Homing Problems
-
I am having Problems with the homing setup of my CoreXY machine.
Both switches are in the right rear corner, so i choose "at high end" in the online configurator.
The x axis already works but the y axis drives in the wrong side.
Movement of both steppers drives in the right direction.Thanks for your help
-
@nottub give this a read.
https://duet3d.dozuki.com/Wiki/ConfiguringRepRapFirmwareCoreXYPrinter#Section_Movement_section
You may need to reverse the direction of the Y drive. That section will help you verify motor direction.
Also verify that your homing files move the axis in the correct direction. 0,0 origin should be in the front left corner so your homed position would be the back right at 300,300 or however big your printer bed is.
-
Thanks for the info.
I accidentaly interchanged the the x and y stepper on the duet.