• Tags
  • Documentation
  • Order
  • Register
  • Login
Duet3D Logo Duet3D
  • Tags
  • Documentation
  • Order
  • Register
  • Login

Fine tuning Z

Scheduled Pinned Locked Moved
Tuning and tweaking
2
2
406
Loading More Posts
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • undefined
    ronnien58
    last edited by 11 Feb 2018, 17:55

    I have set my z offset at .7 as reported by the M114 command after calibrating z home. But when i went to print i had to raise the nozzle using baby steps up .5. Do i need to add or subtract from my z zero that i set in the config. file to print correctly the next time?

    1 Reply Last reply Reply Quote 0
    • undefined
      stephenc
      last edited by 11 Feb 2018, 18:44

      I believe it should be subtract to increase gap between nozzle and bed

      and add to decrease gap between nozzle and bed

      Stephen
      https://github.com/stephenci/ZideX

      1 Reply Last reply Reply Quote 0
      2 out of 2
      • First post
        2/2
        Last post
      Unless otherwise noted, all forum content is licensed under CC-BY-SA