reprapfirmware congig tool
-
-
Has been some time since i have been able to work on this. have been working in Dominican Republic to relocate some of our equipment, but now back at starting on this. I took a look at the config tool page and it did not show a option for setting up a x,y,z axis type machine with a extruder . Which option should you choose, or is it considered a custom setup? Thanks
-
@irondesk40 said in reprapfirmware congig tool:
Has been some time since i have been able to work on this. have been working in Dominican Republic to relocate some of our equipment, but now back at starting on this. I took a look at the config tool page and it did not show a option for setting up a x,y,z axis type machine with a extruder . Which option should you choose, or is it considered a custom setup? Thanks
Unless your machine is one of the few models listed, choose Custom.
