manual bed levelling and using multiple independent Z motors ?
-
I have a Anet A8 cartesian printer, with two Z motor, each on independent driver (Z and E1).
which is the better : manual bed levelling assistant or Bed levelling using multiple independent Z motors ?
It's possible to combine the two method ? -
Bed levelling using multiple independent Z is for adjusting the 2 z axis because they can become out of sync.
mesh bed leveling is for correction of uneven print surfaces.normally you would do both.
-
@veti said in manual bed levelling and using multiple independent Z motors ?:
mesh bed leveling
I'm not speak about mesh bed leveling, but manual bed levelling, for level the bed with the four srew at each corner.
-
on the anet a8 you will still need to do corner leveling now and then because the springs and y gantry quality is severely lacking. the independant z leveling can only correct it for the x plane and not the y plane.
