• Tags
  • Documentation
  • Order
  • Register
  • Login
Duet3D Logo Duet3D
  • Tags
  • Documentation
  • Order
  • Register
  • Login

Connected to access point but Site can't be reached

Scheduled Pinned Locked Moved Solved
Duet Web Control
2
4
381
Loading More Posts
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • undefined
    chriskimbr
    last edited by 21 Feb 2019, 06:26

    Duet2Wifi M552
    WiFi module is connected to access point ButterBean, IP address 192.168.1.42<LF>ok<LF>

    When i go to ipaddress in http://192.168.1.42 get error;
    "This site can't be reached".

    Any ideas on why webpage won't load? It was working then stopped.

    1 Reply Last reply Reply Quote 0
    • undefined
      dc42 administrators
      last edited by 21 Feb 2019, 07:18

      Two common reasons:

      1. Wifi signal strength too low. Send M122 and look for the WiFi signal strength (RSSI) in the report.

      2. Your router has stopped talking to the Duet. Try rebooting the router.

      Duet WiFi hardware designer and firmware engineer
      Please do not ask me for Duet support via PM or email, use the forum
      http://www.escher3d.com, https://miscsolutions.wordpress.com

      undefined 1 Reply Last reply 21 Feb 2019, 08:13 Reply Quote 0
      • undefined
        chriskimbr @dc42
        last edited by 21 Feb 2019, 08:13

        @dc42 Fixed it.

        in config.g file...

        was set to this for some reason;
        M552 S0 ;Disable HTTP

        Needs to be ;
        M552 S1 Enable HTTP

        1 Reply Last reply Reply Quote 0
        • undefined
          dc42 administrators
          last edited by 21 Feb 2019, 08:25

          I didn't think of that! I'm glad you solved it.

          Duet WiFi hardware designer and firmware engineer
          Please do not ask me for Duet support via PM or email, use the forum
          http://www.escher3d.com, https://miscsolutions.wordpress.com

          1 Reply Last reply Reply Quote 0
          4 out of 4
          • First post
            4/4
            Last post
          Unless otherwise noted, all forum content is licensed under CC-BY-SA