Expanding file listings in settings and in the macros list.

JKaechler · 6 Jan 2019, 03:55

Hi all
I have a Duet WiFi,
RepRapFirmware for Duet 2 WiFi/Ethernet
Firmware Electronics: Duet WiFi 1.02 or later
Firmware Version: 1.21 (2018-03-21)
WiFi Server Version: 1.21
Web Interface Version: 1.22.6

In my settings screen, where you go to edit files they are continually being re-listed. Similar issue with the Macro listings. It duplicates so far that it is bogging down the web browser. Apparently endlessly.

What am I doing wrong here?

Phaedrux · 6 Jan 2019, 04:20

You may want to try updating your main firmware version. I think you're rather out of step with your DWC version.

JKaechler · 6 Jan 2019, 17:17

Thanx much!

That fixed it. i had missed that I was out of step on those updates.

PProvost · 4 Feb 2019, 20:42

I just experienced this today.

Upgraded to Release 2.02 from 1.19. Per the instructions, I uploaded Duet2Firmware-2.02.zip via the control panel. I just unpacked the zip file and when it offered to upgrade, I said yes.

I am now experiencing the same infinite file loading problem as the OP, on all file listings (macros, system files, etc.) in the web interface.

Here are the versions currently reported by the web interface:

Firmware Name: RepRapFirmware for Duet WiFi
Firmware Electronics: Duet WiFi 1.0
Firmware Version: 1.19.2 (2017-09-01)
WiFi Server Version: 1.22
Web Interface Version: 1.22.6

I tried manually installed the 1.22 DuetWebControl.zip (rename old www folder and extract into a new one), but this had the same result.

Phaedrux · 4 Feb 2019, 21:10

You're still on 1.19.2 based on that version report.

Download this zip file: Duet2Firmware-2.02a.zip https://github.com/dc42/RepRapFirmware/releases/download/2.02/Duet2Firmware-2.02a.zip

Extract it to a folder. Then use the DWC system tab to upload iap4e.bin and iap4s.bin, then upload Duet2CombinedFirmware.bin. It should prompt you to update the firmware. If not, you may need to rename the file to DuetWiFiFirmware.bin and upload it again.

dc42 · 4 Feb 2019, 21:38

Phaedrux is right, see https://duet3d.dozuki.com/Wiki/Installing_and_Updating_Firmware#Section_Upgrading_a_Duet_2_WiFi_or_Ethernet_to_firmware_1_21_or_later_from_1_20_or_earlier.

PProvost · 4 Feb 2019, 22:59

@phaedrux said in Expanding file listings in settings and in the macros list.:

You're still on 1.19.2 based on that version report.

Download this zip file: Duet2Firmware-2.02a.zip https://github.com/dc42/RepRapFirmware/releases/download/2.02/Duet2Firmware-2.02a.zip

Extract it to a folder. Then use the DWC system tab to upload iap4e.bin and iap4s.bin, then upload Duet2CombinedFirmware.bin. It should prompt you to update the firmware. If not, you may need to rename the file to DuetWiFiFirmware.bin and upload it again.

That fixed it. Now I'm seeing this in Settings:

Firmware Name: RepRapFirmware for Duet 2 WiFi/Ethernet
Firmware Electronics: Duet WiFi 1.0 or 1.01
Firmware Version: 2.02(RTOS) (2018-12-24b1)
WiFi Server Version: 1.21
Web Interface Version: 1.22.6

Do I need to update the WiFI Server and Web Interface as well?

Phaedrux · 4 Feb 2019, 23:07

Now that you have the main firmware up to date you should be able to use the normal full update method. Take the full 2.02 zip file that I told you to extract above, but this time just upload the whole zip file without extracting it. It should update everything you need to the latest. Same procedure going forward.

dc42 · 5 Feb 2019, 06:34

It's the 2.02a zip tbat contains the new version of DuetWiFiServer.