• Tags
  • Documentation
  • Order
  • Register
  • Login
Duet3D Logo Duet3D
  • Tags
  • Documentation
  • Order
  • Register
  • Login

Firmware 2.0RC4 released

Scheduled Pinned Locked Moved
Firmware installation
6
18
3.1k
Loading More Posts
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • undefined
    dc42 administrators @zerspaner_gerd
    last edited by 20 May 2018, 17:23

    @zerspaner_gerd said in Firmware 2.0RC4 released:

    @dc42
    Has nothing changed, it seems that about 3-10 sec works after that everything is frozen like (temperature does not fluctuate anymore)

    On the device where the update was recorded, the problem does not seem to occur. Here only the gcode files are not complete.
    Both Windows 10 with Google Chrome

    I'm back on web interface version: 1.21, it works on both devices.

    Did you try clearing the browser cache? I had to do that after upgrading DWC.

    If the problem persists, please open the debugging console in your browser by pressing control-shift-J and see if any Javascript exceptions have been logged.

    You can use DWC 1.21 with RRF 2.0RC4 if necessary.

    Duet WiFi hardware designer and firmware engineer
    Please do not ask me for Duet support via PM or email, use the forum
    http://www.escher3d.com, https://miscsolutions.wordpress.com

    undefined 1 Reply Last reply 21 May 2018, 14:13 Reply Quote 0
    • undefined
      dc42 administrators @hurzhurz
      last edited by 20 May 2018, 17:24

      @hurzhurz said in Firmware 2.0RC4 released:

      I just discovered that the Duet crashes when I open the DWC using Internet Explorer.
      After looking with Wireshark, I can say this request causes it... the crash also happens when I send it via putty directly to port 80:

      GET /fonts/glyphicons.eot? HTTP/1.1
      Accept: /
      Referer: http://192.168.2.23/
      Accept-Language: de-DE
      User-Agent: Mozilla/5.0 (Windows NT 10.0; WOW64; Trident/7.0; rv:11.0) like Gecko
      Origin: http://192.168.2.23
      Accept-Encoding: gzip, deflate
      Host: 192.168.2.23
      Connection: Keep-Alive
      Cache-Control: no-cache

      I have also tested some older versions: 2.0RC1 crashes, but 1.21 not.

      Here is the output of M122 after a crash:
      0_1526726134777_M122.txt

      Oh, and the reason for trying Internet Explorer was that the DWC always scrolls to the top every few seconds... at least with Firefox and Chrome.

      EDIT/UPDATE:
      Looks like it doesn't like the "?" at the end of the URI.
      Working: "/fonts/glyphicons.eot" or "/fonts/glyphicons.eot?aa=aa"
      Causing crash: "/fonts/glyphicons.eot?" or "/fonts/glyphicons.eot?aa"

      I confirm this bug. I have found the cause and the fix will be in the next RC, or the 2.0 release if there isn't another RC.

      Duet WiFi hardware designer and firmware engineer
      Please do not ask me for Duet support via PM or email, use the forum
      http://www.escher3d.com, https://miscsolutions.wordpress.com

      1 Reply Last reply Reply Quote 0
      • undefined
        dc42 administrators @Catalin_RO
        last edited by 20 May 2018, 17:25

        @catalin_ro said in Firmware 2.0RC4 released:

        I did some machining on the WorkBee with 2.0RC4 and found no issues apart from the already known incompatibility with trochoidal machining GCode generated by CamBam. I used "classic" machining patterns and all OK.

        Thanks for your feedback!

        Duet WiFi hardware designer and firmware engineer
        Please do not ask me for Duet support via PM or email, use the forum
        http://www.escher3d.com, https://miscsolutions.wordpress.com

        1 Reply Last reply Reply Quote 0
        • undefined
          dc42 administrators
          last edited by dc42 20 May 2018, 19:47

          I have put a new firmware binary (RC4a) in the EdgeRelease folder at https://github.com/dc42/RepRapFirmware/tree/v2-dev/EdgeRelease. Please can those of you having problems connecting a browser try it. It fixes the issue of Internet Explorer causing the Duet to reboot, and may help in other cases too.

          Duet WiFi hardware designer and firmware engineer
          Please do not ask me for Duet support via PM or email, use the forum
          http://www.escher3d.com, https://miscsolutions.wordpress.com

          1 Reply Last reply Reply Quote 0
          • undefined
            Dr_Ju_Ju
            last edited by 21 May 2018, 09:37

            FYI
            installed ok:
            Firmware Name: RepRapFirmware for Duet 2 WiFi/Ethernet
            Firmware Electronics: Duet Ethernet 1.02 or later
            Firmware Version: 2.0(RTOS)RC4 (2018-05-17b2)
            Web Interface Version: 1.21.1-RC4

            Successfully printed a large print, but subsequent to that the Web browser (Firefox) threw a Javascript error (unfortunately I couldn't capture the exact error) but the only recovery was to re-set the board.

            Julian,

            Old goat, learning new things….

            1 Reply Last reply Reply Quote 0
            • undefined
              zerspaner_gerd @dc42
              last edited by zerspaner_gerd 21 May 2018, 14:13

              @dc42 said in Firmware 2.0RC4 released:

              @zerspaner_gerd said in Firmware 2.0RC4 released:

              @dc42
              Has nothing changed, it seems that about 3-10 sec works after that everything is frozen like (temperature does not fluctuate anymore)

              On the device where the update was recorded, the problem does not seem to occur. Here only the gcode files are not complete.
              Both Windows 10 with Google Chrome

              I'm back on web interface version: 1.21, it works on both devices.

              Did you try clearing the browser cache? I had to do that after upgrading DWC.

              If the problem persists, please open the debugging console in your browser by pressing control-shift-J and see if any Javascript exceptions have been logged.

              You can use DWC 1.21 with RRF 2.0RC4 if necessary.

              Yes,
              update:
              With web interface version: 1.21 and with firmware version: 2.00RC4

              • Not all gcode files are displayed
              • I can not upload gcode files, message says Upload Complete, but gcode is not listed.
                Again on firmware version: 1.21 all gcode files will be displayed (on DWC) even those over firmware version: 2.00 have been uploaded (they will not be displayed on the panel).

              No matter which browser (Chrome, Internet Explorer, Edge)

              I have several devices that access the Duet

              The updating / freezing problems are gone with this combination. Like in this video https://www.dropbox.com/s/iy93ev9hi6bhizy/duet web interface.wmv?dl=0

              What else can I try?

              Here are pictures with debugging console:

              0_1526911632690_Inked2.0(RTOS)RC4 (2018-05-17b2)_LI.jpg 2.0(RTOS)RC4 (2018-05-17b2

              0_1526911653461_Inked1.21 (2018-03-21)_LI.jpg 1.21 (2018-03-21)

              @dc42 said in Firmware 2.0RC4 released:

              I have put a new firmware binary (RC4a) in the EdgeRelease folder at https://github.com/dc42/RepRapFirmware/tree/v2-dev/EdgeRelease. Please can those of you having problems connecting a browser try it. It fixes the issue of Internet Explorer causing the Duet to reboot, and may help in other cases too.

              When installing this error comes
              0_1526911249872_Firmware Update Fehler.JPG

              Board: Duet WiFi 1.03 | Firmware Version: 3.1.1 | WiFi Server Version: 1.23 | Web Interface Version: 3.1.1

              1 Reply Last reply Reply Quote 0
              • undefined
                dc42 administrators
                last edited by 21 May 2018, 14:54

                The "not valid for this electronics" message means that you have downloaded the firmware binary incorrectly. Follow the links (don't right click on them) until you reach a page with a Download button.

                Duet WiFi hardware designer and firmware engineer
                Please do not ask me for Duet support via PM or email, use the forum
                http://www.escher3d.com, https://miscsolutions.wordpress.com

                undefined 1 Reply Last reply 21 May 2018, 18:04 Reply Quote 0
                • undefined
                  zerspaner_gerd @dc42
                  last edited by 21 May 2018, 18:04

                  @dc42 said in Firmware 2.0RC4 released:

                  The "not valid for this electronics" message means that you have downloaded the firmware binary incorrectly. Follow the links (don't right click on them) until you reach a page with a Download button.

                  Sorry, my mistake.

                  But other mistakes are still there
                  Here are my problems via video

                  gcode disappear on update from firmware version: 2.0
                  https://www.dropbox.com/s/y7wop43cqoyzuiv/gcode disappear.wmv?dl=0

                  Uploaded gcode will not be displayed
                  https://www.dropbox.com/s/l49s4x2d91fjcf6/Upload gcode problem.wmv?dl=0

                  Can that be that the file name is too long? With short works the upload.
                  But why do not all disappear too long?
                  But with 1:21 I have no problems with it!

                  Board: Duet WiFi 1.03 | Firmware Version: 3.1.1 | WiFi Server Version: 1.23 | Web Interface Version: 3.1.1

                  1 Reply Last reply Reply Quote 0
                  • undefined
                    WalterSKW
                    last edited by 21 May 2018, 18:14

                    I do have the same issue.
                    After uploading a file, I cannot find it in the list. On the panel due I however, I can select and print the file succesfully.

                    Firmware Name: RepRapFirmware for Duet 2 WiFi/Ethernet
                    Firmware Electronics: Duet WiFi 1.02 or later
                    Firmware Version: 2.0(RTOS)RC4 (2018-05-17b2)
                    WiFi Server Version: 1.21
                    Web Interface Version: 1.21

                    Brian once said: "Always look at the bright side of life"
                    Works for me!

                    undefined 1 Reply Last reply 22 May 2018, 00:13 Reply Quote 0
                    • undefined
                      Catalin_RO @WalterSKW
                      last edited by 22 May 2018, 00:13

                      @walterskw Why is the DWC v1.21? With latest firmware you need the latest DWC beta (1.21.1-RC4) for proper functionality, as specified in the WhatsNew document.

                      1 Reply Last reply Reply Quote 0
                      • undefined
                        dc42 administrators
                        last edited by 22 May 2018, 16:19

                        Firmware 2.0RC5 is out so I have started a new thread for it and I am closing this one.

                        Duet WiFi hardware designer and firmware engineer
                        Please do not ask me for Duet support via PM or email, use the forum
                        http://www.escher3d.com, https://miscsolutions.wordpress.com

                        1 Reply Last reply Reply Quote 0
                        17 out of 18
                        • First post
                          17/18
                          Last post
                        Unless otherwise noted, all forum content is licensed under CC-BY-SA