Clarify Documentation for G-Code G0 & G1 S2/S3 Parameter

[token47]

There is no place in the documentation of G0 & G1 that states exactly what S2 and S3 parameters do. There is a note which talks about a delta but nothing else. I think that could be improved.

I don't feel confident to edit the page myself (it seems possible for me to edit the page but I rather not, at least before receiving more opinions for the change).

[Danal]

Added table after notes in G0 / G1.

See if that clarifies...

[token47]

The table is nice way to put that information, I think it's fine!

I think S2 does a move ignoring endstops and without being homed. The way it's there now S2 seems equal to S0 on cartesians. Is that right?

Thank you for the editting!

[dc42]

Yes on a Cartesian S2 behaves like S0 except that it doesn't mind if the printer hasn't been homed.

[wilriker]

I have further edited the documentation. I fixed some copy-and-paste errors and added the information about S2 also ignoring homing status. Also I clarified that any user of 2.02 can use Hnnn but Laser Mode users are required to do so.

I still don't find this very intuitive or easy to understand but right now I have no idea on how to further improve it.

[Danal]

Thanks for the input and edits!! That's the exact spirit of a Wiki, and I was hoping that adding the table would get "other sets of eyes" to make things even better.

Great community.

[token47]

@wilriker and @Danal Thank you!! It's much better now. I think the most important missing piece was the "ignore homing" part of S2, which is there now. Thank you again.