At job finish - - > email
-
Hi,
One interesting function, is when the print finish, Duet send an email… Or when an error occurs
-
And more….
Maybe, send orders, gcodes for email..
Pe:
- Calibrate
- Motors off
- heaters off /on
....
Gcodes, that Duet console, can execute
-
If you put command M0 at the end of your slicer end gcode then it will run macro sys/stop.g when the print finishes. if that macro is not found, the firmware turns off the heaters and the motors.
There is not yet a facility to send an email when a print finishes.
