Failed to load height map
-
k what could b the reason for this error?
Error: G29: Failed to load height map from file heightmap.csv: invalid grid
i dont have probe yet on my delta so im using the manual leveling, and trying to save to height map so i dont have to constantly do it, but im getting error massage, what cud b the prob
-
It doesn't seem to like what ever you have configured in your M557 grid layout command.
If you send M557 in the console what does it return?
-
grid not defined
-
ok the how do i save grid in correctly
-
-
@hyppo said in Failed to load height map:
grid not defined
You must have defined a grid using M557 before you did the manual mesh probing. Put that same M557 command in config.g.
-
here to i add the g29 s0 after probing or b4?