power supply for duet3d wifi

[sunilmulti]

any one please help me to find the power supply for duet3d wifi, and please provide voltage and amp of the duet3d

[dc42]

https://duet3d.dozuki.com/Wiki/Choosing_the_power_supply

[PlasticMetal]

I've installed a Meanwell 150W @ 24V in the printer I'm currently building, but had used a Meanwell 150W @ 12V supply previously in my delta. Neither has to power the bed heater, as it's 120VAC.

[uk25]

I used 203w /12v PSU from Xbox 360 for my two printers... and very happy with that. It has an active cooling but it is really silent, not like most common PSUs. Also, it is very good looking )

[sunilmulti]

@dc42 Sir if i used 24v with 20A power supply for duet3d ,is this ok for our duet wifi microcontroller? , and i seen documents there is not mention how much ampere required for duet wifi.

[dc42]

See the link I posted earlier, it includes the current drawn by the Duet.

[Danal]

The Duet itself draws a trivial amount of power, compared to the Nozzle Heater, Fans, etc. The bed also draws a lot, and I didn't mention it because it could be on the same power supply, or separate.

When I say "Trivial", think of a drop of water in an entire cup.

Another way to phrase: Calculate for your heaters and fans. Allow a good "margin" or "pad" (because power supply ratings are often optimistic), and don't worry about the current for the board itself.