Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Z +- 0.05 or 0.1 not available via phone web control

    Scheduled Pinned Locked Moved
    Duet Web Control wishlist
    3
    4
    525
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • CozyPundefined
      CozyP
      last edited by

      Hi all,

      I was using an old duetwifiserver file and I changed to the latest one, 1.22. I noticed that when I try to control Z axis through web on my phone ( iOS safari ) only +- 0.5, +-5 and +-25 are available.
      This is kinda nuisance when try to position the Z axis manually before the start of every print, as the 0.5 movement is HUGE.
      Is there any possibility to change this manually?

      Thank you for your time!

      1 Reply Last reply Reply Quote 0
      • Phaedruxundefined
        Phaedrux Moderator
        last edited by

        What version of DWC and firmware are you using?

        You should be able to specify the baby stepping amount in Settings > User Interface tab.

        https://duet3d.dozuki.com/Wiki/Duet_Web_Control_Manual#Section_User_Interface

        Z-Bot CoreXY Build | Thingiverse Profile

        1 Reply Last reply Reply Quote 0
        • CozyPundefined
          CozyP
          last edited by

          I didn\t know that you could change the values with right click. DAYUM!!!
          Thanks

          1 Reply Last reply Reply Quote 0
          • NeoandGeoundefined
            NeoandGeo
            last edited by

            Also when you change one side with right click, the other side reflects the change too.

            1 Reply Last reply Reply Quote 0
            • First post
              Last post
            Unless otherwise noted, all forum content is licensed under CC-BY-SA