"PanelDue Request": M291 x&y jogmenue (like in webinterface)
-
Hi,
would be so cool to be able to jog within some macros & onscreen-menues on a cartesian buildup combined x&y (I know this is for lazy people, because you could jog to your desired position BEFORE calling a macro, but that request is only partly for me but also for somebody else
)
It already works on the web as I learned and can confirm, as discussed in another post... just reposting as official request here...
M291 P"text" S3 X1:Y1
AND I can imagine this is easier for the larger screens but might be more difficult on the smaller screens... -
Added to the work list!
Duet WiFi hardware designer and firmware engineer
Please do not ask me for Duet support via PM or email, use the forum
http://www.escher3d.com, https://miscsolutions.wordpress.com -
@dc42
Cool!
(And as already written somewhere for DWC, here for the PanelDue, for Z, could the up&down arrows be changed to "|> -z <| "(bring together) and "|< +z >|"(spread apart) because in my setup with a "ultimaker-style-gantry" the "up-arrow" equals to "plate-down" and vice versa and that is risky to one day sooner or later doing it wrong...)
Edit: And same is with babysteps
