Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    DuetRFF Cura plugin - not working/recognizing in cura?

    Scheduled Pinned Locked Moved
    General Discussion
    3
    23
    3.2k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • magicmarcundefined
      magicmarc
      last edited by

      i entered the ip address of the duet on my local wifi network: 172.16.31.76, i also tried \172.16.31.76 still the 301 protocol error.
      the cura.log is too large to paste here, i got an 'exceed limit' error, as well as it froze my chrome for a bit…
      ill copy and past the last part of the cura.log that has the error in the next reply.

      1 Reply Last reply Reply Quote 0
      • magicmarcundefined
        magicmarc
        last edited by

        so i renamed the cura.log so i can get a fresh , smaller one: here is the log, at the bottom section is the 301 error (while i attempted to 'upload file to duetrrf'
        –------------------------

        2018-03-20 08:19:12,806 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin FileLogger
        2018-03-20 08:19:12,860 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin FirmwareUpdateChecker
        2018-03-20 08:19:12,866 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin GCodeProfileReader
        2018-03-20 08:19:12,883 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin GCodeReader
        2018-03-20 08:19:12,894 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin GCodeWriter
        2018-03-20 08:19:12,903 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin ImageReader
        2018-03-20 08:19:12,910 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin LegacyProfileReader
        2018-03-20 08:19:12,919 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin LocalContainerProvider
        2018-03-20 08:19:12,929 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin LocalFileOutputDevice
        2018-03-20 08:19:12,937 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin MachineSettingsAction
        2018-03-20 08:19:12,946 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin MonitorStage
        2018-03-20 08:19:12,961 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin PerObjectSettingsTool
        2018-03-20 08:19:12,971 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin PluginBrowser
        2018-03-20 08:19:12,981 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin PostProcessingPlugin
        2018-03-20 08:19:12,988 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin PrepareStage
        2018-03-20 08:19:13,000 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin RemovableDriveOutputDevice
        2018-03-20 08:19:13,020 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin SimulationView
        2018-03-20 08:19:13,032 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin SliceInfoPlugin
        2018-03-20 08:19:13,040 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin SolidView
        2018-03-20 08:19:13,049 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin CameraTool
        2018-03-20 08:19:13,059 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin MirrorTool
        2018-03-20 08:19:13,071 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin RotateTool
        2018-03-20 08:19:13,087 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin ScaleTool
        2018-03-20 08:19:13,098 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin SelectionTool
        2018-03-20 08:19:13,108 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin TranslateTool
        2018-03-20 08:19:13,123 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin UltimakerMachineActions
        2018-03-20 08:19:13,177 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin UM3NetworkPrinting
        2018-03-20 08:19:13,188 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin UpdateChecker
        2018-03-20 08:19:13,190 - INFO - [(14864)-Thread-3] UpdateChecker.UpdateCheckerJob.run [34]: Checking for new version of cura
        2018-03-20 08:19:13,226 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin USBPrinting
        2018-03-20 08:19:13,234 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin UserAgreementPlugin
        2018-03-20 08:19:13,249 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin VersionUpgrade21to22
        2018-03-20 08:19:13,257 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin VersionUpgrade22to24
        2018-03-20 08:19:13,266 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin VersionUpgrade25to26
        2018-03-20 08:19:13,275 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin VersionUpgrade26to27
        2018-03-20 08:19:13,286 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin VersionUpgrade27to30
        2018-03-20 08:19:13,298 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin VersionUpgrade30to31
        2018-03-20 08:19:13,306 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin SimpleView
        2018-03-20 08:19:13,321 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin X3DReader
        2018-03-20 08:19:13,337 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin XmlMaterialProfile
        2018-03-20 08:19:13,350 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin XRayView
        2018-03-20 08:19:13,365 - ERROR - [(11228)-MainThread] UM.Qt.QtApplication.getTheme [325]: The theme cannot be accessed before the engine is initialised
        2018-03-20 08:19:13,367 - ERROR - [(11228)-MainThread] UM.Qt.QtApplication.getTheme [325]: The theme cannot be accessed before the engine is initialised
        2018-03-20 08:19:13,368 - ERROR - [(11228)-MainThread] UM.Qt.QtApplication.getTheme [325]: The theme cannot be accessed before the engine is initialised
        2018-03-20 08:19:13,369 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin Cura-DuetRRFPlugin-master
        2018-03-20 08:19:13,380 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin OrientationPlugin
        2018-03-20 08:19:13,389 - ERROR - [(11228)-MainThread] UM.Qt.QtApplication.getTheme [325]: The theme cannot be accessed before the engine is initialised
        2018-03-20 08:19:13,393 - INFO - [(11228)-MainThread] UM.VersionUpgradeManager.upgrade [113]: Looking for old configuration files to upgrade.
        2018-03-20 08:19:13,393 - DEBUG - [(15140)-Thread-9] USBPrinting.USBPrinterOutputDevice._connect [340]: Attempting to connect to COM5
        2018-03-20 08:19:13,672 - DEBUG - [(11228)-MainThread] UM.Backend.Backend._logSocketState [173]: Socket state changed to Listening
        2018-03-20 08:19:13,681 - INFO - [(11228)-MainThread] UM.Backend.Backend.startEngine [74]: Started engine process: C:\Program Files\Ultimaker Cura 3.2\CuraEngine.exe
        2018-03-20 08:19:13,685 - DEBUG - [(11228)-MainThread] UM.Backend.Backend._backendLog [90]: [Backend] Calling engine with: ['C:\Program Files\Ultimaker Cura 3.2\CuraEngine.exe', 'connect', '127.0.0.1:49674', '-j', 'C:\Program Files\Ultimaker Cura 3.2\resources\definitions\fdmprinter.def.json', '']
        2018-03-20 08:19:13,690 - WARNING - [(11228)-MainThread] UM.OutputDevice.OutputDeviceManager.removeOutputDevice [126]: Could not find output device with id COM5 to remove
        2018-03-20 08:19:13,761 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend]
        2018-03-20 08:19:13,763 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend] Cura_SteamEngine version DEV
        2018-03-20 08:19:13,764 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend] Copyright (C) 2017 Ultimaker
        2018-03-20 08:19:13,768 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend]
        2018-03-20 08:19:13,769 - DEBUG - [(11228)-MainThread] UM.Backend.Backend._logSocketState [177]: Socket state changed to Connected
        2018-03-20 08:19:13,771 - DEBUG - [(11228)-MainThread] UM.Backend.Backend._onSocketStateChanged [167]: Backend connected on port 49674
        2018-03-20 08:19:13,771 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend] This program is free software: you can redistribute it and/or modify
        2018-03-20 08:19:13,773 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend] it under the terms of the GNU Affero General Public License as published by
        2018-03-20 08:19:13,776 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend] the Free Software Foundation, either version 3 of the License, or
        2018-03-20 08:19:13,777 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend] (at your option) any later version.
        2018-03-20 08:19:13,779 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend]
        2018-03-20 08:19:13,780 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend] This program is distributed in the hope that it will be useful,
        2018-03-20 08:19:13,781 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend] but WITHOUT ANY WARRANTY; without even the implied warranty of
        2018-03-20 08:19:13,783 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend] MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
        2018-03-20 08:19:13,784 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend] GNU Affero General Public License for more details.
        2018-03-20 08:19:13,785 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend]
        2018-03-20 08:19:13,786 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend] You should have received a copy of the GNU Affero General Public License
        2018-03-20 08:19:13,787 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend] along with this program. If not, see <http://www.gnu.org/licenses/>.
        2018-03-20 08:19:15,189 - INFO - [(15140)-Thread-9] USBPrinting.USBPrinterOutputDevice._connect [348]: Could not establish connection on COM5: 'Timeout'. Device is not arduino based.
        2018-03-20 08:19:15,189 - DEBUG - [(15140)-Thread-9] USBPrinting.USBPrinterOutputDevice._connect [356]: Attempting to connect to printer with serial COM5 on baud rate 115200
        2018-03-20 08:19:15,399 - WARNING - [(11228)-MainThread] UM.Preferences.getValue [81]: Tried to get the value of non-existing setting view/filter_current_build_plate.
        2018-03-20 08:19:15,401 - DEBUG - [(11228)-MainThread] cura.Scene.CuraSceneController.setActiveBuildPlate [101]: Select build plate: 0
        2018-03-20 08:19:15,404 - DEBUG - [(11228)-MainThread] UM.Controller.setActiveStage [155]: Setting active stage to PrepareStage
        2018-03-20 08:19:15,406 - DEBUG - [(11228)-MainThread] UM.Controller.setActiveView [92]: Setting active view to SolidView
        2018-03-20 08:19:15,419 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container ARTEMIS
        2018-03-20 08:19:15,422 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container ARTEMIS_user
        2018-03-20 08:19:15,426 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_se300_pla_defaut
        2018-03-20 08:19:15,430 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container normal
        2018-03-20 08:19:15,432 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container ARTEMIS_settings
        2018-03-20 08:19:15,434 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom
        2018-03-20 08:19:15,500 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_4 #2
        2018-03-20 08:19:15,503 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_4 #2_user
        2018-03-20 08:19:15,505 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container polywood_pla
        2018-03-20 08:19:15,506 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_4 #2_settings
        2018-03-20 08:19:15,509 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_4
        2018-03-20 08:19:15,511 - INFO - [(11228)-MainThread] cura.Settings.GlobalStack.addExtruder [73]: Extruder[custom_extruder_4 #2] added to [ARTEMIS] at position [3]
        2018-03-20 08:19:15,513 - WARNING - [(11228)-MainThread] UM.Settings.ContainerStack.addMetaDataEntry [166]: Meta data with key machine was already added.
        2018-03-20 08:19:15,514 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_7 #2
        2018-03-20 08:19:15,516 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_7 #2_user
        2018-03-20 08:19:15,518 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_7 #2_settings
        2018-03-20 08:19:15,520 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_7
        2018-03-20 08:19:15,523 - INFO - [(11228)-MainThread] cura.Settings.GlobalStack.addExtruder [73]: Extruder[custom_extruder_7 #2] added to [ARTEMIS] at position [6]
        2018-03-20 08:19:15,524 - WARNING - [(11228)-MainThread] UM.Settings.ContainerStack.addMetaDataEntry [166]: Meta data with key machine was already added.
        2018-03-20 08:19:15,525 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_3 #2
        2018-03-20 08:19:15,528 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_3 #2_user
        2018-03-20 08:19:15,530 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_3 #2_settings
        2018-03-20 08:19:15,533 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_3
        2018-03-20 08:19:15,539 - INFO - [(11228)-MainThread] cura.Settings.GlobalStack.addExtruder [73]: Extruder[custom_extruder_3 #2] added to [ARTEMIS] at position [2]
        2018-03-20 08:19:15,542 - WARNING - [(11228)-MainThread] UM.Settings.ContainerStack.addMetaDataEntry [166]: Meta data with key machine was already added.
        2018-03-20 08:19:15,544 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_8 #2
        2018-03-20 08:19:15,546 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_8 #2_user
        2018-03-20 08:19:15,548 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_8 #2_settings
        2018-03-20 08:19:15,550 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_8
        2018-03-20 08:19:15,552 - INFO - [(11228)-MainThread] cura.Settings.GlobalStack.addExtruder [73]: Extruder[custom_extruder_8 #2] added to [ARTEMIS] at position [7]
        2018-03-20 08:19:15,553 - WARNING - [(11228)-MainThread] UM.Settings.ContainerStack.addMetaDataEntry [166]: Meta data with key machine was already added.
        2018-03-20 08:19:15,555 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_6 #2
        2018-03-20 08:19:15,558 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_6 #2_user
        2018-03-20 08:19:15,560 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_6 #2_settings
        2018-03-20 08:19:15,562 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_6
        2018-03-20 08:19:15,565 - INFO - [(11228)-MainThread] cura.Settings.GlobalStack.addExtruder [73]: Extruder[custom_extruder_6 #2] added to [ARTEMIS] at position [5]
        2018-03-20 08:19:15,566 - WARNING - [(11228)-MainThread] UM.Settings.ContainerStack.addMetaDataEntry [166]: Meta data with key machine was already added.
        2018-03-20 08:19:15,567 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_2 #2
        2018-03-20 08:19:15,569 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_2 #2_user
        2018-03-20 08:19:15,571 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_2 #2_settings
        2018-03-20 08:19:15,573 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_2
        2018-03-20 08:19:15,576 - INFO - [(11228)-MainThread] cura.Settings.GlobalStack.addExtruder [73]: Extruder[custom_extruder_2 #2] added to [ARTEMIS] at position [1]
        2018-03-20 08:19:15,577 - WARNING - [(11228)-MainThread] UM.Settings.ContainerStack.addMetaDataEntry [166]: Meta data with key machine was already added.
        2018-03-20 08:19:15,579 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_5 #2
        2018-03-20 08:19:15,581 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_5 #2_user
        2018-03-20 08:19:15,583 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_5 #2_settings
        2018-03-20 08:19:15,585 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_5
        2018-03-20 08:19:15,588 - INFO - [(11228)-MainThread] cura.Settings.GlobalStack.addExtruder [73]: Extruder[custom_extruder_5 #2] added to [ARTEMIS] at position [4]
        2018-03-20 08:19:15,589 - WARNING - [(11228)-MainThread] UM.Settings.ContainerStack.addMetaDataEntry [166]: Meta data with key machine was already added.
        2018-03-20 08:19:15,591 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_1 #2
        2018-03-20 08:19:15,594 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_1 #2_user
        2018-03-20 08:19:15,596 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_1_se300_pla_defaut
        2018-03-20 08:19:15,599 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container generic_pla_175
        2018-03-20 08:19:15,603 - DEBUG - [(11228)-MainThread] XmlMaterialProfile.XmlMaterialProfile.deserialize [544]: Found definition for machine ID imade3d_jellybox
        2018-03-20 08:19:15,612 - DEBUG - [(11228)-MainThread] XmlMaterialProfile.XmlMaterialProfile.deserialize [544]: Found definition for machine ID cartesio
        2018-03-20 08:19:15,621 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_1 #2_settings
        2018-03-20 08:19:15,623 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_1
        2018-03-20 08:19:15,626 - INFO - [(11228)-MainThread] cura.Settings.GlobalStack.addExtruder [73]: Extruder[custom_extruder_1 #2] added to [ARTEMIS] at position [0]
        2018-03-20 08:19:15,627 - WARNING - [(11228)-MainThread] UM.Settings.ContainerStack.addMetaDataEntry [166]: Meta data with key machine was already added.
        2018-03-20 08:19:15,629 - WARNING - [(11228)-MainThread] cura.Settings.GlobalStack.addExtruder [69]: Extruder [custom_extruder_4 #2] has already been added to this stack [ARTEMIS]
        2018-03-20 08:19:15,630 - WARNING - [(11228)-MainThread] UM.Settings.ContainerStack.addMetaDataEntry [166]: Meta data with key machine was already added.
        2018-03-20 08:19:15,631 - WARNING - [(11228)-MainThread] cura.Settings.ExtruderManager.registerExtruder [223]: Extruder [custom_extruder_4 #2] has already been registered on machine [ARTEMIS], not doing anything
        2018-03-20 08:19:15,632 - WARNING - [(11228)-MainThread] cura.Settings.GlobalStack.addExtruder [69]: Extruder [custom_extruder_7 #2] has already been added to this stack [ARTEMIS]
        2018-03-20 08:19:15,633 - WARNING - [(11228)-MainThread] UM.Settings.ContainerStack.addMetaDataEntry [166]: Meta data with key machine was already added.
        2018-03-20 08:19:15,634 - WARNING - [(11228)-MainThread] cura.Settings.ExtruderManager.registerExtruder [223]: Extruder [custom_extruder_7 #2] has already been registered on machine [ARTEMIS], not doing anything
        2018-03-20 08:19:15,635 - WARNING - [(11228)-MainThread] cura.Settings.GlobalStack.addExtruder [69]: Extruder [custom_extruder_3 #2] has already been added to this stack [ARTEMIS]
        2018-03-20 08:19:15,636 - WARNING - [(11228)-MainThread] UM.Settings.ContainerStack.addMetaDataEntry [166]: Meta data with key machine was already added.
        2018-03-20 08:19:15,637 - WARNING - [(11228)-MainThread] cura.Settings.ExtruderManager.registerExtruder [223]: Extruder [custom_extruder_3 #2] has already been registered on machine [ARTEMIS], not doing anything
        2018-03-20 08:19:15,639 - WARNING - [(11228)-MainThread] cura.Settings.GlobalStack.addExtruder [69]: Extruder [custom_extruder_8 #2] has already been added to this stack [ARTEMIS]
        2018-03-20 08:19:15,640 - WARNING - [(11228)-MainThread] UM.Settings.ContainerStack.addMetaDataEntry [166]: Meta data with key machine was already added.
        2018-03-20 08:19:15,641 - WARNING - [(11228)-MainThread] cura.Settings.ExtruderManager.registerExtruder [223]: Extruder [custom_extruder_8 #2] has already been registered on machine [ARTEMIS], not doing anything
        2018-03-20 08:19:15,642 - WARNING - [(11228)-MainThread] cura.Settings.GlobalStack.addExtruder [69]: Extruder [custom_extruder_6 #2] has already been added to this stack [ARTEMIS]
        2018-03-20 08:19:15,643 - WARNING - [(11228)-MainThread] UM.Settings.ContainerStack.addMetaDataEntry [166]: Meta data with key machine was already added.
        2018-03-20 08:19:15,644 - WARNING - [(11228)-MainThread] cura.Settings.ExtruderManager.registerExtruder [223]: Extruder [custom_extruder_6 #2] has already been registered on machine [ARTEMIS], not doing anything
        2018-03-20 08:19:15,645 - WARNING - [(11228)-MainThread] cura.Settings.GlobalStack.addExtruder [69]: Extruder [custom_extruder_2 #2] has already been added to this stack [ARTEMIS]
        2018-03-20 08:19:15,646 - WARNING - [(11228)-MainThread] UM.Settings.ContainerStack.addMetaDataEntry [166]: Meta data with key machine was already added.
        2018-03-20 08:19:15,647 - WARNING - [(11228)-MainThread] cura.Settings.ExtruderManager.registerExtruder [223]: Extruder [custom_extruder_2 #2] has already been registered on machine [ARTEMIS], not doing anything
        2018-03-20 08:19:15,648 - WARNING - [(11228)-MainThread] cura.Settings.GlobalStack.addExtruder [69]: Extruder [custom_extruder_5 #2] has already been added to this stack [ARTEMIS]
        2018-03-20 08:19:15,649 - WARNING - [(11228)-MainThread] UM.Settings.ContainerStack.addMetaDataEntry [166]: Meta data with key machine was already added.
        2018-03-20 08:19:15,650 - WARNING - [(11228)-MainThread] cura.Settings.ExtruderManager.registerExtruder [223]: Extruder [custom_extruder_5 #2] has already been registered on machine [ARTEMIS], not doing anything
        2018-03-20 08:19:15,651 - WARNING - [(11228)-MainThread] cura.Settings.GlobalStack.addExtruder [69]: Extruder [custom_extruder_1 #2] has already been added to this stack [ARTEMIS]
        2018-03-20 08:19:15,652 - WARNING - [(11228)-MainThread] UM.Settings.ContainerStack.addMetaDataEntry [166]: Meta data with key machine was already added.
        2018-03-20 08:19:15,653 - WARNING - [(11228)-MainThread] cura.Settings.ExtruderManager.registerExtruder [223]: Extruder [custom_extruder_1 #2] has already been registered on machine [ARTEMIS], not doing anything
        2018-03-20 08:19:15,658 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container fdmprinter
        2018-03-20 08:19:16,262 - DEBUG - [(11228)-MainThread] cura.Settings.MachineManager._checkStacksHaveErrors [423]: Checking 2 stacks for errors took 0.33 s
        2018-03-20 08:19:16,695 - DEBUG - [(11228)-MainThread] cura.Settings.MachineManager._checkStacksHaveErrors [423]: Checking 2 stacks for errors took 0.33 s
        2018-03-20 08:19:17,134 - DEBUG - [(11228)-MainThread] UM.Qt.Bindings.Theme.load [172]: Loading theme file: C:\Program Files\Ultimaker Cura 3.2\resources\themes\cura-dark\theme.json
        2018-03-20 08:19:17,136 - DEBUG - [(11228)-MainThread] UM.Qt.Bindings.Theme.load [172]: Loading theme file: C:\Program Files\Ultimaker Cura 3.2\resources\themes\cura-light\theme.json
        2018-03-20 08:19:17,230 - DEBUG - [(11228)-MainThread] UM.Qt.Bindings.Theme.load [240]: Loaded theme C:\Program Files\Ultimaker Cura 3.2\resources\themes\cura-light
        2018-03-20 08:19:17,232 - DEBUG - [(11228)-MainThread] UM.Qt.Bindings.Theme.load [240]: Loaded theme C:\Program Files\Ultimaker Cura 3.2\resources\themes\cura-dark
        2018-03-20 08:19:17,388 - DEBUG - [(11228)-MainThread] UM.Controller.setActiveView [92]: Setting active view to SolidView
        2018-03-20 08:19:18,656 - DEBUG - [(11228)-MainThread] UM3NetworkPrinting.DiscoverUM3Action._createAdditionalComponentsView [136]: Creating additional ui components for UM3.
        2018-03-20 08:19:18,681 - DEBUG - [(11228)-MainThread] UM3NetworkPrinting.DiscoverUM3Action.startDiscovery [36]: Starting printer discovery.
        2018-03-20 08:19:18,694 - DEBUG - [(11228)-MainThread] UM.Mesh.MeshData.calculateNormalsFromIndexedVertices [444]: Calculating normals took 0.0010008811950683594 seconds
        2018-03-20 08:19:18,715 - DEBUG - [(11228)-MainThread] UM.Controller.setActiveStage [155]: Setting active stage to PrepareStage
        2018-03-20 08:19:19,271 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_1_se300_abs_default
        2018-03-20 08:19:19,275 - DEBUG - [(11228)-MainThread] cura.Settings.MachineManager._onInstanceContainersChanged [365]: Connecting profiles model…
        2018-03-20 08:19:19,276 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_se300_pla_fine
        2018-03-20 08:19:19,279 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_he280-pla-default
        2018-03-20 08:19:19,284 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_se300_petg_default
        2018-03-20 08:19:19,288 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_1_se300_pla_fast
        2018-03-20 08:19:19,290 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_se300_pla_fast
        2018-03-20 08:19:19,293 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_se300_abs_default
        2018-03-20 08:19:19,297 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_1_se300_spiral_vase
        2018-03-20 08:19:19,299 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_1_se300_petg_default
        2018-03-20 08:19:19,301 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_fdmextruder_he280-pla-default
        2018-03-20 08:19:19,303 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_1_se300_pla_fine
        2018-03-20 08:19:19,305 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_se300_spiral_vase
        2018-03-20 08:19:19,315 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container low
        2018-03-20 08:19:19,317 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container high
        2018-03-20 08:19:19,319 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container draft
        2018-03-20 08:19:19,321 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container extra_coarse
        2018-03-20 08:19:19,323 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container coarse
        2018-03-20 08:19:19,627 - DEBUG - [(11228)-MainThread] UM.Mesh.MeshData.calculateNormalsFromIndexedVertices [444]: Calculating normals took 0.0020012855529785156 seconds
        2018-03-20 08:19:19,716 - DEBUG - [(11228)-MainThread] UM.Mesh.MeshData.calculateNormalsFromIndexedVertices [444]: Calculating normals took 0.0010008811950683594 seconds
        2018-03-20 08:19:20,149 - DEBUG - [(11228)-MainThread] cura.Settings.MachineManager._checkStacksHaveErrors [423]: Checking 2 stacks for errors took 0.32 s
        2018-03-20 08:19:20,408 - DEBUG - [(11228)-MainThread] UM.Mesh.MeshData.calculateNormalsFromIndexedVertices [444]: Calculating normals took 0.0015015602111816406 seconds
        2018-03-20 08:19:20,845 - DEBUG - [(11228)-MainThread] cura.Settings.MachineManager._checkStacksHaveErrors [423]: Checking 2 stacks for errors took 0.32 s
        2018-03-20 08:19:21,373 - DEBUG - [(11228)-MainThread] UM.Mesh.MeshData.calculateNormalsFromIndexedVertices [444]: Calculating normals took 0.0010018348693847656 seconds
        2018-03-20 08:19:21,602 - DEBUG - [(11228)-MainThread] UM.Qt.QtRenderer._initialize [184]: Support for Vertex Array Objects: True
        2018-03-20 08:19:21,609 - DEBUG - [(11228)-MainThread] UM.View.GL.OpenGL.init [92]: Initialized OpenGL subsystems.
        2018-03-20 08:19:21,610 - DEBUG - [(11228)-MainThread] UM.View.GL.OpenGL.init [93]: OpenGL Version: 4.1.0 NVIDIA 390.65
        2018-03-20 08:19:21,611 - DEBUG - [(11228)-MainThread] UM.View.GL.OpenGL.init [94]: OpenGL Vendor: NVIDIA Corporation
        2018-03-20 08:19:21,612 - DEBUG - [(11228)-MainThread] UM.View.GL.OpenGL.init [95]: OpenGL Renderer: GeForce GT 610/PCIe/SSE2
        2018-03-20 08:19:21,613 - DEBUG - [(11228)-MainThread] UM.View.GL.ShaderProgram.load [55]: Loading shader file [C:\Program Files\Ultimaker Cura 3.2\resources\shaders\default.shader]…
        2018-03-20 08:19:21,615 - DEBUG - [(11228)-MainThread] UM.View.GL.ShaderProgram.load [55]: Loading shader file [C:\Program Files\Ultimaker Cura 3.2\resources\shaders\selection.shader]…
        2018-03-20 08:19:21,617 - DEBUG - [(11228)-MainThread] UM.View.GL.ShaderProgram.load [55]: Loading shader file [C:\Program Files\Ultimaker Cura 3.2\resources\shaders\default.shader]…
        2018-03-20 08:19:21,620 - DEBUG - [(11228)-MainThread] UM.View.GL.ShaderProgram.load [55]: Loading shader file [C:\Program Files\Ultimaker Cura 3.2\resources\shaders\composite.shader]…
        2018-03-20 08:19:21,623 - DEBUG - [(11228)-MainThread] UM.View.GL.ShaderProgram.load [55]: Loading shader file [C:\Program Files\Ultimaker Cura 3.2\resources\shaders\overhang.shader]…
        2018-03-20 08:19:21,626 - DEBUG - [(11228)-MainThread] UM.View.GL.ShaderProgram.load [55]: Loading shader file [C:\Program Files\Ultimaker Cura 3.2\resources\shaders\striped.shader]…
        2018-03-20 08:19:21,629 - DEBUG - [(11228)-MainThread] UM.View.GL.ShaderProgram.load [55]: Loading shader file [C:\Program Files\Ultimaker Cura 3.2\resources\shaders\transparent_object.shader]…
        2018-03-20 08:19:21,631 - DEBUG - [(11228)-MainThread] UM.View.GL.ShaderProgram.load [55]: Loading shader file [C:\Program Files\Ultimaker Cura 3.2\resources\shaders\striped.shader]…
        2018-03-20 08:19:21,639 - DEBUG - [(11228)-MainThread] UM.View.GL.ShaderProgram.load [55]: Loading shader file [C:\Program Files\Ultimaker Cura 3.2\resources\shaders\default.shader]…
        2018-03-20 08:19:21,642 - DEBUG - [(11228)-MainThread] UM.View.GL.ShaderProgram.load [55]: Loading shader file [C:\Program Files\Ultimaker Cura 3.2\resources\shaders\grid.shader]…
        2018-03-20 08:19:21,645 - DEBUG - [(11228)-MainThread] UM.View.GL.ShaderProgram.load [55]: Loading shader file [C:\Program Files\Ultimaker Cura 3.2\resources\shaders\platform.shader]…
        2018-03-20 08:19:22,000 - DEBUG - [(11228)-MainThread] cura.Settings.MachineManager._checkStacksHaveErrors [423]: Checking 2 stacks for errors took 0.32 s
        2018-03-20 08:19:22,238 - DEBUG - [(11228)-MainThread] UM.Mesh.MeshData.calculateNormalsFromIndexedVertices [444]: Calculating normals took 0.0020017623901367188 seconds
        2018-03-20 08:19:22,767 - DEBUG - [(11228)-MainThread] cura.Settings.MachineManager._checkStacksHaveErrors [423]: Checking 2 stacks for errors took 0.32 s
        2018-03-20 08:19:23,262 - DEBUG - [(11228)-MainThread] CuraEngineBackend.CuraEngineBackend.slice [197]: starting to slice!
        2018-03-20 08:19:23,262 - DEBUG - [(11228)-MainThread] CuraEngineBackend.CuraEngineBackend.slice [214]: Going to slice build plate [0]!
        2018-03-20 08:19:23,263 - DEBUG - [(11228)-MainThread] CuraEngineBackend.CuraEngineBackend.slice [218]: Build plate 0 has no objects to be sliced, skipping
        2018-03-20 08:19:31,705 - DEBUG - [(15140)-Thread-9] USBPrinting.USBPrinterOutputDevice._connect [356]: Attempting to connect to printer with serial COM5 on baud rate 250000
        2018-03-20 08:19:32,198 - DEBUG - [(11228)-MainThread] AutoSave.AutoSave._onTimeout [71]: Autosaving preferences, instances and profiles
        2018-03-20 08:19:38,220 - DEBUG - [(15140)-Thread-9] USBPrinting.USBPrinterOutputDevice._connect [356]: Attempting to connect to printer with serial COM5 on baud rate 230400
        2018-03-20 08:19:44,735 - DEBUG - [(15140)-Thread-9] USBPrinting.USBPrinterOutputDevice._connect [356]: Attempting to connect to printer with serial COM5 on baud rate 57600
        2018-03-20 08:19:47,727 - INFO - [(11228)-MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [103]: Output Device DuetRRF-print already added
        2018-03-20 08:19:47,730 - INFO - [(11228)-MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [103]: Output Device DuetRRF-simulate already added
        2018-03-20 08:19:47,732 - INFO - [(11228)-MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [103]: Output Device DuetRRF-upload already added
        2018-03-20 08:19:51,251 - DEBUG - [(15140)-Thread-9] USBPrinting.USBPrinterOutputDevice._connect [356]: Attempting to connect to printer with serial COM5 on baud rate 38400
        2018-03-20 08:19:57,726 - DEBUG - [(11228)-MainThread] AutoSave.AutoSave._onTimeout [71]: Autosaving preferences, instances and profiles
        2018-03-20 08:19:57,765 - DEBUG - [(15140)-Thread-9] USBPrinting.USBPrinterOutputDevice._connect [356]: Attempting to connect to printer with serial COM5 on baud rate 19200
        2018-03-20 08:19:59,012 - DEBUG - [(2432)-Thread-5] UM.Mesh.MeshData.calculateNormalsFromVertices [421]: Calculating normals took 0.0010001659393310547 seconds
        2018-03-20 08:19:59,013 - DEBUG - [(2432)-Thread-5] STLReader.STLReader.read [79]: Loaded a mesh with 924 vertices
        2018-03-20 08:19:59,032 - DEBUG - [(11228)-MainThread] UM.Mesh.MeshData.approximateConvexHull [388]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.01901841163635254 seconds. 90 input vertices. 90 output vertices.
        2018-03-20 08:19:59,034 - DEBUG - [(2432)-Thread-5] UM.FileHandler.ReadFileJob.run [68]: Loading file took 0.0 seconds
        2018-03-20 08:19:59,056 - DEBUG - [(2432)-Thread-5] UM.Mesh.MeshData.approximateConvexHull [388]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.01901984214782715 seconds. 90 input vertices. 90 output vertices.
        2018-03-20 08:19:59,068 - WARNING - [(11228)-MainThread] UM.Qt.QtApplication.__onQmlWarning [267]: file:///C:/Program Files/Ultimaker Cura 3.2/qml/QtQuick/Controls/TextField.qml:638:5: QML TextInputWithHandles: Binding loop detected for property "text"
        2018-03-20 08:19:59,137 - DEBUG - [(11228)-MainThread] UM.View.GL.ShaderProgram.load [55]: Loading shader file [C:\Program Files\Ultimaker Cura 3.2\resources\shaders\transparent_object.shader]…
        2018-03-20 08:19:59,451 - DEBUG - [(11228)-MainThread] UM.Mesh.MeshData.calculateNormalsFromIndexedVertices [444]: Calculating normals took 0.0030028820037841797 seconds
        2018-03-20 08:19:59,617 - DEBUG - [(11228)-MainThread] CuraEngineBackend.CuraEngineBackend.slice [197]: starting to slice!
        2018-03-20 08:19:59,618 - DEBUG - [(11228)-MainThread] CuraEngineBackend.CuraEngineBackend.slice [214]: Going to slice build plate [0]!
        2018-03-20 08:20:02,008 - DEBUG - [(11228)-MainThread] CuraEngineBackend.CuraEngineBackend._onStartSliceCompleted [381]: Sending slice message took 2.388291358947754 seconds
        2018-03-20 08:20:02,137 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend] [WARNING] Setting an unregistered setting print_bed_temperature to 75
        2018-03-20 08:20:02,139 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend] [WARNING] Setting an unregistered setting initial_extruder_nr to 0
        2018-03-20 08:20:02,142 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend] [WARNING] Setting an unregistered setting print_temperature to 205
        2018-03-20 08:20:02,144 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend] [WARNING] Setting an unregistered setting time to 08:19:59
        2018-03-20 08:20:02,145 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend] [WARNING] Setting an unregistered setting day to Tue
        2018-03-20 08:20:02,146 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend] [WARNING] Setting an unregistered setting date to 20-03-2018
        2018-03-20 08:20:02,147 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend] [WARNING] -s wireframe_flow="100" -s machine_settings="0" -s date="20-03-2018" -s max_skin_angle_for_expansion="90" -s support_bottom_density="100" -s cooling="0" -s support_tree_wall_thickness="0.4" -s raft_speed="30.0" -s meshfix="0" -s speed="0" -s speed_wall="40.0" -s acceleration_wall="3000" -s wireframe_printspeed="5" -s support_skip_zag_per_mm="20" -s travel_compensate_overlapping_walls_enabled="True" -s experimental="0" -s top_thickness="0.8" -s line_width="0.4" -s bottom_thickness="0.8" -s switch_extruder_retraction_speeds="20" -s command_line_settings="0" -s jerk_print="20" -s machine_head_polygon="[[-1, 1], [-1, -1], [1, -1], [1, 1]]" -s jerk_layer_0="20" -s time="08:19:59" -s wall_extruder_nr="-1" -s speed_support="35" -s brim_width="8.0" -s jerk_wall="20" -s raft_acceleration="3000" -s support_interface_pattern="lines" -s support_interface_line_width="0.4" -s infill_sparse_density="15" -s print_temperature="205" -s resolution="0" -s skin_overlap="5" -s skin_preshrink="1.2000000000000002" -s support_z_distance="0.15" -s support_interface_enable="False" -s shell="0" -s machine_use_extruder_offset_to_offset_coords="True" -s retraction_hop_only_when_collides="False" -s start_layers_at_same_position="False" -s jerk_prime_tower="20" -s travel_avoid_other_parts="True" -s jerk_support_roof="20" -s jerk_print_layer_0="20" -s material_print_temp_prepend="True" -s jerk_travel="30" -s jerk_roofing="20" -s support_bottom_distance="0.15" -s jerk_wall_x="20" -s speed_layer_0="25" -s jerk_wall_0="20" -s machine_max_jerk_e="5.0" -s jerk_enabled="False" -s blackmagic="0" -s acceleration_support_roof="3000" -s prime_tower_enable="False" -s acceleration_wall_x="3000" -s support_bottom_line_width="0.5" -s max_feedrate_z_override="0" -s skirt_brim_minimal_length="200" -s raft_smoothing="5" -s cool_fan_full_at_height="0.3" -s conical_overhang_angle="50" -s skin_no_small_gaps_heuristic="True" -s speed_print="60" -s layer_start_x="0.0" -s speed_wall_x="50.0" -s speed_wall_0="45.0" -s speed_infill="60" -s switch_extruder_retraction_amount="16" -s spaghetti_infill_stepped="True" -s prime_tower_size="20" -s retraction_retract_speed="45" -s machine_nozzle_heat_up_speed="2.0" -s extruder_prime_pos_x="0" -s acceleration_support_interface="3000" -s print_bed_temperature="75" -s material_surface_energy="100" -s travel_avoid_distance="0.625" -s jerk_ironing="20" -s retraction_extra_prime_amount="0" -s cross_infill_pocket_size="8.0" -s material_print_temperature_layer_0="205" -s material_print_temperature="205" -s jerk_topbottom="20" -s draft_shield_height="10" -s min_skin_width_for_expansion="1.2246467991473532e-16" -s flow_rate_extrusion_offset_factor="100" -s speed_travel_layer_0="250" -s wireframe_roof_outer_delay="0.2" -s top_skin_expand_distance="1.2000000000000002" -s bottom_skin_preshrink="1.2000000000000002" -s extruder_prime_pos_abs="False" -s top_skin_preshrink="1.2000000000000002" -s adhesion_extruder_nr="0" -s infill_before_walls="False" -s gradual_infill_steps="0" -s infill_sparse_thickness="0.2" -s retraction_hop_enabled="True" -s layer_start_y="0.0" -s wireframe_flow_connection="100" -s skin_overlap_mm="0.02" -s speed_equalize_flow_enabled="False" -s mold_angle="40" -s acceleration_layer_0="3000" -s machine_start_gcode="G28 ;Home
        2018-03-20 08:20:02,148 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend] G1 Z15.0 F6000 ;Move the platform down 15mm
        2018-03-20 08:20:02,149 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend] ;Prime the extruder
        2018-03-20 08:20:02,150 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend] G92 E0
        2018-03-20 08:20:02,151 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend] G1 F200 E3
        2018-03-20 08:20:02,152 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend] G92 E0" -s wireframe_up_half_speed="0.3" -s machine_firmware_retract="False" -s infill_overlap_mm="0.04" -s outer_inset_first="False" -s raft_interface_line_spacing="1.0" -s infill_offset_x="0" -s magic_fuzzy_skin_enabled="False" -s infill_angles="[ ]" -s cross_infill_apply_pockets_alternatingly="True" -s zig_zaggify_infill="True" -s acceleration_topbottom="3000" -s material_extrusion_cool_down_speed="0.7" -s infill_pattern="cubic" -s support_tower_roof_angle="65" -s adaptive_layer_height_enabled="False" -s material_adhesion_tendency="10" -s machine_max_feedrate_x="500" -s travel_compensate_overlapping_walls_0_enabled="True" -s support="0" -s material_bed_temp_prepend="True" -s support_bottom_pattern="lines" -s machine_depth="290" -s speed_support_roof="23.333333333333332" -s wireframe_top_delay="0" -s acceleration_skirt_brim="3000" -s optimize_wall_printing_order="False" -s retraction_hop="1" -s machine_max_feedrate_z="5" -s acceleration_travel_layer_0="5000.0" -s layer_height="0.2" -s prime_tower_purge_volume="0" -s sub_div_rad_add="0.4" -s support_roof_line_width="0.5" -s machine_max_feedrate_y="500" -s meshfix_maximum_resolution="0.01" -s machine_max_acceleration_y="9000" -s machine_show_variants="False" -s gradual_support_infill_step_height="1" -s alternate_extra_perimeter="False" -s machine_nozzle_size="0.4" -s speed_prime_tower="60" -s machine_heat_zone_length="16" -s support_zag_skip_count="10" -s cutting_mesh="False" -s roofing_layer_count="0" -s wireframe_drag_along="0.6" -s machine_heated_bed="True" -s roofing_extruder_nr="-1" -s switch_extruder_retraction_speed="20" -s gantry_height="99999999999" -s ironing_inset="0.2" -s layer_0_z_overlap="0.15" -s wireframe_bottom_delay="0" -s acceleration_wall_0="3000" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s retraction_prime_speed="45" -s machine_nozzle_temp_enabled="True" -s gradual_infill_step_height="2.0" -s meshfix_keep_open_polygons="False" -s mesh_position_x="0" -s machine_width="290" -s top_layers="10" -s day="Tue" -s material_bed_temperature_layer_0="80" -s machine_max_acceleration_e="10000" -s support_bottom_height="1" -s coasting_speed="90" -s speed_equalize_flow_max="150" -s machine_nozzle_id="unknown" -s layer_height_0="0.3" -s support_conical_min_width="5.0" -s machine_nozzle_cool_down_speed="2.0" -s acceleration_travel="5000" -s raft_surface_jerk="20" -s multiple_mesh_overlap="0.15" -s material_diameter="1.75" -s top_bottom_extruder_nr="-1" -s machine_max_acceleration_z="100" -s acceleration_ironing="3000" -s extruder_prime_pos_z="0" -s infill_wipe_dist="0.1" -s machine_nozzle_tip_outer_diameter="1" -s wall_thickness="0.8" -s min_infill_area="0" -s machine_height="540" -s support_connect_zigzags="True" -s wall_x_extruder_nr="-1" -s brim_outside_only="True" -s infill_line_distance="8.0" -s machine_end_gcode="M104 S0
        2018-03-20 08:20:02,153 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend] M140 S0
        2018-03-20 08:20:02,154 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend] ;Retract the filament
        2018-03-20 08:20:02,156 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend] G92 E1
        2018-03-20 08:20:02,157 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend] G1 E-1 F300
        2018-03-20 08:20:02,158 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend] G28 X0 Y0
        2018-03-20 08:20:02,159 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend] M84" -s skirt_brim_line_width="0.4" -s acceleration_support="3000" -s brim_line_count="3" -s machine_max_acceleration_x="9000" -s slicing_tolerance="middle" -s ooze_shield_dist="2" -s ironing_flow="10.0" -s infill_line_width="0.4" -s fill_outline_gaps="False" -s machine_filament_park_distance="16" -s acceleration_print_layer_0="3000" -s speed_roofing="45.0" -s material_standby_temperature="150" -s infill_extruder_nr="-1" -s skin_angles="[ ]" -s jerk_infill="20" -s acceleration_infill="3000" -s travel_retract_before_outer_wall="False" -s switch_extruder_prime_speed="20" -s raft_base_acceleration="3000" -s jerk_skirt_brim="20" -s z_seam_relative="False" -s machine_shape="elliptic" -s cool_fan_speed="100.0" -s speed_travel="400" -s alternate_carve_order="True" -s spaghetti_inset="0.2" -s cool_fan_full_layer="3" -s retraction_count_max="90" -s magic_fuzzy_skin_point_dist="0.8" -s material_bed_temp_wait="True" -s bottom_layers="10" -s machine_max_jerk_xy="20.0" -s wall_line_width_0="0.4" -s acceleration_enabled="False" -s skin_alternate_rotation="False" -s material_bed_temperature="75" -s prime_tower_line_width="0.4" -s machine_gcode_flavor="RepRap (RepRap)" -s wall_0_extruder_nr="-1" -s retraction_hop_after_extruder_switch="True" -s travel="0" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s material_print_temp_wait="True" -s wall_line_count="3" -s machine_minimum_feedrate="0.0" -s machine_name="Unknown" -s wall_line_width_x="0.4" -s raft_surface_line_width="0.4" -s wall_0_wipe_dist="0.2" -s machine_nozzle_expansion_angle="45" -s top_bottom_pattern="lines" -s support_line_width="0.4" -s machine_acceleration="4000" -s wall_0_inset="0" -s machine_center_is_zero="True" -s smooth_spiralized_contours="True" -s skin_line_width="0.4" -s raft_interface_jerk="20" -s retraction_amount="3.2" -s machine_max_jerk_z="0.4" -s z_seam_corner="z_seam_corner_inner" -s machine_max_feedrate_e="299792458000" -s travel_compensate_overlapping_walls_x_enabled="True" -s raft_base_line_width="0.8" -s support_top_distance="0.15" -s machine_min_cool_heat_time_window="50.0" -s spaghetti_infill_extra_volume="0" -s xy_offset="0" -s carve_multiple_volumes="False" -s jerk_support="20" -s ironing_line_spacing="0.1" -s skirt_brim_speed="25" -s material_flow="97" -s xy_offset_layer_0="0" -s z_seam_y="870" -s support_interface_extruder_nr="0" -s wireframe_fall_down="0.5" -s default_material_print_temperature="205" -s infill_mesh="False" -s retraction_enable="True" -s skin_outline_count="1" -s ironing_only_highest_layer="False" -s retraction_extrusion_window="3.2" -s speed_support_infill="35" -s retract_at_layer_change="False" -s machine_extruder_count="1" -s ironing_enabled="False" -s retraction_min_travel="1.5" -s speed_ironing="30.0" -s ironing_pattern="zigzag" -s cool_fan_enabled="True" -s cool_fan_speed_min="75" -s magic_fuzzy_skin_point_density="1.25" -s wireframe_enabled="False" -s cool_min_layer_time_fan_speed_max="20" -s ooze_shield_angle="60" -s cool_lift_head="False" -s support_enable="False" -s fill_perimeter_gaps="everywhere" -s support_infill_extruder_nr="0" -s speed_support_bottom="23.333333333333332" -s support_extruder_nr_layer_0="0" -s skirt_line_count="3" -s filter_out_tiny_gaps="True" -s support_tree_branch_diameter_angle="5" -s raft_surface_line_spacing="0.4" -s infill_hollow="False" -s top_bottom_pattern_0="lines" -s support_roof_extruder_nr="0" -s jerk_travel_layer_0="30.0" -s support_bottom_extruder_nr="0" -s support_type="everywhere" -s nozzle_disallowed_areas="[]" -s support_angle="40" -s support_pattern="zigzag" -s support_line_distance="2.0" -s cool_min_layer_time="15" -s wireframe_roof_inset="3" -s support_interface_height="1" -s initial_layer_line_width_factor="100.0" -s support_xy_distance="1" -s support_xy_overrides_z="z_overrides_xy" -s support_bottom_stair_step_height="0.3" -s support_bottom_stair_step_width="5.0" -s jerk_support_interface="20" -s machine_disallowed_areas="[]" -s acceleration_prime_tower="3000" -s support_infill_sparse_thickness="0.2" -s dual_pre_wipe="True" -s mold_width="5" -s gradual_support_infill_steps="0" -s support_roof_enable="False" -s support_bottom_enable="False" -s retraction_speed="45" -s support_roof_height="1" -s support_interface_skip_height="0.3" -s support_roof_line_distance="0.5" -s support_tree_branch_diameter="2" -s infill_overlap="10" -s support_bottom_line_distance="0.5" -s material="0" -s support_roof_pattern="lines" -s prime_tower_wipe_enabled="True" -s support_tower_diameter="3.0" -s support_join_distance="2.0" -s remove_empty_first_layers="True" -s support_minimal_diameter="3.0" -s infill_mesh_order="0" -s cool_fan_speed_max="100" -s support_mesh_drop_down="True" -s bottom_skin_expand_distance="1.2000000000000002" -s prime_blob_enable="True" -s extruder_prime_pos_y="0" -s support_infill_rate="20" -s adhesion_type="skirt" -s skirt_gap="3" -s support_interface_density="100" -s prime_tower_position_x="285.3" -s cool_fan_speed_0="0" -s raft_airgap="0.3" -s support_mesh="False" -s support_xy_distance_overhang="1.25" -s raft_surface_thickness="0.2" -s prime_tower_flow="97" -s raft_interface_thickness="0.30000000000000004" -s z_seam_type="shortest" -s raft_interface_line_width="0.8" -s raft_base_thickness="0.36" -s raft_base_line_spacing="1.6" -s raft_interface_speed="22.5" -s support_offset="0.2" -s raft_base_speed="22.5" -s raft_surface_acceleration="3000" -s platform_adhesion="0" -s speed_print_layer_0="25" -s raft_interface_acceleration="3000" -s raft_base_jerk="20" -s raft_surface_fan_speed="0" -s adaptive_layer_height_variation_step="0.01" -s draft_shield_dist="10" -s raft_interface_fan_speed="0" -s support_skip_some_zags="False" -s support_tree_enable="False" -s support_roof_density="100" -s meshfix_union_all="True" -s acceleration_support_infill="3000" -s meshfix_union_all_remove_holes="False" -s mold_enabled="False" -s mold_roof_height="0.5" -s magic_mesh_surface_mode="normal" -s anti_overhang_mesh="False" -s relative_extrusion="False" -s support_tree_angle="40" -s support_tree_collision_resolution="0.2" -s support_tree_wall_count="1" -s retraction_combing="off" -s raft_jerk="20" -s roofing_line_width="0.4" -s acceleration_support_bottom="3000" -s roofing_pattern="lines" -s infill_offset_y="0" -s roofing_angles="[ ]" -s raft_margin="15" -s infill_enable_travel_optimization="False" -s mesh_position_y="0" -s material_flow_dependent_temperature="False" -s conical_overhang_enabled="False" -s draft_shield_enabled="False" -s draft_shield_height_limitation="full" -s coasting_min_volume="0.8" -s spaghetti_infill_enabled="False" -s spaghetti_max_infill_angle="10" -s speed_topbottom="45.0" -s magic_spiralize="False" -s spaghetti_max_height="2.0" -s spaghetti_flow="20" -s machine_nozzle_head_distance="3" -s support_conical_enabled="False" -s support_conical_angle="30" -s jerk_support_bottom="20" -s magic_fuzzy_skin_thickness="0.3" -s acceleration_roofing="3000" -s flow_rate_max_extrusion_offset="0" -s mesh_position_z="0" -s wireframe_height="3" -s prime_tower_wall_thickness="1.0" -s ooze_shield_enabled="False" -s coasting_enable="True" -s wireframe_printspeed_bottom="5" -s wireframe_printspeed_up="5" -s prime_tower_position_y="265.3" -s z_seam_x="145.0" -s raft_surface_speed="30.0" -s wireframe_printspeed_down="5" -s raft_base_fan_speed="0" -s wireframe_printspeed_flat="5" -s wireframe_flow_flat="100" -s wireframe_flat_delay="0.1" -s wireframe_top_jump="0.6" -s coasting_volume="0.1" -s wireframe_strategy="compensate" -s wireframe_straight_before_down="20" -s print_sequence="all_at_once" -s support_use_towers="True" -s wireframe_roof_fall_down="2" -s speed_slowdown_layers="1" -s material_final_print_temperature="205" -s wireframe_roof_drag_along="0.8" -s wireframe_nozzle_clearance="1" -s meshfix_extensive_stitching="False" -s adaptive_layer_height_variation="0.1" -s speed_support_interface="23.333333333333332" -s adaptive_layer_height_threshold="200.0" -s center_object="False" -s raft_surface_layers="2" -s prime_tower_min_volume="10" -s support_extruder_nr="0" -s support_tree_branch_distance="4" -s expand_skins_expand_distance="1.2000000000000002" -s raft_fan_speed="0" -s acceleration_print="3000" -s jerk_support_infill="20" -s machine_head_with_fans_polygon="[[-20, 10], [-20, -10], [10, 10], [10, -10]]" -s wall_line_width="0.4" -s top_bottom_thickness="0.8" -s infill="0" -s dual="0" -s cool_min_speed="10" -s material_initial_print_temperature="205" -s initial_extruder_nr="0" -g -e0 -s jerk_support_interface="20" -s meshfix_union_all="True" -s coasting_enable="False" -s material_surface_energy="100" -s support_line_width="0.5" -s support_conical_angle="30" -s machine_settings="0" -s support_bottom_stair_step_width="5.0" -s spaghetti_flow="20" -s raft_surface_speed="30.0" -s xy_offset="0" -s raft_surface_acceleration="3000" -s max_skin_angle_for_expansion="90" -s speed_ironing="20.0" -s support_bottom_height="1" -s acceleration_support_bottom="3000" -s support_bottom_density="100" -s infill_line_distance="6.666666666666667" -s optimize_wall_printing_order="False" -s raft_base_jerk="20" -s z_seam_y="870" -s meshfix_union_all_remove_holes="False" -s support_roof_enable="False" -s travel="0" -s retraction_extrusion_window="3.2" -s blackmagic="0" -s xy_offset_layer_0="0" -s jerk_wall_x="20" -s support_tree_wall_thickness="0.5" -s jerk_support_bottom="20" -s raft_speed="30.0" -s center_object="False" -s cool_fan_speed_0="0" -s speed="0" -s layer_start_x="0.0" -s roofing_angles="[ ]" -s acceleration_travel_layer_0="5000.0" -s material_flow="100" -s retraction_prime_speed="45" -s roofing_layer_count="0" -s machine_nozzle_head_distance="3" -s prime_tower_line_width="0.5" -s acceleration_wall="3000" -s support_tower_diameter="3.0" -s z_seam_corner="z_seam_corner_inner" -s cool_fan_speed_min="75" -s infill_offset_y="0" -s material_print_temperature_layer_0="215" -s extruder_prime_pos_abs="False" -s material="0" -s default_material_print_temperature="210" -s acceleration_print_layer_0="3000" -s dual_pre_wipe="True" -s support_line_distance="2.5" -s retraction_min_travel="1.0" -s support="0" -s support_bottom_stair_step_height="0.3" -s support_bottom_enable="False" -s speed_infill="60" -s retraction_speed="45" -s retraction_amount="3.2" -s speed_prime_tower="60" -s top_thickness="0.8" -s skirt_gap="3" -s jerk_support_infill="20" -s bottom_skin_preshrink="1.0" -s support_xy_distance_overhang="1.25" -s travel_compensate_overlapping_walls_x_enabled="True" -s raft_interface_acceleration="3000" -s raft_surface_layers="2" -s fill_outline_gaps="True" -s ironing_flow="10.0" -s top_layers="4" -s machine_nozzle_temp_enabled="True" -s alternate_extra_perimeter="False" -s skirt_brim_speed="30.0" -s retraction_hop="1" -s prime_blob_enable="True" -s material_extrusion_cool_down_speed="0.7" -s roofing_line_width="0.5" -s line_width="0.5" -s ironing_pattern="zigzag" -s conical_overhang_enabled="False" -s bottom_thickness="0.8" -s support_infill_rate="20" -s jerk_support="20" -s speed_support_roof="23.333333333333332" -s infill_enable_travel_optimization="False" -s mold_roof_height="0.5" -s acceleration_topbottom="3000" -s raft_interface_speed="22.5" -s speed_equalize_flow_max="150" -s raft_base_line_spacing="2.0" -s switch_extruder_retraction_amount="16" -s switch_extruder_retraction_speeds="20" -s acceleration_support_infill="3000" -s support_skip_zag_per_mm="20" -s filter_out_tiny_gaps="True" -s raft_surface_fan_speed="0" -s cross_infill_apply_pockets_alternatingly="True" -s infill_angles="[ ]" -s meshfix_maximum_resolution="0.01" -s support_roof_line_width="0.5" -s material_standby_temperature="175" -s support_tower_roof_angle="65" -s gradual_infill_steps="0" -s acceleration_infill="3000" -s skin_outline_count="1" -s cool_fan_full_at_height="0.3" -s cool_lift_head="False" -s infill_overlap="10" -s skin_preshrink="1.0" -s retraction_hop_enabled="True" -s acceleration_support="3000" -s meshfix="0" -s ironing_only_highest_layer="False" -s cool_min_speed="5" -s support_bottom_pattern="lines" -s support_bottom_line_width="0.5" -s cool_fan_full_layer="3" -s speed_travel="120" -s support_xy_overrides_z="z_overrides_xy" -s speed_travel_layer_0="60.0" -s speed_support="35" -s experimental="0" -s top_skin_expand_distance="1.0" -s raft_interface_thickness="0.30000000000000004" -s machine_nozzle_cool_down_speed="2.0" -s raft_interface_line_width="1.0" -s support_z_distance="0.15" -s bottom_layers="4" -s cool_fan_enabled="True" -s magic_fuzzy_skin_point_dist="0.8" -s retraction_count_max="90" -s travel_avoid_other_parts="True" -s slicing_tolerance="middle" -s travel_avoid_distance="0.625" -s cross_infill_pocket_size="6.666666666666667" -s material_final_print_temperature="215" -s layer_0_z_overlap="0.15" -s support_conical_enabled="False" -s brim_width="8.0" -s acceleration_wall_x="3000" -s dual="0" -s machine_filament_park_distance="16" -s skin_overlap="5" -s jerk_support_roof="20" -s support_roof_pattern="lines" -s zig_zaggify_infill="True" -s expand_skins_expand_distance="1.0" -s bottom_skin_expand_distance="1.0" -s brim_outside_only="True" -s support_bottom_line_distance="0.5" -s wall_line_width_0="0.5" -s skin_alternate_rotation="False" -s acceleration_ironing="3000" -s extruder_prime_pos_z="0" -s infill="0" -s wall_0_wipe_dist="0.25" -s wall_line_width="0.5" -s coasting_volume="0.1" -s machine_nozzle_tip_outer_diameter="1" -s ironing_line_spacing="0.1" -s infill_wipe_dist="0.125" -s jerk_travel="30" -s speed_layer_0="30.0" -s prime_tower_min_volume="10" -s support_zag_skip_count="8" -s jerk_topbottom="20" -s magic_fuzzy_skin_point_density="1.25" -s material_print_temperature="210" -s top_bottom_pattern="lines" -s cool_fan_speed_max="100" -s gradual_support_infill_steps="0" -s extruder_prime_pos_y="0" -s machine_extruder_end_pos_x="0" -s roofing_pattern="lines" -s raft_surface_thickness="0.2" -s travel_compensate_overlapping_walls_enabled="True" -s infill_before_walls="False" -s support_minimal_diameter="3.0" -s speed_topbottom="30.0" -s machine_nozzle_offset_x="0" -s top_skin_preshrink="1.0" -s machine_heat_zone_length="16" -s shell="0" -s prime_tower_flow="100" -s sub_div_rad_add="0.5" -s gradual_support_infill_step_height="1" -s ironing_inset="0.25" -s acceleration_roofing="3000" -s top_bottom_pattern_0="lines" -s spaghetti_max_height="2.0" -s machine_extruder_end_pos_y="0" -s support_interface_skip_height="0.3" -s wall_line_width_x="0.5" -s raft_surface_line_width="0.5" -s layer_start_y="0.0" -s material_initial_print_temperature="215" -s raft_fan_speed="0" -s raft_base_fan_speed="0" -s support_roof_density="100" -s magic_mesh_surface_mode="normal" -s machine_nozzle_size="0.5" -s wall_thickness="0.8" -s switch_extruder_retraction_speed="20" -s extruder_nr="0" -s support_xy_distance="1" -s raft_interface_line_spacing="1.2" -s outer_inset_first="False" -s infill_overlap_mm="0.05" -s acceleration_prime_tower="3000" -s mold_enabled="False" -s material_flow_dependent_temperature="False" -s machine_extruder_start_pos_abs="False" -s support_top_distance="0.15" -s fill_perimeter_gaps="everywhere" -s raft_base_line_width="1.0" -s z_seam_x="145.0" -s support_tree_collision_resolution="0.25" -s support_join_distance="2.0" -s material_diameter="1.75" -s top_bottom_thickness="0.8" -s acceleration_print="3000" -s infill_sparse_thickness="0.2" -s raft_surface_line_spacing="0.5" -s skirt_line_count="3" -s infill_hollow="False" -s machine_nozzle_offset_y="0" -s raft_margin="15" -s cool_min_layer_time="15" -s wall_line_count="2" -s support_tree_wall_count="1" -s raft_jerk="20" -s speed_wall="30.0" -s speed_wall_0="30.0" -s jerk_prime_tower="20" -s travel_compensate_overlapping_walls_0_enabled="True" -s acceleration_skirt_brim="3000" -s support_tree_branch_distance="4" -s multiple_mesh_overlap="0.15" -s raft_surface_jerk="20" -s acceleration_travel="5000" -s raft_base_thickness="0.36" -s jerk_print_layer_0="20" -s speed_support_interface="23.333333333333332" -s acceleration_layer_0="3000" -s min_skin_width_for_expansion="4.898587196589413e-17" -s z_seam_relative="False" -s jerk_skirt_brim="20" -s machine_extruder_start_pos_y="0" -s support_interface_enable="False" -s support_pattern="zigzag" -s machine_extruder_start_pos_x="0" -s cool_min_layer_time_fan_speed_max="20" -s initial_layer_line_width_factor="100.0" -s jerk_travel_layer_0="30.0" -s min_infill_area="0" -s cool_fan_speed="100.0" -s infill_pattern="grid" -s coasting_speed="90" -s resolution="0" -s skin_line_width="0.5" -s raft_interface_jerk="20" -s raft_base_speed="22.5" -s speed_support_bottom="23.333333333333332" -s machine_nozzle_heat_up_speed="2.0" -s acceleration_support_interface="3000" -s extruder_prime_pos_x="0" -s retraction_retract_speed="45" -s material_guid="0ff92885-617b-4144-a03c-9989872454bc" -s spaghetti_max_infill_angle="10" -s ironing_enabled="False" -s raft_acceleration="3000" -s magic_fuzzy_skin_enabled="False" -s infill_offset_x="0" -s gradual_infill_step_height="2.0" -s meshfix_keep_open_polygons="False" -s mesh_position_x="0" -s spaghetti_infill_stepped="True" -s support_offset="0.2" -s jerk_roofing="20" -s support_bottom_distance="0.15" -s support_tree_branch_diameter="2" -s support_roof_line_distance="0.5" -s mold_width="5" -s support_infill_sparse_thickness="0.2" -s magic_fuzzy_skin_thickness="0.3" -s mold_angle="40" -s skin_overlap_mm="0.025" -s speed_equalize_flow_enabled="False" -s support_roof_height="1" -s support_interface_pattern="lines" -s infill_sparse_density="15" -s acceleration_support_roof="3000" -s machine_extruder_end_pos_abs="False" -s z_seam_type="sharpest_corner" -s wall_0_inset="0" -s cooling="0" -s raft_interface_fan_speed="0" -s support_skip_some_zags="False" -s prime_tower_purge_volume="0" -s raft_airgap="0.3" -s speed_wall_x="60.0" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s retraction_hop_after_extruder_switch="True" -s spaghetti_infill_enabled="False" -s skin_angles="[ ]" -s jerk_infill="20" -s jerk_print="20" -s support_interface_height="1" -s spaghetti_inset="0.2" -s support_connect_zigzags="True" -s retraction_hop_only_when_collides="False" -s support_interface_density="100" -s prime_tower_wipe_enabled="True" -s support_use_towers="True" -s conical_overhang_angle="50" -s raft_smoothing="5" -s jerk_wall="20" -s speed_support_infill="35" -s skirt_brim_minimal_length="200" -s platform_adhesion="0" -s jerk_wall_0="20" -s skirt_brim_line_width="0.5" -s support_interface_line_width="0.5" -s brim_line_count="3" -s material_adhesion_tendency="10" -s support_tree_branch_diameter_angle="5" -s support_conical_min_width="5.0" -s machine_nozzle_id="unknown" -s jerk_layer_0="20" -s retract_at_layer_change="False" -s speed_print="60" -s speed_roofing="30.0" -s skin_no_small_gaps_heuristic="True" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s acceleration_wall_0="3000" -s jerk_ironing="20" -s retraction_enable="True" -s max_feedrate_z_override="500" -s mesh_position_z="0" -s retraction_extra_prime_amount="0" -s mesh_position_y="0" -s support_tree_angle="40" -s spaghetti_infill_extra_volume="0" -s machine_min_cool_heat_time_window="50.0" -s speed_print_layer_0="30.0" -s infill_line_width="0.5" -s meshfix_extensive_stitching="False" -s coasting_min_volume="0.8" -s support_angle="40" -s switch_extruder_prime_speed="20" -s raft_base_acceleration="3000" -s command_line_settings="0" -e0 -l "0"
        2018-03-20 08:20:02,170 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend] [WARNING] There are empty layers (or layers with empty extruder plans) in the print! Temperature control and cross layer travel moves might suffer.
        2018-03-20 08:20:02,561 - DEBUG - [(11228)-MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [582]: Slicing took 2.9428465366363525 seconds
        2018-03-20 08:20:02,562 - DEBUG - [(11228)-MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [591]: See if there is more to slice…
        2018-03-20 08:20:02,564 - DEBUG - [(11228)-MainThread] UM.Backend.Backend._logSocketState [181]: Socket state changed to Closing
        2018-03-20 08:20:02,565 - DEBUG - [(11228)-MainThread] UM.Backend.Backend._onSocketError [203]: Socket debug: Arcus Error (13): Closing socket because other side requested close.
        2018-03-20 08:20:02,566 - DEBUG - [(11228)-MainThread] UM.Backend.Backend._logSocketState [183]: Socket state changed to Closed
        2018-03-20 08:20:02,567 - DEBUG - [(11228)-MainThread] CuraEngineBackend.CuraEngineBackend._onBackendQuit [722]: Backend quit with return code 0. Resetting process and socket.
        2018-03-20 08:20:04,283 - DEBUG - [(15140)-Thread-9] USBPrinting.USBPrinterOutputDevice._connect [356]: Attempting to connect to printer with serial COM5 on baud rate 9600
        2018-03-20 08:20:04,610 - INFO - [(11228)-MainThread] cura.CuraApplication.deleteAll [1052]: Clearing scene
        2018-03-20 08:20:04,616 - WARNING - [(11228)-MainThread] UM.Qt.QtApplication.__onQmlWarning [267]: file:///C:/Program Files/Ultimaker Cura 3.2/qml/QtQuick/Controls/TextField.qml:638:5: QML TextInputWithHandles: Binding loop detected for property "text"
        2018-03-20 08:20:05,144 - DEBUG - [(11228)-MainThread] UM.Mesh.MeshData.calculateNormalsFromIndexedVertices [444]: Calculating normals took 0.0020020008087158203 seconds
        2018-03-20 08:20:05,558 - DEBUG - [(11228)-MainThread] cura.Settings.MachineManager._checkStacksHaveErrors [423]: Checking 2 stacks for errors took 0.31 s
        2018-03-20 08:20:06,137 - DEBUG - [(11228)-MainThread] CuraEngineBackend.CuraEngineBackend.slice [197]: starting to slice!
        2018-03-20 08:20:06,137 - DEBUG - [(11228)-MainThread] CuraEngineBackend.CuraEngineBackend.slice [214]: Going to slice build plate [0]!
        2018-03-20 08:20:06,137 - DEBUG - [(11228)-MainThread] CuraEngineBackend.CuraEngineBackend.slice [218]: Build plate 0 has no objects to be sliced, skipping
        2018-03-20 08:20:08,744 - DEBUG - [(14864)-Thread-3] UM.Mesh.MeshData.calculateNormalsFromVertices [421]: Calculating normals took 0.0 seconds
        2018-03-20 08:20:08,745 - DEBUG - [(14864)-Thread-3] STLReader.STLReader.read [79]: Loaded a mesh with 3018 vertices
        2018-03-20 08:20:08,759 - DEBUG - [(11228)-MainThread] UM.Mesh.MeshData.approximateConvexHull [388]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.012011051177978516 seconds. 27 input vertices. 27 output vertices.
        2018-03-20 08:20:08,762 - DEBUG - [(14864)-Thread-3] UM.FileHandler.ReadFileJob.run [68]: Loading file took 0.0 seconds
        2018-03-20 08:20:08,781 - DEBUG - [(14864)-Thread-3] UM.Mesh.MeshData.approximateConvexHull [388]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.018017292022705078 seconds. 27 input vertices. 27 output vertices.
        2018-03-20 08:20:08,794 - WARNING - [(11228)-MainThread] UM.Qt.QtApplication.__onQmlWarning [267]: file:///C:/Program Files/Ultimaker Cura 3.2/qml/QtQuick/Controls/TextField.qml:638:5: QML TextInputWithHandles: Binding loop detected for property "text"
        2018-03-20 08:20:09,215 - DEBUG - [(11228)-MainThread] UM.Mesh.MeshData.calculateNormalsFromIndexedVertices [444]: Calculating normals took 0.003002643585205078 seconds
        2018-03-20 08:20:09,353 - DEBUG - [(11228)-MainThread] CuraEngineBackend.CuraEngineBackend.slice [197]: starting to slice!
        2018-03-20 08:20:09,354 - DEBUG - [(11228)-MainThread] CuraEngineBackend.CuraEngineBackend.slice [214]: Going to slice build plate [0]!
        2018-03-20 08:20:09,356 - DEBUG - [(11228)-MainThread] UM.Backend.Backend._createSocket [213]: Previous socket existed. Closing that first.
        2018-03-20 08:20:09,366 - DEBUG - [(11228)-MainThread] UM.Backend.Backend._logSocketState [173]: Socket state changed to Listening
        2018-03-20 08:20:09,421 - INFO - [(11228)-MainThread] UM.Backend.Backend.startEngine [74]: Started engine process: C:\Program Files\Ultimaker Cura 3.2\CuraEngine.exe
        2018-03-20 08:20:09,425 - DEBUG - [(11228)-MainThread] UM.Backend.Backend._backendLog [90]: [Backend] Calling engine with: ['C:\Program Files\Ultimaker Cura 3.2\CuraEngine.exe', 'connect', '127.0.0.1:49674', '-j', 'C:\Program Files\Ultimaker Cura 3.2\resources\definitions\fdmprinter.def.json', '']
        2018-03-20 08:20:09,478 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend]
        2018-03-20 08:20:09,481 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend] Cura_SteamEngine version DEV
        2018-03-20 08:20:09,495 - DEBUG - [(11228)-MainThread] UM.Backend.Backend._logSocketState [177]: Socket state changed to Connected
        2018-03-20 08:20:09,497 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend] Copyright (C) 2017 Ultimaker
        2018-03-20 08:20:09,639 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend]
        2018-03-20 08:20:09,642 - DEBUG - [(11228)-MainThread] UM.Backend.Backend._onSocketStateChanged [167]: Backend connected on port 49674
        2018-03-20 08:20:09,666 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend] This program is free software: you can redistribute it and/or modify
        2018-03-20 08:20:09,752 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend] it under the terms of the GNU Affero General Public License as published by
        2018-03-20 08:20:09,768 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend] the Free Software Foundation, either version 3 of the License, or
        2018-03-20 08:20:09,777 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend] (at your option) any later version.
        2018-03-20 08:20:09,805 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend]
        2018-03-20 08:20:09,823 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend] This program is distributed in the hope that it will be useful,
        2018-03-20 08:20:09,871 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend] but WITHOUT ANY WARRANTY; without even the implied warranty of
        2018-03-20 08:20:09,930 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend] MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
        2018-03-20 08:20:10,020 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend] GNU Affero General Public License for more details.
        2018-03-20 08:20:10,089 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend]
        2018-03-20 08:20:10,120 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend] You should have received a copy of the GNU Affero General Public License
        2018-03-20 08:20:10,171 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend] along with this program. If not, see <http://www.gnu.org/licenses/>.
        2018-03-20 08:20:10,843 - ERROR - [(15140)-Thread-9] USBPrinting.USBPrinterOutputDevice._connect [394]: Baud rate detection for COM5 failed
        2018-03-20 08:20:10,844 - DEBUG - [(15140)-Thread-9] USBPrinting.USBPrinterOutputDevice.close [408]: Closing the USB printer connection.
        2018-03-20 08:20:10,846 - DEBUG - [(15140)-Thread-9] USBPrinting.USBPrinterOutputDevice.close [413]: PrinterConnection.close: cannot join current thread (expected)
        2018-03-20 08:20:10,849 - WARNING - [(11228)-MainThread] UM.OutputDevice.OutputDeviceManager.removeOutputDevice [126]: Could not find output device with id COM5 to remove
        2018-03-20 08:20:11,647 - DEBUG - [(11228)-MainThread] CuraEngineBackend.CuraEngineBackend._onStartSliceCompleted [381]: Sending slice message took 2.2932746410369873 seconds
        2018-03-20 08:20:11,834 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend] [WARNING] Setting an unregistered setting print_bed_temperature to 60.0
        2018-03-20 08:20:11,836 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend] [WARNING] Setting an unregistered setting initial_extruder_nr to 0
        2018-03-20 08:20:11,838 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend] [WARNING] Setting an unregistered setting print_temperature to 205
        2018-03-20 08:20:11,842 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend] [WARNING] Setting an unregistered setting time to 08:20:09
        2018-03-20 08:20:11,843 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend] [WARNING] Setting an unregistered setting day to Tue
        2018-03-20 08:20:11,844 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend] [WARNING] Setting an unregistered setting date to 20-03-2018
        2018-03-20 08:20:11,845 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend] [WARNING] -s wireframe_flow="100" -s machine_settings="0" -s date="20-03-2018" -s max_skin_angle_for_expansion="90" -s support_bottom_density="100" -s cooling="0" -s support_tree_wall_thickness="0.4" -s raft_speed="30.0" -s meshfix="0" -s speed="0" -s speed_wall="40.0" -s acceleration_wall="3000" -s wireframe_printspeed="5" -s support_skip_zag_per_mm="20" -s travel_compensate_overlapping_walls_enabled="True" -s experimental="0" -s top_thickness="0.8" -s line_width="0.4" -s bottom_thickness="0.8" -s switch_extruder_retraction_speeds="20" -s command_line_settings="0" -s jerk_print="20" -s machine_head_polygon="[[-1, 1], [-1, -1], [1, -1], [1, 1]]" -s jerk_layer_0="20" -s time="08:20:09" -s wall_extruder_nr="-1" -s speed_support="35" -s brim_width="8.0" -s jerk_wall="20" -s raft_acceleration="3000" -s support_interface_pattern="lines" -s support_interface_line_width="0.4" -s infill_sparse_density="15" -s print_temperature="205" -s resolution="0" -s skin_overlap="5" -s skin_preshrink="1.2000000000000002" -s support_z_distance="0.15" -s support_interface_enable="False" -s shell="0" -s machine_use_extruder_offset_to_offset_coords="True" -s retraction_hop_only_when_collides="False" -s start_layers_at_same_position="False" -s jerk_prime_tower="20" -s travel_avoid_other_parts="True" -s jerk_support_roof="20" -s jerk_print_layer_0="20" -s material_print_temp_prepend="True" -s jerk_travel="30" -s jerk_roofing="20" -s support_bottom_distance="0.15" -s jerk_wall_x="20" -s speed_layer_0="25" -s jerk_wall_0="20" -s machine_max_jerk_e="5.0" -s jerk_enabled="False" -s blackmagic="0" -s acceleration_support_roof="3000" -s prime_tower_enable="False" -s acceleration_wall_x="3000" -s support_bottom_line_width="0.5" -s max_feedrate_z_override="0" -s skirt_brim_minimal_length="200" -s raft_smoothing="5" -s cool_fan_full_at_height="0.3" -s conical_overhang_angle="50" -s skin_no_small_gaps_heuristic="True" -s speed_print="60" -s layer_start_x="0.0" -s speed_wall_x="50.0" -s speed_wall_0="45.0" -s speed_infill="60" -s switch_extruder_retraction_amount="16" -s spaghetti_infill_stepped="True" -s prime_tower_size="20" -s retraction_retract_speed="45" -s machine_nozzle_heat_up_speed="2.0" -s extruder_prime_pos_x="0" -s acceleration_support_interface="3000" -s print_bed_temperature="60.0" -s material_surface_energy="100" -s travel_avoid_distance="0.625" -s jerk_ironing="20" -s retraction_extra_prime_amount="0" -s cross_infill_pocket_size="8.0" -s material_print_temperature_layer_0="205" -s material_print_temperature="205" -s jerk_topbottom="20" -s draft_shield_height="10" -s min_skin_width_for_expansion="1.2246467991473532e-16" -s flow_rate_extrusion_offset_factor="100" -s speed_travel_layer_0="250" -s wireframe_roof_outer_delay="0.2" -s top_skin_expand_distance="1.2000000000000002" -s bottom_skin_preshrink="1.2000000000000002" -s extruder_prime_pos_abs="False" -s top_skin_preshrink="1.2000000000000002" -s adhesion_extruder_nr="0" -s infill_before_walls="False" -s gradual_infill_steps="0" -s infill_sparse_thickness="0.2" -s retraction_hop_enabled="True" -s layer_start_y="0.0" -s wireframe_flow_connection="100" -s skin_overlap_mm="0.02" -s speed_equalize_flow_enabled="False" -s mold_angle="40" -s acceleration_layer_0="3000" -s machine_start_gcode="G28 ;Home
        2018-03-20 08:20:11,846 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend] G1 Z15.0 F6000 ;Move the platform down 15mm
        2018-03-20 08:20:11,847 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend] ;Prime the extruder
        2018-03-20 08:20:11,849 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend] G92 E0
        2018-03-20 08:20:11,850 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend] G1 F200 E3
        2018-03-20 08:20:11,851 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend] G92 E0" -s wireframe_up_half_speed="0.3" -s machine_firmware_retract="False" -s infill_overlap_mm="0.04" -s outer_inset_first="False" -s raft_interface_line_spacing="1.0" -s infill_offset_x="0" -s magic_fuzzy_skin_enabled="False" -s infill_angles="[ ]" -s cross_infill_apply_pockets_alternatingly="True" -s zig_zaggify_infill="True" -s acceleration_topbottom="3000" -s material_extrusion_cool_down_speed="0.7" -s infill_pattern="cubic" -s support_tower_roof_angle="65" -s adaptive_layer_height_enabled="False" -s material_adhesion_tendency="10" -s machine_max_feedrate_x="500" -s travel_compensate_overlapping_walls_0_enabled="True" -s support="0" -s material_bed_temp_prepend="True" -s support_bottom_pattern="lines" -s machine_depth="290" -s speed_support_roof="23.333333333333332" -s wireframe_top_delay="0" -s acceleration_skirt_brim="3000" -s optimize_wall_printing_order="False" -s retraction_hop="1" -s machine_max_feedrate_z="5" -s acceleration_travel_layer_0="5000.0" -s layer_height="0.2" -s prime_tower_purge_volume="0" -s sub_div_rad_add="0.4" -s support_roof_line_width="0.5" -s machine_max_feedrate_y="500" -s meshfix_maximum_resolution="0.01" -s machine_max_acceleration_y="9000" -s machine_show_variants="False" -s gradual_support_infill_step_height="1" -s alternate_extra_perimeter="False" -s machine_nozzle_size="0.4" -s speed_prime_tower="60" -s machine_heat_zone_length="16" -s support_zag_skip_count="10" -s cutting_mesh="False" -s roofing_layer_count="0" -s wireframe_drag_along="0.6" -s machine_heated_bed="True" -s roofing_extruder_nr="-1" -s switch_extruder_retraction_speed="20" -s gantry_height="99999999999" -s ironing_inset="0.2" -s layer_0_z_overlap="0.15" -s wireframe_bottom_delay="0" -s acceleration_wall_0="3000" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s retraction_prime_speed="45" -s machine_nozzle_temp_enabled="True" -s gradual_infill_step_height="2.0" -s meshfix_keep_open_polygons="False" -s mesh_position_x="0" -s machine_width="290" -s top_layers="10" -s day="Tue" -s material_bed_temperature_layer_0="60.0" -s machine_max_acceleration_e="10000" -s support_bottom_height="1" -s coasting_speed="90" -s speed_equalize_flow_max="150" -s machine_nozzle_id="unknown" -s layer_height_0="0.3" -s support_conical_min_width="5.0" -s machine_nozzle_cool_down_speed="2.0" -s acceleration_travel="5000" -s raft_surface_jerk="20" -s multiple_mesh_overlap="0.15" -s material_diameter="1.75" -s top_bottom_extruder_nr="-1" -s machine_max_acceleration_z="100" -s acceleration_ironing="3000" -s extruder_prime_pos_z="0" -s infill_wipe_dist="0.1" -s machine_nozzle_tip_outer_diameter="1" -s wall_thickness="0.8" -s min_infill_area="0" -s machine_height="540" -s support_connect_zigzags="True" -s wall_x_extruder_nr="-1" -s brim_outside_only="True" -s infill_line_distance="8.0" -s machine_end_gcode="M104 S0
        2018-03-20 08:20:11,852 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend] M140 S0
        2018-03-20 08:20:11,853 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend] ;Retract the filament
        2018-03-20 08:20:11,854 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend] G92 E1
        2018-03-20 08:20:11,855 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend] G1 E-1 F300
        2018-03-20 08:20:11,856 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend] G28 X0 Y0
        2018-03-20 08:20:11,857 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend] M84" -s skirt_brim_line_width="0.4" -s acceleration_support="3000" -s brim_line_count="3" -s machine_max_acceleration_x="9000" -s slicing_tolerance="middle" -s ooze_shield_dist="2" -s ironing_flow="10.0" -s infill_line_width="0.4" -s fill_outline_gaps="False" -s machine_filament_park_distance="16" -s acceleration_print_layer_0="3000" -s speed_roofing="45.0" -s material_standby_temperature="150" -s infill_extruder_nr="-1" -s skin_angles="[ ]" -s jerk_infill="20" -s acceleration_infill="3000" -s travel_retract_before_outer_wall="False" -s switch_extruder_prime_speed="20" -s raft_base_acceleration="3000" -s jerk_skirt_brim="20" -s z_seam_relative="False" -s machine_shape="elliptic" -s cool_fan_speed="100.0" -s speed_travel="400" -s alternate_carve_order="True" -s spaghetti_inset="0.2" -s cool_fan_full_layer="3" -s retraction_count_max="90" -s magic_fuzzy_skin_point_dist="0.8" -s material_bed_temp_wait="True" -s bottom_layers="10" -s machine_max_jerk_xy="20.0" -s wall_line_width_0="0.4" -s acceleration_enabled="False" -s skin_alternate_rotation="False" -s material_bed_temperature="60.0" -s prime_tower_line_width="0.4" -s machine_gcode_flavor="RepRap (RepRap)" -s wall_0_extruder_nr="-1" -s retraction_hop_after_extruder_switch="True" -s travel="0" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s material_print_temp_wait="True" -s wall_line_count="3" -s machine_minimum_feedrate="0.0" -s machine_name="Unknown" -s wall_line_width_x="0.4" -s raft_surface_line_width="0.4" -s wall_0_wipe_dist="0.2" -s machine_nozzle_expansion_angle="45" -s top_bottom_pattern="lines" -s support_line_width="0.4" -s machine_acceleration="4000" -s wall_0_inset="0" -s machine_center_is_zero="True" -s smooth_spiralized_contours="True" -s skin_line_width="0.4" -s raft_interface_jerk="20" -s retraction_amount="3.2" -s machine_max_jerk_z="0.4" -s z_seam_corner="z_seam_corner_inner" -s machine_max_feedrate_e="299792458000" -s travel_compensate_overlapping_walls_x_enabled="True" -s raft_base_line_width="0.8" -s support_top_distance="0.15" -s machine_min_cool_heat_time_window="50.0" -s spaghetti_infill_extra_volume="0" -s xy_offset="0" -s carve_multiple_volumes="False" -s jerk_support="20" -s ironing_line_spacing="0.1" -s skirt_brim_speed="25" -s material_flow="97" -s xy_offset_layer_0="0" -s z_seam_y="870" -s support_interface_extruder_nr="0" -s wireframe_fall_down="0.5" -s default_material_print_temperature="205" -s infill_mesh="False" -s retraction_enable="True" -s skin_outline_count="1" -s ironing_only_highest_layer="False" -s retraction_extrusion_window="3.2" -s speed_support_infill="35" -s retract_at_layer_change="False" -s machine_extruder_count="1" -s ironing_enabled="False" -s retraction_min_travel="1.5" -s speed_ironing="30.0" -s ironing_pattern="zigzag" -s cool_fan_enabled="True" -s cool_fan_speed_min="75" -s magic_fuzzy_skin_point_density="1.25" -s wireframe_enabled="False" -s cool_min_layer_time_fan_speed_max="20" -s ooze_shield_angle="60" -s cool_lift_head="False" -s support_enable="False" -s fill_perimeter_gaps="everywhere" -s support_infill_extruder_nr="0" -s speed_support_bottom="23.333333333333332" -s support_extruder_nr_layer_0="0" -s skirt_line_count="3" -s filter_out_tiny_gaps="True" -s support_tree_branch_diameter_angle="5" -s raft_surface_line_spacing="0.4" -s infill_hollow="False" -s top_bottom_pattern_0="lines" -s support_roof_extruder_nr="0" -s jerk_travel_layer_0="30.0" -s support_bottom_extruder_nr="0" -s support_type="everywhere" -s nozzle_disallowed_areas="[]" -s support_angle="40" -s support_pattern="zigzag" -s support_line_distance="2.0" -s cool_min_layer_time="15" -s wireframe_roof_inset="3" -s support_interface_height="1" -s initial_layer_line_width_factor="100.0" -s support_xy_distance="1" -s support_xy_overrides_z="z_overrides_xy" -s support_bottom_stair_step_height="0.3" -s support_bottom_stair_step_width="5.0" -s jerk_support_interface="20" -s machine_disallowed_areas="[]" -s acceleration_prime_tower="3000" -s support_infill_sparse_thickness="0.2" -s dual_pre_wipe="True" -s mold_width="5" -s gradual_support_infill_steps="0" -s support_roof_enable="False" -s support_bottom_enable="False" -s retraction_speed="45" -s support_roof_height="1" -s support_interface_skip_height="0.3" -s support_roof_line_distance="0.5" -s support_tree_branch_diameter="2" -s infill_overlap="10" -s support_bottom_line_distance="0.5" -s material="0" -s support_roof_pattern="lines" -s prime_tower_wipe_enabled="True" -s support_tower_diameter="3.0" -s support_join_distance="2.0" -s remove_empty_first_layers="True" -s support_minimal_diameter="3.0" -s infill_mesh_order="0" -s cool_fan_speed_max="100" -s support_mesh_drop_down="True" -s bottom_skin_expand_distance="1.2000000000000002" -s prime_blob_enable="True" -s extruder_prime_pos_y="0" -s support_infill_rate="20" -s adhesion_type="skirt" -s skirt_gap="3" -s support_interface_density="100" -s prime_tower_position_x="285.3" -s cool_fan_speed_0="0" -s raft_airgap="0.3" -s support_mesh="False" -s support_xy_distance_overhang="1.25" -s raft_surface_thickness="0.2" -s prime_tower_flow="97" -s raft_interface_thickness="0.30000000000000004" -s z_seam_type="shortest" -s raft_interface_line_width="0.8" -s raft_base_thickness="0.36" -s raft_base_line_spacing="1.6" -s raft_interface_speed="22.5" -s support_offset="0.2" -s raft_base_speed="22.5" -s raft_surface_acceleration="3000" -s platform_adhesion="0" -s speed_print_layer_0="25" -s raft_interface_acceleration="3000" -s raft_base_jerk="20" -s raft_surface_fan_speed="0" -s adaptive_layer_height_variation_step="0.01" -s draft_shield_dist="10" -s raft_interface_fan_speed="0" -s support_skip_some_zags="False" -s support_tree_enable="False" -s support_roof_density="100" -s meshfix_union_all="True" -s acceleration_support_infill="3000" -s meshfix_union_all_remove_holes="False" -s mold_enabled="False" -s mold_roof_height="0.5" -s magic_mesh_surface_mode="normal" -s anti_overhang_mesh="False" -s relative_extrusion="False" -s support_tree_angle="40" -s support_tree_collision_resolution="0.2" -s support_tree_wall_count="1" -s retraction_combing="off" -s raft_jerk="20" -s roofing_line_width="0.4" -s acceleration_support_bottom="3000" -s roofing_pattern="lines" -s infill_offset_y="0" -s roofing_angles="[ ]" -s raft_margin="15" -s infill_enable_travel_optimization="False" -s mesh_position_y="0" -s material_flow_dependent_temperature="False" -s conical_overhang_enabled="False" -s draft_shield_enabled="False" -s draft_shield_height_limitation="full" -s coasting_min_volume="0.8" -s spaghetti_infill_enabled="False" -s spaghetti_max_infill_angle="10" -s speed_topbottom="45.0" -s magic_spiralize="False" -s spaghetti_max_height="2.0" -s spaghetti_flow="20" -s machine_nozzle_head_distance="3" -s support_conical_enabled="False" -s support_conical_angle="30" -s jerk_support_bottom="20" -s magic_fuzzy_skin_thickness="0.3" -s acceleration_roofing="3000" -s flow_rate_max_extrusion_offset="0" -s mesh_position_z="0" -s wireframe_height="3" -s prime_tower_wall_thickness="1.0" -s ooze_shield_enabled="False" -s coasting_enable="True" -s wireframe_printspeed_bottom="5" -s wireframe_printspeed_up="5" -s prime_tower_position_y="265.3" -s z_seam_x="145.0" -s raft_surface_speed="30.0" -s wireframe_printspeed_down="5" -s raft_base_fan_speed="0" -s wireframe_printspeed_flat="5" -s wireframe_flow_flat="100" -s wireframe_flat_delay="0.1" -s wireframe_top_jump="0.6" -s coasting_volume="0.1" -s wireframe_strategy="compensate" -s wireframe_straight_before_down="20" -s print_sequence="all_at_once" -s support_use_towers="True" -s wireframe_roof_fall_down="2" -s speed_slowdown_layers="1" -s material_final_print_temperature="205" -s wireframe_roof_drag_along="0.8" -s wireframe_nozzle_clearance="1" -s meshfix_extensive_stitching="False" -s adaptive_layer_height_variation="0.1" -s speed_support_interface="23.333333333333332" -s adaptive_layer_height_threshold="200.0" -s center_object="False" -s raft_surface_layers="2" -s prime_tower_min_volume="10" -s support_extruder_nr="0" -s support_tree_branch_distance="4" -s expand_skins_expand_distance="1.2000000000000002" -s raft_fan_speed="0" -s acceleration_print="3000" -s jerk_support_infill="20" -s machine_head_with_fans_polygon="[[-20, 10], [-20, -10], [10, 10], [10, -10]]" -s wall_line_width="0.4" -s top_bottom_thickness="0.8" -s infill="0" -s dual="0" -s cool_min_speed="10" -s material_initial_print_temperature="205" -s initial_extruder_nr="0" -g -e0 -s jerk_support_interface="20" -s meshfix_union_all="True" -s coasting_enable="False" -s material_surface_energy="100" -s support_line_width="0.5" -s support_conical_angle="30" -s machine_settings="0" -s support_bottom_stair_step_width="5.0" -s spaghetti_flow="20" -s raft_surface_speed="30.0" -s xy_offset="0" -s raft_surface_acceleration="3000" -s max_skin_angle_for_expansion="90" -s speed_ironing="30.0" -s support_bottom_height="1" -s acceleration_support_bottom="3000" -s support_bottom_density="100" -s infill_line_distance="10.0" -s optimize_wall_printing_order="False" -s raft_base_jerk="20" -s z_seam_y="870" -s meshfix_union_all_remove_holes="False" -s support_roof_enable="False" -s travel="0" -s retraction_extrusion_window="3.2" -s blackmagic="0" -s xy_offset_layer_0="0" -s jerk_wall_x="20" -s support_tree_wall_thickness="0.5" -s jerk_support_bottom="20" -s raft_speed="30.0" -s center_object="False" -s cool_fan_speed_0="0" -s speed="0" -s layer_start_x="0.0" -s roofing_angles="[ ]" -s acceleration_travel_layer_0="5000.0" -s material_flow="100" -s retraction_prime_speed="45" -s roofing_layer_count="0" -s machine_nozzle_head_distance="3" -s prime_tower_line_width="0.5" -s acceleration_wall="3000" -s support_tower_diameter="3.0" -s z_seam_corner="z_seam_corner_inner" -s cool_fan_speed_min="75" -s infill_offset_y="0" -s material_print_temperature_layer_0="205" -s extruder_prime_pos_abs="False" -s material="0" -s default_material_print_temperature="205" -s acceleration_print_layer_0="3000" -s dual_pre_wipe="True" -s support_line_distance="2.5" -s retraction_min_travel="1.5" -s support="0" -s support_bottom_stair_step_height="0.3" -s support_bottom_enable="False" -s speed_infill="60" -s retraction_speed="45" -s retraction_amount="3.2" -s speed_prime_tower="60" -s top_thickness="0.8" -s skirt_gap="3" -s jerk_support_infill="20" -s bottom_skin_preshrink="1.5" -s support_xy_distance_overhang="1.25" -s travel_compensate_overlapping_walls_x_enabled="True" -s raft_interface_acceleration="3000" -s raft_surface_layers="2" -s fill_outline_gaps="True" -s ironing_flow="10.0" -s top_layers="5" -s machine_nozzle_temp_enabled="True" -s alternate_extra_perimeter="False" -s skirt_brim_speed="25" -s retraction_hop="1" -s prime_blob_enable="True" -s material_extrusion_cool_down_speed="0.7" -s roofing_line_width="0.5" -s line_width="0.5" -s ironing_pattern="zigzag" -s conical_overhang_enabled="False" -s bottom_thickness="0.8" -s support_infill_rate="20" -s jerk_support="20" -s speed_support_roof="23.333333333333332" -s infill_enable_travel_optimization="False" -s mold_roof_height="0.5" -s acceleration_topbottom="3000" -s raft_interface_speed="22.5" -s speed_equalize_flow_max="150" -s raft_base_line_spacing="2.0" -s switch_extruder_retraction_amount="16" -s switch_extruder_retraction_speeds="20" -s acceleration_support_infill="3000" -s support_skip_zag_per_mm="20" -s filter_out_tiny_gaps="True" -s raft_surface_fan_speed="0" -s cross_infill_apply_pockets_alternatingly="True" -s infill_angles="[ ]" -s meshfix_maximum_resolution="0.01" -s support_roof_line_width="0.5" -s material_standby_temperature="175" -s support_tower_roof_angle="65" -s gradual_infill_steps="0" -s acceleration_infill="3000" -s skin_outline_count="1" -s cool_fan_full_at_height="0.3" -s cool_lift_head="False" -s infill_overlap="10" -s skin_preshrink="1.5" -s retraction_hop_enabled="True" -s acceleration_support="3000" -s meshfix="0" -s ironing_only_highest_layer="False" -s cool_min_speed="5" -s support_bottom_pattern="lines" -s support_bottom_line_width="0.5" -s cool_fan_full_layer="3" -s speed_travel="400" -s support_xy_overrides_z="z_overrides_xy" -s speed_travel_layer_0="250" -s speed_support="35" -s experimental="0" -s top_skin_expand_distance="1.5" -s raft_interface_thickness="0.30000000000000004" -s machine_nozzle_cool_down_speed="2.0" -s raft_interface_line_width="1.0" -s support_z_distance="0.15" -s bottom_layers="5" -s cool_fan_enabled="True" -s magic_fuzzy_skin_point_dist="0.8" -s retraction_count_max="90" -s travel_avoid_other_parts="True" -s slicing_tolerance="middle" -s travel_avoid_distance="0.625" -s cross_infill_pocket_size="10.0" -s material_final_print_temperature="205" -s layer_0_z_overlap="0.15" -s support_conical_enabled="False" -s brim_width="8.0" -s acceleration_wall_x="3000" -s dual="0" -s machine_filament_park_distance="16" -s skin_overlap="5" -s jerk_support_roof="20" -s support_roof_pattern="lines" -s zig_zaggify_infill="True" -s expand_skins_expand_distance="1.5" -s bottom_skin_expand_distance="1.5" -s brim_outside_only="True" -s support_bottom_line_distance="0.5" -s wall_line_width_0="0.5" -s skin_alternate_rotation="False" -s acceleration_ironing="3000" -s extruder_prime_pos_z="0" -s infill="0" -s wall_0_wipe_dist="0.1" -s wall_line_width="0.5" -s coasting_volume="0.1" -s machine_nozzle_tip_outer_diameter="1" -s ironing_line_spacing="0.1" -s infill_wipe_dist="0.125" -s jerk_travel="30" -s speed_layer_0="25" -s prime_tower_min_volume="10" -s support_zag_skip_count="8" -s jerk_topbottom="20" -s magic_fuzzy_skin_point_density="1.25" -s material_print_temperature="205" -s top_bottom_pattern="lines" -s cool_fan_speed_max="100" -s gradual_support_infill_steps="0" -s extruder_prime_pos_y="0" -s machine_extruder_end_pos_x="0" -s roofing_pattern="lines" -s raft_surface_thickness="0.2" -s travel_compensate_overlapping_walls_enabled="True" -s infill_before_walls="False" -s support_minimal_diameter="3.0" -s speed_topbottom="45.0" -s machine_nozzle_offset_x="0" -s top_skin_preshrink="1.5" -s machine_heat_zone_length="16" -s shell="0" -s prime_tower_flow="100" -s sub_div_rad_add="0.5" -s gradual_support_infill_step_height="1" -s ironing_inset="0.25" -s acceleration_roofing="3000" -s top_bottom_pattern_0="lines" -s spaghetti_max_height="2.0" -s machine_extruder_end_pos_y="0" -s support_interface_skip_height="0.3" -s wall_line_width_x="0.5" -s raft_surface_line_width="0.5" -s layer_start_y="0.0" -s material_initial_print_temperature="205" -s raft_fan_speed="0" -s raft_base_fan_speed="0" -s support_roof_density="100" -s magic_mesh_surface_mode="normal" -s machine_nozzle_size="0.5" -s wall_thickness="0.8" -s switch_extruder_retraction_speed="20" -s extruder_nr="0" -s support_xy_distance="1" -s raft_interface_line_spacing="1.2" -s outer_inset_first="False" -s infill_overlap_mm="0.05" -s acceleration_prime_tower="3000" -s mold_enabled="False" -s material_flow_dependent_temperature="False" -s machine_extruder_start_pos_abs="False" -s support_top_distance="0.15" -s fill_perimeter_gaps="everywhere" -s raft_base_line_width="1.0" -s z_seam_x="145.0" -s support_tree_collision_resolution="0.25" -s support_join_distance="2.0" -s material_diameter="1.75" -s top_bottom_thickness="0.8" -s acceleration_print="3000" -s infill_sparse_thickness="0.2" -s raft_surface_line_spacing="0.5" -s skirt_line_count="3" -s infill_hollow="False" -s machine_nozzle_offset_y="0" -s raft_margin="15" -s cool_min_layer_time="15" -s wall_line_count="3" -s support_tree_wall_count="1" -s raft_jerk="20" -s speed_wall="40.0" -s speed_wall_0="45.0" -s jerk_prime_tower="20" -s travel_compensate_overlapping_walls_0_enabled="True" -s acceleration_skirt_brim="3000" -s support_tree_branch_distance="4" -s multiple_mesh_overlap="0.15" -s raft_surface_jerk="20" -s acceleration_travel="5000" -s raft_base_thickness="0.36" -s jerk_print_layer_0="20" -s speed_support_interface="23.333333333333332" -s acceleration_layer_0="3000" -s min_skin_width_for_expansion="6.123233995736766e-17" -s z_seam_relative="False" -s jerk_skirt_brim="20" -s machine_extruder_start_pos_y="0" -s support_interface_enable="False" -s support_pattern="zigzag" -s machine_extruder_start_pos_x="0" -s cool_min_layer_time_fan_speed_max="20" -s initial_layer_line_width_factor="100.0" -s jerk_travel_layer_0="30.0" -s min_infill_area="0" -s cool_fan_speed="100.0" -s infill_pattern="cubic" -s coasting_speed="90" -s resolution="0" -s skin_line_width="0.5" -s raft_interface_jerk="20" -s raft_base_speed="22.5" -s speed_support_bottom="23.333333333333332" -s machine_nozzle_heat_up_speed="2.0" -s acceleration_support_interface="3000" -s extruder_prime_pos_x="0" -s retraction_retract_speed="45" -s material_guid="0ff92885-617b-4144-a03c-9989872454bc" -s spaghetti_max_infill_angle="10" -s ironing_enabled="False" -s raft_acceleration="3000" -s magic_fuzzy_skin_enabled="False" -s infill_offset_x="0" -s gradual_infill_step_height="2.0" -s meshfix_keep_open_polygons="False" -s mesh_position_x="0" -s spaghetti_infill_stepped="True" -s support_offset="0.2" -s jerk_roofing="20" -s support_bottom_distance="0.15" -s support_tree_branch_diameter="2" -s support_roof_line_distance="0.5" -s mold_width="5" -s support_infill_sparse_thickness="0.2" -s magic_fuzzy_skin_thickness="0.3" -s mold_angle="40" -s skin_overlap_mm="0.025" -s speed_equalize_flow_enabled="False" -s support_roof_height="1" -s support_interface_pattern="lines" -s infill_sparse_density="15" -s acceleration_support_roof="3000" -s machine_extruder_end_pos_abs="False" -s z_seam_type="sharpest_corner" -s wall_0_inset="0" -s cooling="0" -s raft_interface_fan_speed="0" -s support_skip_some_zags="False" -s prime_tower_purge_volume="0" -s raft_airgap="0.3" -s speed_wall_x="50.0" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s retraction_hop_after_extruder_switch="True" -s spaghetti_infill_enabled="False" -s skin_angles="[ ]" -s jerk_infill="20" -s jerk_print="20" -s support_interface_height="1" -s spaghetti_inset="0.2" -s support_connect_zigzags="True" -s retraction_hop_only_when_collides="False" -s support_interface_density="100" -s prime_tower_wipe_enabled="True" -s support_use_towers="True" -s conical_overhang_angle="50" -s raft_smoothing="5" -s jerk_wall="20" -s speed_support_infill="35" -s skirt_brim_minimal_length="200" -s platform_adhesion="0" -s jerk_wall_0="20" -s skirt_brim_line_width="0.5" -s support_interface_line_width="0.5" -s brim_line_count="3" -s material_adhesion_tendency="10" -s support_tree_branch_diameter_angle="5" -s support_conical_min_width="5.0" -s machine_nozzle_id="unknown" -s jerk_layer_0="20" -s retract_at_layer_change="False" -s speed_print="60" -s speed_roofing="45.0" -s skin_no_small_gaps_heuristic="True" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s acceleration_wall_0="3000" -s jerk_ironing="20" -s retraction_enable="True" -s max_feedrate_z_override="500" -s mesh_position_z="0" -s retraction_extra_prime_amount="0" -s mesh_position_y="0" -s support_tree_angle="40" -s spaghetti_infill_extra_volume="0" -s machine_min_cool_heat_time_window="50.0" -s speed_print_layer_0="25" -s infill_line_width="0.5" -s meshfix_extensive_stitching="False" -s coasting_min_volume="0.8" -s support_angle="40" -s switch_extruder_prime_speed="20" -s raft_base_acceleration="3000" -s command_line_settings="0" -e0 -l "0"
        2018-03-20 08:20:12,134 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend] [WARNING] There are empty layers (or layers with empty extruder plans) in the print! Temperature control and cross layer travel moves might suffer.
        2018-03-20 08:20:13,049 - DEBUG - [(11228)-MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [582]: Slicing took 3.695173978805542 seconds
        2018-03-20 08:20:13,050 - DEBUG - [(11228)-MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [591]: See if there is more to slice…
        2018-03-20 08:20:13,052 - DEBUG - [(11228)-MainThread] UM.Backend.Backend._logSocketState [181]: Socket state changed to Closing
        2018-03-20 08:20:13,053 - DEBUG - [(11228)-MainThread] UM.Backend.Backend._onSocketError [203]: Socket debug: Arcus Error (13): Closing socket because other side requested close.
        2018-03-20 08:20:13,055 - DEBUG - [(11228)-MainThread] UM.Backend.Backend._logSocketState [183]: Socket state changed to Closed
        2018-03-20 08:20:13,067 - DEBUG - [(11228)-MainThread] CuraEngineBackend.CuraEngineBackend._onBackendQuit [722]: Backend quit with return code 0. Resetting process and socket.
        2018-03-20 08:20:18,853 - DEBUG - [(11228)-MainThread] AutoSave.AutoSave._onTimeout [71]: Autosaving preferences, instances and profiles
        2018-03-20 08:20:22,291 - DEBUG - [(11228)-MainThread] Cura-DuetRRFPlugin-master.DuetRRFOutputDevice.onFilenameAccepted [144]: Filename set to: A_Semi.gcode
        2018-03-20 08:20:22,293 - DEBUG - [(11228)-MainThread] SliceInfoPlugin.SliceInfo._onWriteStarted [66]: 'info/send_slice_info' is turned off.
        2018-03-20 08:20:22,294 - DEBUG - [(11228)-MainThread] Cura-DuetRRFPlugin-master.DuetRRFOutputDevice.onFilenameAccepted [157]: Loading gcode…
        2018-03-20 08:20:22,294 - DEBUG - [(11228)-MainThread] Cura-DuetRRFPlugin-master.DuetRRFOutputDevice.onFilenameAccepted [177]: Connecting…
        2018-03-20 08:20:23,526 - ERROR - [(11228)-MainThread] Cura-DuetRRFPlugin-master.DuetRRFOutputDevice._onNetworkError [353]: _onNetworkError: 301
        2018-03-20 08:20:29,240 - DEBUG - [(11228)-MainThread] UM.Qt.QtApplication.windowClosed [345]: Shutting down cura
        2018-03-20 08:20:29,320 - DEBUG - [(11228)-MainThread] CuraEngineBackend.CuraEngineBackend._terminate [262]: Attempting to kill the engine process

        1 Reply Last reply Reply Quote 0
        • resamundefined
          resam
          last edited by

          Thanks for the log file!

          I made a few fixes and changes to the settings dialog.
          Please try v0.0.10 from https://github.com/Kriechi/Cura-DuetRRFPlugin/releases/tag/v0.0.10
          Then delete & recreate the DuetRRF settings entry and try to print something.
          Finally please paste your log file again, I'm only interested in lines which contain "Cura-DuetRRFPlugin".

          1 Reply Last reply Reply Quote 0
          • magicmarcundefined
            magicmarc
            last edited by

            y'all are the best! ill d/load the v0.0.10 this afternoon, and install it, re-create the duetrrf config, and test it out!

            also, what do i enter for the passwords:
            duet password: reprap ?

            http basic user: ?
            http auth basic password: ?

            1 Reply Last reply Reply Quote 0
            • magicmarcundefined
              magicmarc
              last edited by

              so i just tried this out (im at work so im doing remotely on my home pc…)
              however, i used the v0.0.10 and recreated the printer in the extension, gave the password 'reprap', and left the otehr 2 user / password boxes blank.

              i tried to upload to the duet-artemis (since im not there and i have something else currently printing... i tested with the 'upload' only for now...

              got the following error attmepting to upload:
              there was a network error: 3 host 173.16.31.76rr connect_not_found,

              and heres the lines from the cura.log

              2018-03-20 10:45:58,695 - DEBUG - [(13308)-Thread-9] USBPrinting.USBPrinterOutputDevice.close [413]: PrinterConnection.close: cannot join current thread (expected)
              2018-03-20 10:45:58,699 - WARNING - [(6976)-MainThread] UM.OutputDevice.OutputDeviceManager.removeOutputDevice [126]: Could not find output device with id COM5 to remove
              2018-03-20 10:48:05,492 - DEBUG - [(6976)-MainThread] Cura-DuetRRFPlugin-master.DuetRRFOutputDevice.onFilenameAccepted [143]: Filename set to: A_Semi.gcode
              2018-03-20 10:48:05,492 - DEBUG - [(6976)-MainThread] SliceInfoPlugin.SliceInfo._onWriteStarted [66]: 'info/send_slice_info' is turned off.
              2018-03-20 10:48:05,493 - DEBUG - [(6976)-MainThread] Cura-DuetRRFPlugin-master.DuetRRFOutputDevice.onFilenameAccepted [156]: Loading gcode…
              2018-03-20 10:48:05,493 - DEBUG - [(6976)-MainThread] Cura-DuetRRFPlugin-master.DuetRRFOutputDevice.onFilenameAccepted [176]: Connecting…
              2018-03-20 10:48:05,530 - ERROR - [(6976)-MainThread] Cura-DuetRRFPlugin-master.DuetRRFOutputDevice._onNetworkError [352]: _onNetworkError: 3

              1 Reply Last reply Reply Quote 0
              • resamundefined
                resam
                last edited by

                Please add a '/' at the end of your URL and try again.
                There should be a log messing like "URL set to: …"

                If you did not use M551 in your config.g, then the password should be 'reprap' or blank.

                If you don't know what HTTP basic auth is, then leave those fields empty. If you run a reverse proxy to access DWC which adds HTTP basic auth, then you could specify your credentials here.

                1 Reply Last reply Reply Quote 0
                • magicmarcundefined
                  magicmarc
                  last edited by

                  PRESTO, i restarted after adding the '/' and it uploaded to the duet! you are the best. i love support forums with experts and creators!
                  ill follow up when i get home to the actual system/printer and try to 'print to the duet/artemis'!!!

                  1 Reply Last reply Reply Quote 0
                  • resamundefined
                    resam
                    last edited by

                    Great! I'll try to make it a bit smarter and add the final '/' automatically.

                    Just as a small follow up, since I don't have a Windows machine myself:
                    Do the two dialog windows look good? Too small or too big? Are all the labels/headers legible?

                    1 Reply Last reply Reply Quote 0
                    • magicmarcundefined
                      magicmarc
                      last edited by

                      they look / seem great! i've attached links to the pics of the screenshots.

                      screenshots:

                      https://drive.google.com/file/d/1OJot52kcPcI_lhu6eXJbHUt2grTq9hHb/view?usp=sharing

                      https://drive.google.com/file/d/1MJ1EgVX3GVRuyfEY9jKrvdYvZwxhH1is/view?usp=sharing

                      1 Reply Last reply Reply Quote 0
                      • Guyarosundefined
                        Guyaros
                        last edited by

                        DuetRRF Cura plugin doesn't work with Cura 3.3 or 3.3.1
                        I followed the exact installation instruction, on 2 different computers, but still no luck.
                        any solutions?
                        Thanks,

                        1 Reply Last reply Reply Quote 0
                        • resamundefined
                          resam
                          last edited by

                          @Guyaros do you get any error messages or does it simply not show up?
                          I'm running the Cura 3.3 beta without issues.

                          Make sure to use the latest DuetRRF-Cura plugin from GitHub!

                          Guyarosundefined 1 Reply Last reply Reply Quote 0
                          • Guyarosundefined
                            Guyaros @resam
                            last edited by

                            @resam said in DuetRFF Cura plugin - not working/recognizing in cura?:

                            DuetRRF-Cura plugin

                            Thanks for your reply.

                            it simply not show up in Cura.

                            I've downloaded Cura-DuetRRFPlugin-0.0.16.zip from this link:
                            link text

                            resamundefined 1 Reply Last reply Reply Quote 0
                            • resamundefined
                              resam @Guyaros
                              last edited by

                              @guyaros and where did you extract it?
                              can you please show me the folder structure of your Cura config directory?

                              Guyarosundefined 1 Reply Last reply Reply Quote 0
                              • Guyarosundefined
                                Guyaros @resam
                                last edited by

                                @resam
                                0_1524912496822_CuraPlugin.jpg

                                1 Reply Last reply Reply Quote 0
                                • resamundefined
                                  resam
                                  last edited by

                                  Ok, this looks right.

                                  Can you please start Cura and then check your Cura log file for any lines with Cura-DuetRRFPlugin? The log file should be in ....\AppData\Roaming\cura\3.3\cura.log.
                                  You only need to check near the end of the file, as it is probably quite long.

                                  1 Reply Last reply Reply Quote 0
                                  • Guyarosundefined
                                    Guyaros
                                    last edited by Guyaros

                                    @resam

                                    0_1524913637395_CuraPluginErrorLog.jpg

                                    1 Reply Last reply Reply Quote 0
                                    • resamundefined
                                      resam
                                      last edited by

                                      Remove the -.0.0.16 from the Cura-DuetRRFPlugin folder name - then it should work!

                                      1 Reply Last reply Reply Quote 1
                                      • Guyarosundefined
                                        Guyaros
                                        last edited by Guyaros

                                        Thank you very much!
                                        now it's working. 👍

                                        1 Reply Last reply Reply Quote 0
                                        • First post
                                          Last post
                                        Unless otherwise noted, all forum content is licensed under CC-BY-SA