Fresh install, cannot home axis

Cresty

Hi, i upgraded my Tevo Little monster (delta style printer) to duet wifi. After installing the firmware i cant even home the printer, the motors move chaotically and never stops. It seems like i did a bad wiring but i triple checked it and even after having redone all the contacts it still is not working. Any idea?

ayudtee

I'd first test each motor individually to make sure they are running in the right direction:
https://duet3d.dozuki.com/Wiki/ConfiguringRepRapFirmwareDeltaPrinter.

dc42

@ayudtee said in Fresh install, cannot home axis:

I'd first test each motor individually to make sure they are running in the right direction:
https://duet3d.dozuki.com/Wiki/ConfiguringRepRapFirmwareDeltaPrinter.

And after that, test the endstops using M119 or the Machine Properties page of DWC.