JTech Laser

[Zandr]

I was looking at how to setup a laser with the DUET wifi and i know there is a how to here https://duet3d.dozuki.com/Wiki/Laser_PWM_control but insted of making a board buy a laser kit from JTech.

They have a page https://jtechphotonics.com/?page_id=5802 that shows how to connect to a Melzi Board as well as other how to pages.

Would this work using JTech laser driver and linking the 2 wires from the laser board to fan0 ?

Thanks in advance

[dc42]

If it works with a Melzi fan output then it should work with a Duet fan output too. The product page says it has an optically isolated control input accepting 2.8V to 36V, which confirms that.

[Zandr]

Thank you