PanelDue firmware 1.21 released

dc42

I have just released new PanelDue firmware at https://github.com/dc42/PanelDueFirmware/releases/tag/1.21. The changes in this release are:

New and changed features:

Recognise and display Standby status from RepRapFirmware
Added support for Spanish language (thanks 3DOeste!)
Disabled Czech language support on 4.3" builds because the extended font is not correct
Added support for Marlin hosts
Settings are saved and restarts are done automatically as needed when settings are changed
Added last modified time to file information (thanks Kriechi!)
Added estimated or simulated print time to file information (needs RepRapFirmware 2.0 or 1.21.1)
Added colour gradient on Setup page to help manufacturing test

Bug fix:

If in the Macros popup you went into a subdirectory, the display and operation of the 4 macros shown on the Control page was affected

zerspaner_gerd

Upgrading and selecting the firmware file for the Duet hardware is not that easy.

Which firmware do I need?

Thanks for your help

Phaedrux

@zerspaner_gerd I believe you would want:

Phaedrux

dc42

I am closing this thread because PanelDue firmware 1.21.2 is now current.