bltouch retraction when homing

[adri84dj]

Good Morning.

Is it possible that the homimg button of the web control includes the bltouch retract function?

a greeting.

[dc42]

If you are using recent firmware then deployment and retraction of the Z probe should happen automatically if you are using G30 to home Z.

[adri84dj]

@dc42

but pressing homing all that is a G28 does not. I have a kossel.

[dc42]

So you are not homing Z using the BLTouch. In that case, the BLTouch should already be retracted when you start. If you want to make sure, you can put the M280 command to retract and/or reset the BLTouch at or near the end of config.g, or in homedelta.g.

[adri84dj]

@dc42

@dc42 said in bltouch retraction when homing:

So you are not homing Z using the BLTouch. In that case, the BLTouch should already be retracted when you start. If you want to make sure, you can put the M280 command to retract and/or reset the BLTouch at or near the end of config.g, or in homedelta.g.

Ok. thanks