IR probe values wrong (SOLVED)
-
Hi all, I've got weird issue I dunno what to do about. I just cleaned up the wiring on my new printer, but now DC42's IR sensor is giving strange values. It hovers around 130 and drops to 90-ish when triggered. The light blinks 4 times on boot as expected.
Any thoughts?
Thanks,
Del -
Sorry for the bump, but I've been farting around with it over the weekend. Mostly, what should the duet WiFi show when there is no z-probe plugged in? It's hovering around 250 which seems off for something that isn't plugged in.
Anyway thanks again,
Del -
Quick reply for the next person who searches
So I figured out I had too many connectors between the probe and the board... probably too much resistance? Anyway a direct connection fixed the problem. Working probe > nice wires any day.
Del
-
@planeguy, I'm glad you solved it.
