New Day New Errors. M30: Filename expected

Nappen

Everytime i try to change temps or speed in the machine i get a error messange saying.

the console right now looks like this
12:06:11M220 S85
Error: M30: Filename expected
Finished printing file T0-20x20x20.gcode, print time was 0h 24m
12:03:42G10 P1 S220
Error: M30: Filename expected
Finished printing file T0-20x20x20.gcode, print time was 0h 24m
12:02:35G10 P1 R170
Error: M30: Filename expected
Finished printing file T0-20x20x20.gcode, print time was 0h 24m
12:01:50G10 P1 S215
Error: M30: Filename expected
Finished printing file T0-20x20x20.gcode, print time was 0h 24m
12:01:44G10 P0 S215
Error: M30: Filename expected
Finished printing file T0-20x20x20.gcode, print time was 0h 24m
12:01:07Error: M30: Filename expected
Finished printing file T0-20x20x20.gcode, print time was 0h 24m
11:42:42Error: M30: Filename expected
Finished printing file T0-20x20x20.gcode, print time was 0h 24m
11:42:40Error: M30: Filename expected
Finished printing file T0-20x20x20.gcode, print time was 0h 24m
11:28:54Error: M30: Filename expected
Finished printing file T0-20x20x20.gcode, print time was 0h 24m
11:26:12T1
Error: M30: Filename expected
Finished printing file T0-20x20x20.gcode, print time was 0h 24m
11:25:56T0
Error: M30: Filename expected
Finished printing file T0-20x20x20.gcode, print time was 0h 24m
11:25:16G10 P0 S210
Error: M30: Filename expected
Finished printing file T0-20x20x20.gcode, print time was 0h 24m
11:25:08T1
Error: M30: Filename expected
Finished printing file T0-20x20x20.gcode, print time was 0h 24m
11:24:52Error: M30: Filename expected
Finished printing file T0-20x20x20.gcode, print time was 0h 24m

and the weird part is i printed 3 files after the T0-20x20x20.gcode file. what going on?

Phaedrux

Can you post the gcode for that file?

It would seem like there are M30 commands in it somehow.

Nappen

i have m30 in the end of all my gcode files. are it not supported in reprap firmware as a quit program?

tjb1

M30 is used to delete a file on the SD card - https://duet3d.dozuki.com/Wiki/Gcode#Section_M30_Delete_a_file_on_the_SD_card

Nappen

oh that explains alot i´ll remove it hehe

dc42

Perhaps you meant to use M0 instead?