bltouch retraction when homing
-
Good Morning.
Is it possible that the homimg button of the web control includes the bltouch retract function?
a greeting.
-
If you are using recent firmware then deployment and retraction of the Z probe should happen automatically if you are using G30 to home Z.
-
but pressing homing all that is a G28 does not. I have a kossel.
-
So you are not homing Z using the BLTouch. In that case, the BLTouch should already be retracted when you start. If you want to make sure, you can put the M280 command to retract and/or reset the BLTouch at or near the end of config.g, or in homedelta.g.
-
@dc42 said in bltouch retraction when homing:
So you are not homing Z using the BLTouch. In that case, the BLTouch should already be retracted when you start. If you want to make sure, you can put the M280 command to retract and/or reset the BLTouch at or near the end of config.g, or in homedelta.g.
Ok. thanks
