Fallback procedure #3 = DuetWifiServen.bin not found
-
Hi,
Out of a sudden, my new motherboard stopped connecting to the wifi. I had installed the latest firmware prior this happening.
I tried to connect the motherboard to the PC, nothing happened.
It turns out the SDcard failed, I tried connecting the card to PC, nothing appeared, so I spent 9€ and got me a new one.Now, I followed every step on Fallback Procedure #3, I downloaded SamBa,
downloaded DuetCombinedFirmware 2.02 version, send the file to SD card via SamBa.
Then I open YAT, hit M997 S1 command and getM997: File DuetWiFiServer.bin not found.
Am I missing something here???
-
@cozyp DuetWiFiServer.bin is not in DuetCombinedFirmware.bin. It's further down this page: https://github.com/dc42/RepRapFirmware/releases
-
Okay. I grabbed the DuetWifiServer.bin file from an earlier version, removed the version and renamed it as DuetWifiServer.bin. The same error occurs.
I tried installing an earlier version 2.01 and 2.00. Sent the CombinedFirmare.bin via SamBa, reset the motherboard, insert SD card, copy DuetWifiServer.bin file ( if the file name was had the version name, I deleted it and renamed it exactly as it is supposed to be ). I put SD card back, reset, YAT, hit M997 S1, same....
Faulty motherboard???
-
@cozyp, the DuetWiFiServer.bin file needs to be in the /sys folder.
-
The SD card does not have any folders, even after I send the Firmware via the SamBa. Do I need to create folders???
-
I am currently stuck. On the fallback procedure it doesn't mention anything regarding SD configuration..... It just says hit erase button, use Samba and YAT to command.....
-
OK. I downloaded the entire ZIP file from latest firmware.
Extracted the SD image folder to SD card.
I renamed an the folder sys - Fisher to sys.
Copy - Pasted the Combined2Firmware and DuetWifiServer.bin.
Hit M115, firmware installed.
Hit M997 S1, ''not found'' -
If you send M20, does it report that the SD card is mounted?
If you send M503, does it echo the config.g file in /sys? -
Magically, I changed the USB port into another one, repeated the procedure and it worked.
I will never understand electronics.....Thank you for your replies DC42!!!! Will create another post on bed leveling piezo issue I was having. Hopefully, I will solve that as well!!!!
