20 on wifi server and try that. Will let ya know how it goes..

            There is also another chap on our discord channel that has had the same issues after upgrading his firmware from 1.19 to the 1.20+1 too

            1 Reply Last reply Reply Quote 0
            • First post
              Last post
            Unless otherwise noted, all forum content is licensed under CC-BY-SA